DOI QR코드

DOI QR Code

연구실 환경에서의 질량농도 측정을 통한 Aluminium oxide의 거동 평가

Behavior Evaluation of Aluminium oxide through Measurement of Mass Concentration under Laboratory Environment

  • 박정화 (호서대학교 대학원 안전공학과) ;
  • 김동현 (호서대학교 대학원 안전환경기술융합학과) ;
  • 김종규 (한국산업안전보건공단 산업안전보건연구원) ;
  • 김형식 (호서대학교 대학원 안전공학과) ;
  • 김정훈 (호서대학교 대학원 안전환경기술융합학과)
  • Park, Jeong-Hwa (Dept. of Safety Engineering, Graduate School of Hoseo University) ;
  • Kim, Dong-Hyun (Dept. of Convergence Technology for Safety and Environment, Graduate School of Hoseo University) ;
  • Kim, Jong-Kyu (Occupational Safety and Health Research Institute, KOSHA) ;
  • Kim, Hyung-Sik (Dept. of Safety Engineering, Graduate School of Hoseo University) ;
  • Kim, Jeong-Hun (Dept. of Convergence Technology for Safety and Environment, Graduate School of Hoseo University)
  • 투고 : 2015.10.28
  • 심사 : 2016.03.20
  • 발행 : 2016.03.28

초록

나노기술이 발전함에 따라 나노물질의 사용량이 증가하고, 그에 따른 환경 및 인체 유해성 문제가 사회적 이슈로 대두되고 있으나 나노물질에 대한 규제나 법규는 아직 제정되어 있지 않다. 이에 본 연구에서는 WPMN에서 지정한 제조나노물질 13종 중 국내에서 가장 많이 사용되고 있는 물질인 aluminium oxide의 거동평가를 실시하여 연구활동종사자들을 위한 안전지침의 기초 자료로 활용하고자 하였다. 실험은 실제 연구실을 1/6의 크기로 축소하여 제작한 chamber에서 진행되며, NIOSH method 0500에 준하여 질량농도를 측정하였다. 연구 결과 질량 농도는 물질의 입자 크기에 반비례하는 것으로 나타났으며, 환기 설비의 작동만으로 질량농도가 약 1/8배까지 감소하는 것을 확인 할 수 있었다. 본 연구를 향후 나노물질 관련 연구활동종사자를 위한 안전지침의 기초자료로 활용할 수 있을 것으로 보이나, 연구의 신뢰도를 높이기 위해 입경에 따른 질량농도, 수농도 측정등의 실험이 필요할 것으로 사료된다.

With the development of nanotechnology, the amount of nanomaterials increases and the problems of environment and the toxic property associated with it have become a social problem. But regulations and laws of nanomaterials have not yet been established. The purpose of this study is to utilize as the database of safety guidelines for research activities' workers associated with nanomaterials to conduct a behavior evaluation of aluminium oxide, which is most widely used in thirteen kinds of WPMN manufactured nanomaterials in the country. The experiment proceeds in the chamber reduced to 1/6 size of the actual laboratory, the test method was performed in NIOSH 0500. As the results of the study, the mass concentration was in inverse proportion to the particle size of the nanomaterials. And the mass concentration during the operation of ventilation equipment was reduced to about 1/8 times. In the future, it can be utilized as the database of safety guidelines for research activities' workers associated with nanomaterials. However, in order to increase the reliability of the study, the experiment of the mass concentration by particle size and Condensation Particle Counters will be needed additionally.

키워드

참고문헌

  1. Sun-ah Kim, Ho-jung Kim, Yong-suk Hong, "Safety Management System on Nanomaterials with a Regulatory Scheme", Korea Environment institute, 12, 3, p.49-71, 2013
  2. Mi-sug Kim, Kyung-hee Choi, Young- hum Kim, Jong-heop Yi, "Risk Assessment for health and environmental hazards of nanomaterials", Clean technology, Vol. 13, No. 3, p.159-170, 2007
  3. Eun-ju Kim, "nanomaterial risk assessment : issues and prospects", p.193-206, J. of Environmental Studies 49, 2010
  4. Seung-hee Maeng, Il-Je Yoo, "The Concept of Nanotoxicology and Risk Assessment of the Nano Particles", Journal of Toxicology and Public Health, vol.21, no.2, p.87-98, 2005
  5. Jung-dae Suh, "Study of the Introduction of a Nanomaterials Regulatory policy for Product Safety", Journal of the Korea Academia-Industrial cooperation Socieaty, Vol.15, No.8, p4987-4998, 2014 https://doi.org/10.5762/KAIS.2014.15.8.4987
  6. Kab-Yong Choi, "A Study on The Development of Process and Equipment for Heat Radiating Module Nano-Tube Manufacturing System", Journal of the Korea Convergence Society, Vol. 2, No. 3, pp. 45-50, 2011.
  7. Eun-mi Jeong, "Promote the industrialization strategy of the Nano Fusion Technology", p.153, Taegwang, 2012
  8. Jong-hui Go, "Local Trends Report: Global nanomaterials regulatory trends", 2011
  9. Tae-hyun Yoon, "Creating long-term road map to ensure the safety of nanomaterials", the National Environmental Research Institute, p.223, 2012
  10. Chang-woo Kim, "Korea nano-technology annual 2013", p.433, National Nanotechnology Policy Center, 2014
  11. Il-je Yu, Kyung-suk Song, "Research of Development of monitoring method and exposure assessment for exposure to hazardous nanomaterials", p.197, Korea Occupational Safety & Health Agency, 2008
  12. Seoul University Industry-Academic Co-operation Foundation, "Environmental fate and ecotoxicological assessment of manufactured nanomaterials", p.566, National Institute of Environmental Research, 2011
  13. Consumer safety center, "Safety and distribution survey of nano-products", p.72, Consumer safety center, 2011
  14. Chung-sik Yun, "Potential health risks and issues of nanoparticles", p.8-21, Biochemistry and Molecular biology News, 2007
  15. National Institute of environmental Research, "Preliminary review of OECD test guidelines for their applicability to manufactured nanomaterials", p.71, 2015
  16. Suk-pil Kim, Sang-ki Jung, Dong-hyun Kim, Da-rae Jung, Eu-ddeum Kwon, Myung-sun Kim, "Perspective and challenges for commercializing nano-technology", p.144, KISTEP, 2014
  17. Chung-sik Yun, Nam-won Back, Il-je Yu, Seung-hun Ham, Ji-hyun Lee, Hye-Jung Jeong, Sun-ju Kim, Ji-hye Moon, Jae-chul Byun, Eun-jin Seo, Gyu-jin Hwang, "Create a measurement protocol of nanomaterials and nanomaterials exposure survey research", Korea industrial health association, 2013
  18. Ji-Young Seo, "Laboratory safety policy measures for the safety of the people, the environment and the facility", STEPI insight, 97th, 2012
  19. Jeong-Hwa Park, "Behavior Evaluation of Nanomaterials under Laboratory Environment based on the Real Condition Analysis of workplaces using WPMN Manufacturing Nanomaterials", 2014
  20. DOI: http://gift.kisti.re.kr/announce/analysis-report/2014/miriran_14038.pdf
  21. DOI: http://madams.kr/newsa/130617.pdf
  22. DOI: http://www.cdc.gov/niosh/docs/2003-154/pdfs/0500.pdf