참고문헌
- Amborn, P., Frielingsdorf, H., Ghosh, S., and Greulich, K., "From Metal Cutting to Metal Forming Modern Side-Shafts for Passenger Cars: Manufacturing Aspect," Journal of Materials Processing Technology, Vol. 48, No. 1, pp. 3-12, 1995. https://doi.org/10.1016/0924-0136(94)01627-D
- Lim, S., Lee, N., Na, K., and Lee, C., "Performance Characteristics of the Automotive TDS (Tube Drive Shaft) by the Rotary Swaging Process," Transactions of Materials Processing, Vol. 12, No. 7, pp. 654-661, 2003. https://doi.org/10.5228/KSPP.2003.12.7.654
- Ayrakceken, H., Tasgetiren, S., and Yavuz, I., "Two Case of Failure in the Power Transmission System on Vehicles: A Universal Joint Yoke and a Drive Shaft," Engineering Failure Analysis, Vol. 14, No. 4, pp. 716-724, 2007. https://doi.org/10.1016/j.engfailanal.2006.03.003
- Guk, D. S., Ahn, D. G., Lee, H. J., and Jung, J. H., "Investigation of Structural Safety of a Monobloc Tubular Drive Shaft Subjected to Torque," J. Korean Soc. Precis. Eng., Vol. 32, No. 12, pp. 1073-1080, 2015. https://doi.org/10.7736/KSPE.2015.32.12.1073
- Amborn, U., Ghosh, S., and Leadbetter, I., "Modern Side-Shafts for Passenger Cars: Manufacturing Processes II-Monobloc Tube Shafts," Journal of Materials Processing Technology, Vol. 63, No. 1, pp. 225-232, 1997. https://doi.org/10.1016/S0924-0136(96)02746-X
- Oh, T. W., Yu, T. I., and Hyun, D. H., "A Study on the Rotary Swaging Machine and Process Development of Automotive Tubular Drive Shaft," Proc. of Korean Society of Machine Tool Engineers Autumn Conference, pp. 344-350, 2003.
- Kim, S., Kwon, Y., Lee, Y., and Lee, J., "Design of Mandrel in Tube Drawing Process for Automotive Steering Input Shaft," Journal of Materials Processing Technology, Vols. 187-188, pp. 182-186, 2007. https://doi.org/10.1016/j.jmatprotec.2006.11.134
- Amborn, P., Frielingsdorf, H., Ghosh, S., and Greulich, K., "Modern Side-Shafts for Passenger Cars: Manufacturing Process I," Journal of Materials Processing Technology, Vol. 48, No. 1, pp. 13-24, 1995. https://doi.org/10.1016/0924-0136(94)01628-E
- Kim, W. K., Ko, J. B., and Kim, H. B., "A Study on the Design on the Tubular Drive Shaft," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 7-12, 2009.
- Lim, S.-J., Choi, H.-J., and Lee, C.-H., "Forming Characteristics of Tubular Product through the Rotary Swaging Process," Journal of Materials Processing Technology, Vol. 209, No. 1, pp. 283-288, 2009. https://doi.org/10.1016/j.jmatprotec.2007.08.086
- Schmieder, F. and Kettner, P., "Manufacturing of Hollow Transmission Shafts via Bulk-Metal Forming," Journal of Material Processing Technology, Vol. 71, No. 1, pp. 113-118, 1997. https://doi.org/10.1016/S0924-0136(97)00156-8
- Lim, S., Lee, N., Oh, T., and Lee, C., "Forming Process of the Automotive TDS (Tube Drive Shaft) by the Rotary Swaging Process," Transactions of Materials Processing, Vol. 12, No. 6, pp. 558-565, 2003. https://doi.org/10.5228/KSPP.2003.12.6.558
- Lee, S., Ko, D., Kim, B., Lee, J., Kim, S., et al., "A Study on Monobloc Tube Drawing for Steering Input Shaft," Journal of Materials Processing Technology, Vol. 191, No. 1, pp. 55-58, 2007. https://doi.org/10.1016/j.jmatprotec.2007.03.062
- Semiatin, S. L., "ASM Handbook Volume 14A: Metalworking: Bulk Forming," ASM International, pp. 241-243, 2009.