DOI QR코드

DOI QR Code

Fatigue wear of polyamides with surface defects under different loading conditions

  • Abdelbary, Ahmed (Department of Mechanical Engineering, Faculty of Engineering, Alexandria University) ;
  • Nasr, Mohamed N.A. (Department of Mechanical Engineering, Faculty of Engineering, Alexandria University)
  • 투고 : 2016.08.25
  • 심사 : 2016.11.28
  • 발행 : 2016.09.25

초록

Compared to metal-to-metal tribology, polymer tribology presents further complexity as it is more prone to be influenced by operating conditions. Over the past two decades, progress in the field of wear of polymers has led to the establishment of more refined wear mechanisms. The current paper establishes the link between different load parameters and the wear rate of polymers, based on experimental investigations. A pin-on-plate reciprocating tribometer was used to examine the wear behaviour of polyamide sliding against a steel counterface, under constant and fluctuating loads, in dry conditions. In addition, the influence of controlled imperfections in the polymer surface upon its wear rate were examined, under cyclic and steady loading, in order to better understand surface fatigue wear of polymers. The imposed imperfections consisted of vertical artificial deep crack (slit) perpendicular or parallel to the direction of sliding. The study concludes with the followings findings; in general, wear of polymers shows a significant tendency to the type of applied load. Under cyclic loads, polymers show an increase in wear rate compared to those tested under static loads. Such increase was found to increase with the increase in cyclic load frequency. It is also demonstrated that surface cracks results in higher wear rates, particularly under cyclic loads.

키워드

참고문헌

  1. Abdelbary, A. (2014), "Wear of polymers and composites", Woodhead Publishing, Oxford, ISBN 9781782421771, http://dx.doi.org/10.1533/9781782421788.133.
  2. Abdelbary, A., El Fahham, M.I. and Elnady, M.E. (2014), "Load dependent wear characteristics of polymer-metal sliding", Proceeding of the 15th International Conference on Applied Mechanics and Mechanical Engineering AMME-15, Military Technical College, Cairo, May.
  3. Barbour, P.S.M., Barton, D. and Fisher, J. (1995), "The influence of contact stress on the wear of UHMWPE for total replacement hip prostheses", Wear, 181-183, 250-257. https://doi.org/10.1016/0043-1648(94)07032-6
  4. Cooper, J.R., Dowson, D. and Fisher, J. (1993), "Macroscopic and microscopic wear mechanisms in UHMWPE", Wear, 162-164, 378-84. https://doi.org/10.1016/0043-1648(93)90521-M
  5. Daniel MacDonald, Anton, E.B. and Steven, M.K. (2016), 41- MicroCT analysis of wear and damage in UHMWPE, In UHMWPE biomaterials handbook (Third Edition), William Andrew Publishing, Oxford, 786-796, ISBN 9780323354011, http://dx.doi.org/10.1016/B978-0-323-35401-1.00041-7.
  6. Emerson, E.N. and Andreas, A.P. (2015), "The effect of surface roughness on the transfer of polymer films under unlubricated testing conditions", Wear, 326-327, 74-83. https://doi.org/10.1016/j.wear.2014.12.049
  7. Fam, H., Keer, L.M., Chang, W. and Cheng, H.S. (1993), "Competition between fatigue crack propagation and wear", J. Trib., 115(1), 141-145. https://doi.org/10.1115/1.2920967
  8. Gregory, Sawyer, Nicolas, Argibay, David, L. Burris and Brandon, A. Krick (2014), "Mechanistic studies in friction and wear of bulk materials", Ann. Rev. Mat. Res., 44, 395-427. https://doi.org/10.1146/annurev-matsci-070813-113533
  9. Jiaxin, Ye, David, L.B. and Ting, X. (2016), "A review of transfer films and their role in ultra-low-wear sliding of polymers", Lubricants, 4(1), 4. https://doi.org/10.3390/lubricants4010004
  10. Juliana Antonino de Souza, Liliane Canuto Dolavale and Sergio Alvaro de Souza Camargo (2013), "Wear mechanisms of dental composite restorative materials by two different in-vitro methods", Mat. Res., 16(2), 333-340. https://doi.org/10.1590/S1516-14392012005000183
  11. Lamethe, J.F., Sergot, P., Chateauminois, A. and Briscoe, B.J. (2003), "Contact fatigue behaviour of glassy polymers with improved toughness under fretting wear conditions", Wear, 255, 758-765. https://doi.org/10.1016/S0043-1648(03)00169-8
  12. Laurence WMcKeen (2016), Polyamide plastics (Nylons), In Fatigue and Tribological Properties of Plastics and Elastomers (Third Edition), William Andrew Publishing, 199-260, ISBN 9780323442015, http://dx.doi.org/10.1016/B978-0-323-44201-5.00008-3.
  13. Letita, B., David, A. and Pruitt, L.A. (2004), "Wear and surface cracking in early retrieved highly cross-linked polyethylene acetabular liners", J. Bone Joint Surg., 86-A (6), 1271-1282.
  14. Matthias, S., Jeanette, K., Roman, B. and Tobias, H. (2013), "Running-in due to material transfer of lubricated steel/PA46 (aliphatic polyamide) contacts", Wear, 301(1-2), 758-762. https://doi.org/10.1016/j.wear.2012.11.035
  15. Pei, X.Q. and Friedrich, K. (2016), Friction and wear of polymer composites, In Reference Module in Materials Science and Materials Engineering, Elsevier, ISBN 9780128035818, http://dx.doi.org/10.1016/B978-0-12-803581-8.03074-5.
  16. Rochling Engineering Plastics, USA, www.roechling-plastics.us
  17. Sadeghipour, K., Baran, G., Zhang, H. and Wu, W. (2013), "Modeling of fatigue crack propagation during sliding wear of polymers", J. Eng. Mater. Technol., ASME, 125(2), 97-106.
  18. Shi, X., Kida, K. and Kashima, Y. (2014), "Surface crack and wear of PPS polymer thrust bearings under rolling contact fatigue in water", Mat. Res. Innov., 18(5), 42-47. https://doi.org/10.1179/1432891714Z.000000000664
  19. Smata, L., Bouzid, S. and Azari, Z. (2010), "Damage by cyclic loading of composite dental materials", Particle Contin. Aspect. Mesomech., doi:10.1002/9780470610794.ch65.