Journal of the Microelectronics and Packaging Society (마이크로전자및패키징학회지)

The Korean Microelectronics and Packaging Society (한국마이크로전자및패키징학회)
권호 표지
DOI QR코드

DOI QR Code

Double Side SMT and Molding Process Development for mPossum Package

  • Kim, ByongJin (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Cho, EunNaRa (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Kim, ChoongHoe (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Lee, YoungWoo (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Lee, JaeUng (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Ryu, DongSu (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Jung, GyuIck (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Kang, DaeByoung (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Khim, JinYoung (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Yoon, JuHoon (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.) ;
  • Kim, Sun-Joong (Amkor Technology Research & Development Center, Amkor Technology Korea, Inc.)
  • Received : 2016.12.02
  • Accepted : 2016.12.28
  • Published : 2016.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

3-Dimensional System in Package (3-D SiP) structure (Amkor calls it mPossum-molded Possum) using double side Surface Mount Technology (SMT) and double side molding was evaluated in order to achieve small/thin form factor as well as good functionality by integration and double side layout. As the new platform on laminate substrate basis, molding process was challenge in mold flow balance at top and bottom side and package warpage control over the overall assembly process. There were two types of different molding process evaluated with 1) 1-step molding which was done at both side at the same time and 2) 2-step molding which was done at the conventional molding process twice. Mold simulation helped to narrow down the material selections and parameters available before actual sample build. There were many challenges for this first trial in design/ parameter and material types but optimized them to enable this structure.

Keywords

References

  1. S. K. Saha, "Emerging business trends in the semiconductor industry", Proc. Technology Management in the IT-Driven Services (PICMET), 2744, IEEE (2013).
  2. K. Morihiro, "Toward the 3D-SiP Era with New Technologies", Proc. 5th International Microelectronics and Packaging Society Conference (ISMP), 109, Seoul, The Korean Microelectronics and Packaging Society (KMEPS) (2006).
  3. J. Y. Kim and S. J. Lee, "State of The Art in Semiconductor Package for Mobile Devices", The Journal of Korean Institute of Electromagnetic Engineering and Sience, 24(2), 23 (2013).
  4. B. J. Kim, W. B. Bang, G. J. Kim, J. Y. Jung and J. H. Yoon, "Introduction of Routable Molded Lead Frame and its Application", J. Microelectron. Packag. Soc., 22(2), 41 (2015). https://doi.org/10.6117/kmeps.2015.22.2.041
  5. J. S. Kim, Y. S. Ahn, G. W. Han, B. W. Cho, D. J. Park, J. H. Yoon, C. H. Lee, L. Nicholls and S. Wen, "Strip grinding introduction for thin PoP", Proc. 64th Electronic Components and Technology Conference (ECTC), 1361, IEEE (2014).