DOI QR코드

DOI QR Code

4자유도 고속 병렬 로봇의 해석 및 설계

Analysis and Design of a Novel 4-DOF High-Speed Parallel Robot

  • Kim, Han Sung (Dept. of Mechanical Engineering, Kyungnam University)
  • 투고 : 2016.10.31
  • 심사 : 2016.11.30
  • 발행 : 2016.12.31

초록

Delta parallel robots are now widely used for high-speed applications. However, typical Delta robots, such as ABB Flexpicker suffer from rotating axis with passive prismatic joint subjected to critical speed and so requiring careful maintenance. In this paper, a novel 4-DOF high-speed parallel robot with four legs is presented, which consists of three legs with 90 degree arrangement for translational motions and one remaining leg with rack & pinion gears for rotational motion. The inverse kinematics, velocity, acceleration, statics, and inverse dynamics have been analyzed. From the workspace analysis and inverse dynamics simulation for 0.43 sec cycle time, the 4-axis parallel robot prototype with 12kg payload has been designed. In the future research, computed torque control methods will be developed for the prototype.

키워드

참고문헌

  1. Clavel, R., "Delta, a Fast Robot With Parallel Geometry," 18th International Symposium on Industrial Robots (ISIR), Sydney, Australia, pp. 91-100, 1988.
  2. Miller, K., and Clavel, R., "The Lagrange-Based Model of Delta-4 Robot Dynamics," Robotersysteme, 8(4), pp. 49-54, 1992.
  3. Miller, K., "Experimental Verification of Modeling of Delta Robot Dynamics by Direct Application of Hamilton's Principle," Proceedings of IEEE International Conference on Robotics and Automation (ICRA'95), Nagoya, Japan, pp. 532-537, 1995.
  4. Staicu, S., "Recursive Modeling in Dynamics of Delta Parallel Robot," Robotica, 27(2), pp. 199-207, 2009. https://doi.org/10.1017/S0263574708004451
  5. Stamper, R. E., "A Three Degree of Freedom Parallel Manipulator with Only Translational Degree Freedom," Ph. D. Thesis, University of Maryland, 1997.
  6. Codourey, A., "Dynamic Modeling and Mass Matrix Evaluation of the Delta Parallel Robot for Axes Decoupling Control," Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'96), pp. 1211-1218, 1996.
  7. Available at: http://www.abb.com
  8. Pierrot, F., Nabat, V., Krut, S., and Poignet, P., "Optimal Design of a 4-DOF Parallel Manipulator: From Academia to Industry," IEEE Trans. Rob., 25(2), pp. 213-224, 2009. https://doi.org/10.1109/TRO.2008.2011412