DOI QR코드

DOI QR Code

Finite element modeling of manufacturing irregularities of porous materials

  • Gonzalez, Fernando J. Quevedo (Laboratoire de recherche en Imagerie et Orthopedie (LIO), Departement de Genie de la Production Automatisee, Ecole de Technologie Superieure) ;
  • Nuno, Natalia (Laboratoire de recherche en Imagerie et Orthopedie (LIO), Departement de Genie de la Production Automatisee, Ecole de Technologie Superieure)
  • 투고 : 2015.06.30
  • 심사 : 2015.10.14
  • 발행 : 2016.03.25

초록

Well-ordered porous materials are very promising in orthopedics since they allow tailoring the mechanical properties. Finite element (FE) analysis is commonly used to evaluate the mechanical behavior of well-ordered porous materials. However, FE results generally differ importantly from experimental data. In the present article, three types of manufacturing irregularities were characterized on an additive manufactured porous titanium sample having a simple cubic unit-cell: strut diameter variation, strut inclination and fractured struts. These were included in a beam FE model. Results were compared with experimental data in terms of the apparent elastic modulus (Eap) and apparent yield strength (SY,ap). The combination of manufacturing irregularities that yielded the closest results to experimental data was determined. The idealized FE model resulted in an Eap one order of magnitude larger than experimental data and a SY,ap almost twice the experimental values. The strut inclination and fractured struts showed the strongest effects on Eap and SY,ap, respectively. Combining the three manufacturing irregularities produced the closest results to experimental data. The model also performed well when applied to samples having different structural dimensions. We recommend including the three proposed manufacturing irregularities in the FE models to predict the mechanical behavior of such porous structures.

키워드

과제정보

연구 과제 주관 기관 : Natural Sciences and Engineering Research Council of Canada (NSERC)

참고문헌

  1. Adjari, A., Nayeb-Hashemi, H., Canavan, P. and Warner, G. (2008), "Effect of defects on elastic-plastic behavior of cellular materials", Mater. Sci. Eng., A, 487(1), 558-567. https://doi.org/10.1016/j.msea.2007.10.050
  2. Ahmadi, S.M., Campoli, G., Amin Yavari, S., Sajadi, B., Wauthle, R., Schrooten, J., Weinans, H. and Zadpoor, A.A. (2014), "Mechanical behavior of open-cell porous biomaterials made of diamond lattice unit cells", J. Mech. Behav. Biomed. Mater., 34, 106-115. https://doi.org/10.1016/j.jmbbm.2014.02.003
  3. Alkhader, M. and Vural, M. (2008), "Mechanical response of cellular solids: Role of cellular topology and microstructural irregularity", Int. J. Eng. Sci., 46(10), 1035-1051. https://doi.org/10.1016/j.ijengsci.2008.03.012
  4. Arabnejad, S. and Pasini, D. (2012), "Multiscale design and multiobjective optimization of orthopedic hip implants with functionally graded cellular material", J. Biomech. Eng., 134(3), 031004-1-031004-10. https://doi.org/10.1115/1.4006115
  5. Arabnejad, S. and Pasini, D. (2013), "Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods", Int. J. Mech. Sci., 77, 249-262. https://doi.org/10.1016/j.ijmecsci.2013.10.003
  6. ARCAM AB. Ti6Al4V ELI Titanium Alloy. From http://www.arcam.com/wp-content/uploads/Arcam-Ti6Al4V-ELI-Titanium-Alloy.pdf
  7. Ashby, M.F. (2006), "The properties of foams and lattices", Philos. Trans. R. Soc. Lonodon, Ser. A, 364(1838), 15-30. https://doi.org/10.1098/rsta.2005.1678
  8. Barbas, Q., Bonnet, A.-S., Lipinski, P., Pesci, R. and Dubois, G. (2012), "Development and mechanical characterization of porous titanium bone substitutes", J. Mech. Behav. Biomed. Mater., 9, 34-44. https://doi.org/10.1016/j.jmbbm.2012.01.008
  9. Campoli, G., Borleffs, M.S., Amin Yavari, S., Wauthle, R., Weinans, H. and Zadpoor, A.A. (2013), "Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing", Mater. Des., 49, 957-965. https://doi.org/10.1016/j.matdes.2013.01.071
  10. Chen, C., Lu, T.J. and Fleck, N.A. (1999), "Effect of imperfections on the yielding of two-dimensional foams", J. Mech. Phys. Solid., 47(11), 2235-2272. https://doi.org/10.1016/S0022-5096(99)00030-7
  11. Fraldi, M., Esposito, L., Perrella, G., Cutolo, A. and Cowin, S.C. (2010), "Topological optimization in hip prosthesis design", Biomech. Model. Mechanobiol., 9(4), 389-402. https://doi.org/10.1007/s10237-009-0183-0
  12. Harrigan, J., Reida, S. and Yaghoubib, S. (2010), "The correct analysis of shocks in a cellular material", Int. J. Impact Eng., 37(8), 918-927. https://doi.org/10.1016/j.ijimpeng.2009.03.011
  13. Hazlehurst, K., Wang, C.J. and Stanford, M. (2013), "Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications", Mater. Des., 51, 949-955. https://doi.org/10.1016/j.matdes.2013.05.009
  14. Heo, H., Ju, J. and Kim, D.-M. (2013), "Compliant cellular structures: Application to a passive morphing airfoil", Compos. Struct., 106, 560-569. https://doi.org/10.1016/j.compstruct.2013.07.013
  15. Herrera, A., Yanez, A., Martel, O., Afonso, H. and Monopoli, D. (2014), "Computational study and experimental validation of porous structures fabricated by electron beam melting: A challenge to avoid stress shielding", Mater. Sci. Eng., C, 45, 89-93. https://doi.org/10.1016/j.msec.2014.08.050
  16. Karamooz Ravari, M.R. and Kadkhodaei, M. (2015), "A computationally efficient modeling approach for predicting mechanical behavior of cellular lattice structures", J. Mater. Eng. Perform., 24(1), 245-252. https://doi.org/10.1007/s11665-014-1281-4
  17. Kuiper, J.H. and Huiskes, R. (1997), "Mathematical optimization of elastic properties: application to cementless hip stem design", J. Biomech. Eng., 119(2), 166-174. https://doi.org/10.1115/1.2796076
  18. Kumar, V., Manogharan, G. and Cormier, D.R. (2009), "Design of periodic cellular structures for heat exchanger applications", 20th Solid Freeform Fabrication Symposium, Texas, August, 738-748.
  19. Luxner, M.H., Stampfl, J. and Pettermann, H. (2007), "Numerical simulations of 3D open cell structures-Influence of structural irregularities on elastoplasticity and deformation localization", Int. J. Solids Struct., 44(9), 2990-3003. https://doi.org/10.1016/j.ijsolstr.2006.08.039
  20. Luxner, M.H., Stampfl, J. and Pettermann, H.E. (2005), "Finite element modeling concepts and linear analyses of 3D regular open cell structures", Mech. Behav. Cell. Solid., 40(22), 5859-5866.
  21. Luxner, M.H., Stampfl, J. and Pettermann, H.E. (2009), "Nonlinear simulations on the interaction of disorders and defects in open cell structures", Comput. Mater. Sci., 47(2), 418-428. https://doi.org/10.1016/j.commatsci.2009.09.003
  22. Maloney, K.J., Fink, K.D., Schaedler, T.A., Kolodziejska, J.A., Jacobsen, A.J. and Roper, C.S. (2012), "Multifunctional heat exchangers derived from three-dimensional micro-lattice structures", Int. J. Heat Mass Transfer., 55(9-10), 2486-2493. https://doi.org/10.1016/j.ijheatmasstransfer.2012.01.011
  23. Parthasarathy, J., Starly, B. and Raman, S. (2011), "A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications", J. Manuf. Processes, 13(2), 160-170. https://doi.org/10.1016/j.jmapro.2011.01.004
  24. Petrovic, V., Blasco, J.R., Portoles, L., Morales, I., Primo, V., Atienza, C., Moreno, J.F. and Belloch, V. (2012), A study of mechanical and biological behavior of porous Ti6Al4V fabricated on EBM, Innovative Developments in Virtual and Physical Prototyping, Taylor and Francis, London, United Kingdom, 115-120.
  25. Quevedo Gonzalez, F.J. and Nuno, N. (2015), "Finite element modelling approaches for well-ordered porous metallic materials for orthopaedic applications: cost effectiveness and geometrical considerations", Comput. Meth. Biomech. Biomed. Eng., 1-10.
  26. Smith, M., Guan, Z. and Cantwell, W.J. (2013), "Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique", Int. J. Mech. Sci., 67, 28-41. https://doi.org/10.1016/j.ijmecsci.2012.12.004
  27. Spadoni, A. and Ruzzene, M. (2007), "Static aeroelastic response of chiral-core airfoils", J. Intell. Mater. Syst. Struct., 18, 1067-1075. https://doi.org/10.1177/1045389X06072361
  28. Xiao, D., Yang, Y., Su, X., Wang, D. and Sun, J. (2013), "An integrated approach of topology optimized design and selective laser melting process for titanium implants materials", Bio-Medical Mater. Eng., 23(5), 433-445.
  29. Zhu, H.X., Hobdell, J.R. and Windle, A.H. (2001), "Effects of cell irregularity on the elastic properties of 2D Voronoi honeycombs", J. Mech. Phys. Solids., 49(4), 857-870. https://doi.org/10.1016/S0022-5096(00)00046-6

피인용 문헌

  1. Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review vol.1, pp.2, 2017, https://doi.org/10.3390/jmmp1020013
  2. Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials vol.135, 2017, https://doi.org/10.1016/j.matdes.2017.09.045
  3. Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials vol.121, 2017, https://doi.org/10.1016/j.matdes.2017.02.021
  4. A validated finite element analysis procedure for porous structures vol.189, pp.None, 2020, https://doi.org/10.1016/j.matdes.2020.108546
  5. Computational analysis of the effects of geometric irregularities and post-processing steps on the mechanical behavior of additively manufactured 316L stainless steel stents vol.15, pp.12, 2020, https://doi.org/10.1371/journal.pone.0244463
  6. Investigation of The Effect of Different Prosthesis Designs and Numbers on Stress, Strain and Deformation Distribution vol.12, pp.4, 2016, https://doi.org/10.24107/ijeas.816227
  7. Improving the Accuracy of Analytical Relationships for Mechanical Properties of Permeable Metamaterials vol.11, pp.3, 2016, https://doi.org/10.3390/app11031332
  8. Structure Optimization of a High-Temperature Oxygen-Membrane Module Using Finite Element Analysis vol.14, pp.16, 2021, https://doi.org/10.3390/en14164992