참고문헌
- NCMS, 1997, Lead-free Solder Project Final Report, NCMS, Ann Arbor, Mich.
- Suhling, J. C., Gale, H. S., Johnson, R. W., Islam, M. N., Shete, T., Lall, P. and Thompson, J. R., 2004, "Thermal Cycling Reliability of Lead Free Solders for Automotive Applications," Proc. 9th Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 350-357.
- Han, C. and Han, B., 2014, "Board Level Reliability Analysis of Chip Resistor Assemblies under Thermal Cycling: A Comparison Study between SnPb and SnAgCu," Journal of Mechanical Science and Technology, Vol. 28, No. 3, pp. 879-886. https://doi.org/10.1007/s12206-013-1154-z
- Steinberg, D. S., 2000, Vibration Analysis for Electronic Equipment, John Wiley & Sons, 3rd Ed.
- Engelmaier, W., 1983, "Fatigue Life of Leadless Chip Carrier Solder Joints during Power Cycling," IEEE Trans. Comp., Hybrids, Manuf. Tech., Vol. 6, No. 3, pp. 232-237. https://doi.org/10.1109/TCHMT.1983.1136183
- Darveaux, R., 2000, "Effect of Simulation Methodology on Solder Joint Crack Growth Correlation," Proc. 50th Electronic Components and Technology Conference, pp. 1048-1058.
- Ng, H. S., Tee, T. Y., Goh, K. Y., Luan, J. E., Reinikainen, T., Hussa, E. and Kujala, A., 2005, "Absolute and Relative Fatigue Life Prediction Methodology for Virtual Qualification and Design Enhancement of Lead-free BGA," Proc. 55th Electronic Components and Technology Conference, pp. 1282-1291.
- Lall, P., 2004, "Model for BGA and CSP Reliability in Automotive Underhood Applications," IEEE Trans. Comp., Hybrids, Manuf. Tech., Vol. 27, No. 3, pp. 585-593.
- Rodgers, B., Punch, J. and Jarvis, J., 2002, "Finite Element Modeling of a BGA Package Subjected to Thermal and Power Cycling," Proc. 18th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 993-1000.
- Anand, L., 1982, "Constitutive Equations for the Rate-dependent Deformation of Metals at Elevated Temperatures," ASME Journal of Engineering Materials and Technology, Vol. 104, No. 1, pp. 12-17. https://doi.org/10.1115/1.3225028
- Rizvi, M. J., Bailey, C. and Lu, H., 2010, "Damage Predictions in a Chip Resistor Solder Joint on Flexible Circuit Board," Microelectronic Engineering, Vol. 87, No. 10, pp. 1889-1895. https://doi.org/10.1016/j.mee.2009.11.023
- Chaillot, A., Grieu, M., Munier, C., Lombaert-Valot, I., Bousquet, S., Chastanet, C. and Maron, D., 2009, "Fatigue Life Prediction Models Developed for Green Electronics in Aeronautical and Military Communication Systems (GEAMCOS)," Proc. 10th. Int. Conf on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 1-8.
- Mysore, K., Subbarayan, G., Gupta, V. and Zhang, R., 2009, "Constitutive and Aging Behavior of Sn3.0Ag0.5Cu Solder Alloy," IEEE Trans. Electronics Packaging Manufacturing, Vol. 32, No. 4, pp. 221-232. https://doi.org/10.1109/TEPM.2009.2024119
- Lau, J. H. and Pao, Y.-H., 1997, Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMT Assemblies, McGraw-Hill, New York, USA.
- Kanda, Y. and Kariya, Y., 2012, "Evaluation of Creep Properties for Sn-Ag-Cu Micro Solder Joint by Multi-temperature Stress Relaxation," Microelectronics Reliability, Vol. 52, No. 7, pp. 1435-1440. https://doi.org/10.1016/j.microrel.2012.02.006
- IEC 60721-3-7, 2002, Classification of Environmental Conditions-Part 3-7: Classification of Groups of Environmental Parameters and Their Severities - Portable and Non-stationary Use, 2nd Ed.