참고문헌
- J. Campbell, Journal de Physique IV, "Invisible macro defects in castings", 03 (1993) C7861-C7872.
- G. Laslaz and P. Laty, AFS Transactions, "Gas porosity and metal cleanliness in aluminum casting alloys", 99 (1991) 83-90.
- M. Divandari, Ph.D. Thesis, The University of Birmingham UK, "Mechanisms of bubble damage in castings" (2001).
- C. Reilly, N.R. Green, and M.R. Jolly, Oxide entrainment structures in horizontal running systems Shape Casting Symposium, San Francisco (2009).
- F. bonollo and S. Odorizzi, Numerical Simulation of Foundry Processes Servizi Grafici Editoriali, Padova (2001).
- L. Liu, A.M. Samuel, and F.H. Samuel, Journal of Material Science, "Influence of oxides on porosity formation in srtreated Al-Si casting alloys", 38 (2003) 1255-1267. https://doi.org/10.1023/A:1022870006721
- Y. Kuriyama, K. Yano and S. Nishido, Fluid Dynamics, Computational Modeling and Applications, "Optimization of pouring velocity for aluminum gravity casting", InTech, Japan (2012) 26.
- M. Masoumi, H. Hu, J. Hedjazi and M. A. Boutorabi, AFS Transactions "Effect of Gating Design on Mold Filling", 05 (2005) 15.
- Fu-Yuan Hsu, Mark R. Jolly and John Campbell, Materials Processing Technology, "A Multiple-gate runner system for gravity casting", 209-17 (2009) 5736-5750.
- J. Campbell, Castings 2nd ed, Butterworth-Heinemann, Oxford (2003).
- J. Campbell, Castings practice the 10 rules of castings Modern Castings, Elsevier Butterworth-Heinemann, Oxford 44 (2004) 39-40.
- J.M. Svoboda, American Foundry Men's Society Cast Metals Institute AFS-CMI, "Basic principles of gating and risering" (1995).
- Ricardo Fuoco, Computational Materials Science, "The Effect of gating system design on the quality of aluminum gravity casting", 36 (2006) 457-467. https://doi.org/10.1016/j.commatsci.2005.05.009
- Ricardo Fuoco, Carlos de Souza Cabezas, Edison Roberto Correa and Marcelo de Andrade Bastos, 1st International Conference on Gating, Filling and Feeding of Aluminum Castings, "Study on Gating System Design for Aluminum Gravity Castings Using Water Models", IPT-Technological Research Institute, Nashville (1999).
- Jin Li and Hwang HY, Master thesis, University of Science and Technology, "A study on image analysis of mold filling process by using water modeling apparatus", (2010).
- P. Sivaraman, International Journal of Research in IT, Management and Engineering, "Experimental studies on flow of molten metal through gating systems using water models", 5 (2015).
- Sarina Bao, Thorvald Abel Engh and Martin Syvertsen, Journal of Materials Science, "Inclusion (particle) removal by interception and gravity in ceramic foam filters", 47 (2012) 7986-7998. https://doi.org/10.1007/s10853-012-6688-4
- Fuwang Chen, Xuebing Huang and Yong Wang, Materials Letters, "Investigation on foam ceramic filter to remove inclusions in revert superalloy", 34 (1998) 372-376. https://doi.org/10.1016/S0167-577X(97)00197-3
- Backman, Backman, Jonas, Ingvar L. Svensson, and Maeda, Yasuhiro, 1st International Conference on Gating, Filling and Feeding of Aluminum Castings, "Evaluation of Filter Parameters from Direct Observations of Metal Flow in Aluminium Castings", American Foundrymen's Society, Nashville (1999).
- Hatef Hashemi and Ramin Raiszadeh, Journal of Applied Sciences, "Naturally-pressurized running systems: the role of ceramic filters", 9 (2009) 2115-2122. https://doi.org/10.3923/jas.2009.2115.2122
- Roger S Kendrick, 1st International Conference on Gating, Filling and Feeding of Aluminum Castings, "The use of foam filters to improve production control in the aluminium automotive foundry", American Foundrymen's Society, Nashville (1999).
- A. Hadi, S. Baghshahi and R. Emadi, Mater. Sci. Eng, "Different pore size alumina foams and study of their physical and mechanical properties", 132 (2009) 340-343.
피인용 문헌
- 흐름 적응 탕구계와 필터가 유동 안정성에 미치는 영향 연구 vol.37, pp.3, 2016, https://doi.org/10.7777/jkfs.2017.37.3.71