DOI QR코드

DOI QR Code

소수력 발전용 고효율 100kW 발전기의 설계해석 및 경제성 분석

Design Analysis and Economic Analysis of high Efficiency 100kW Generator for Hydro Power System

  • Jee, In-Ho (Taechang N.E.T Co., Ltd.) ;
  • Kang, Seung-Jin (School of Knowledge based Technology and Energy, Korea Politechnic Univerity)
  • 투고 : 2015.10.30
  • 심사 : 2016.02.19
  • 발행 : 2016.03.01

초록

This paper shows the design of the 100 kW IPMSG for small hydraulic power generator. The high-efficient generator, method of the dual layer interior permanent magnet was studied to improve the method of the single layer interior permanent magnet, which is mostly used. Analysis of magnet arrangement and cogging torque was done by FEM. According to structure analysis of dual layer interior permanent magnet, the amount of usage of the permanent magnet was reduced and cogging torque was decreased as well. With these successful results, the high-efficient generator design was accomplished. Based on the results of the structure analysis, the test product was designed and manufactured. And the design values and performance outputs were compared and verified with success. Also, the economic feasibility was conducted based on the electric power generated from the test product installed at the site. By the B/C analysis, in case that only SMP was analyzed, B/C ratio was 1.24 at the discount ratio of 5.5%, which considered to be economically feasible. The study is expected to be used for the application of developing large scale high-efficient interior permanent magnet synchronous generator.

키워드

참고문헌

  1. Dariusz Borkowski, Tomasz Wegiel, "Small Hydropower Plant With Integrated Turbine-Generators Working at Variable Speed", IEEE Trans. Energy Conversion, vol. 28, no. 2, pp. 452-459, 2013. https://doi.org/10.1109/TEC.2013.2247605
  2. Manuel Pinilla, "Performance Improvement in a Renewable Energy Direct Drive Permanent Magnet Machine by means of Soft Magnetic Composite Interpoles", IEEE Trans. Energy Conversion, vol. 27, no. 2, pp. 440-448, 2012. https://doi.org/10.1109/TEC.2012.2187295
  3. Z. Q. Zhu, S. Ruangsinchaiwanich, and D. Howe, "Synthesis of cogging-torque waveform form analysis of a single stator slot", IEEE Trans. Industry Applications, vol. 42, no. 3, pp. 650-657, 2006. https://doi.org/10.1109/TIA.2006.872930
  4. R. Islam, I. Husain, A. Fardoun, and K. McLaughlin, "Permanent-magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction", IEEE Trans. Industry Applications, vol. 45, no. 1, pp. 152-160, 2009. https://doi.org/10.1109/TIA.2008.2009653
  5. Duane C. Hanselman, "Brushless Permanent-Magnet Motor Design", McGraw-Hill, Inc., 1994.
  6. Daekyong Kim, Hak-Gyun Jeong, Han-Seok Park, "Improved back-EMF of 30kW Interior Permanent Magnet Synchronous Generator for Small Hydropower Generation", KIEE Vol. 63, 2012.
  7. Dae-Won Chung, "Cogging Torque Reduction in AFPM Generator Design for Small Wind Turbines", KIEE Vol. 61, 2012.
  8. A feasibility study for wind farms in the Northern region of Chungnam wast coast. pp25. 2013.12 Choi Jung ho. Department of Electrical Engineering Graduate School of Industry Hanbat National University.
  9. Korea Voluntary Emission Reduction, Ministry of Trade, Industry and Energy (MOTIE).
  10. www.kmos.kr
  11. REC.kpx.info