한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제49권1호
  • /
  • Pages.26-31
  • /
  • 2016
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

천연해수 용액에서 STS 304와 용융 알루미늄 도금된 STS 304의 캐비테이션-침식 환경 하에서의 전기화학적 특성

Electrochemical Characteristics under Cavitation-Erosion Environment of STS 304 and Hot-Dip Aluminized STS 304 in Sea Water Solution

  • 정상옥 (목포해양대학교 기관시스템공학부) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • Chong, Sang-Ok (Division of Marine Engineering, Mokpo Maritime University) ;
  • Kim, Seong-Jong (Division of Marine Engineering, Mokpo Maritime University)
  • 투고 : 2016.02.16
  • 심사 : 2016.02.26
  • 발행 : 2016.02.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the characteristics of a cavitation-erosion damage behavior on the STS 304 and hot-dip aluminized STS 304 under cavitation environment in sea water solution was investigated. The electrochemical experiments were carried out by potential measurement, anodic/cathodic polarization test, Tafel analysis, and also galvanostatic experiment in current density variables for the samples. The apparatus of cavitation-electrochemical experiment was manufactured in compliance with modified ASTM G-32 standard, with the conditions of sea water temperature of $25^{\circ}C$ and the measurement, amplitude of $30{\mu}m$. The damage behavior was analyzed by an observation of surface mophologies and a measurement of damage depth by a scanning electron microscope(SEM) and a 3D microscope, respectively, after electrochemical test. After polarization experiment under cavitation environment, much higher damage depths for the hot-dip aluminized STS 304 were observed comparing to the untreated STS 304. In addition, higher corrosion current density in hot-dip aluminized STS 304 presented than that of untreated STS 304 as a result of Tafel analysis.

키워드

참고문헌

  1. W. J. Cheng, C. J. Wang, Effect of Chromium on the Formation of Intermetallic Phases in Hot-Dipped Aluminide Cr-Mo Steels, Appl. Surf. Sci., 277 (2013) 139-145. https://doi.org/10.1016/j.apsusc.2013.04.015
  2. D. Hwangbo, S. J. Choi, H. K. Lim, Y. S. Kim, Corrosion Properties for Hot-Dip Aluminized Steel and 304 Stainless Steel, Corro. & Protec., 9 (2010) 61-66.
  3. H. H. Liu, W. J. Cheng, C. J. Wang, The Mechanism of Oxide Whisker Growth and Hot Corrosion of Hot-Dipped Al-Si Coated 430 Stainless Steels in Air-NaCl(g) Atmosphere, Appl. Surf. Sci., 257 (2011) 10645-10652. https://doi.org/10.1016/j.apsusc.2011.07.066
  4. J. Y. Song, J. C. Park, Y. S. Ahn, High Temperature Salt Corrosion Property of Ferritic Stainless Steels, J. Kor. Soc. Mar. Eng., 33 (2009) 860-866. https://doi.org/10.5916/jkosme.2009.33.6.860
  5. E. Frutos, P. Adeva, J. L. Gonzalez-Carrasco, P. Perez, Oxidation Behavior of AISI 316 Steel Coated by Hot Dipping in an Al-Si Alloy, Surf. & Coat. Tech., 236 (2013) 188-199. https://doi.org/10.1016/j.surfcoat.2013.09.046
  6. S. O. Chong, I. C. Park, M. S. Han, S. J. Kim, Evaluation of Electrochemical Corrosion Characteristics for Hot-Dip Aluminized 304 Stainless Steel in Seawater, J. Kor. Inst. Surf. Eng., 48 (2015) 354-359. https://doi.org/10.5695/JKISE.2015.48.6.354
  7. Annual Book of ASTM Standards G32-92, ASTM International, PA, (1992) 113.
  8. U. R. Kattner, T. B. Massalski, Binary Alloy Phase Diagrams, ASM International, Material Park, Ohio, (1990) 147.
  9. W. Cheng, C. Wang, Growth of Iintermetallic Layer in the Aluminide Mild Steel during Hot-Dipping, Surf. & Coat. Tech., 204 (2009) 824-828. https://doi.org/10.1016/j.surfcoat.2009.09.061
  10. S. Kobayashi, T. Yakou, Control of Intermetallic Compound Layers at Interface Between Steel and Aluminum by Diffusion-Treatment, Mater. Sci. Eng., A338 (2002) 44-53.
  11. M. V. Akdeniz, A. O. Mekhrabov, T. Yilmaz, The Role of Si Addition on the Interfacial Interaction in Fe-Al Diffusion Layer, Scripta Metallurgica et materilia, 31 (1994) 1723-1728. https://doi.org/10.1016/0956-716X(94)90471-5
  12. M. G. Fontana, Corrosion Engineering, 3rd Ed. McGraw-Hill Book Company, New York (1986).
  13. D. A. Jones, Principles and Prevention of Corrosion, Prentice Hall, (2011) 80.
  14. G. Bregliozzi, A. D. Schino, S. I. U. Ahmed, J. M. Kenny, H. Haefke, Cavitation Wear Behaviour of Austenitic Stainless Steels with Different Grain Sizes, Wear, 258 (2005) 503-510. https://doi.org/10.1016/j.wear.2004.03.024
  15. S. J. Kim, K. Y. Hyun, Investigation on Surface Hardening and Corrosion Characteristics by Water Cavitation Peening with Time for Al 5052-O Alloy, Corro. Sci. & Tech., 11 (2012) 151-156. https://doi.org/10.14773/cst.2012.11.4.151
  16. S. J. Kim, S. J. Lee, S. O. Chong, Electrochemical Characteristics under Cavitation-Erosion for STS 316L in Seawater, Mater. Res. Bulletin, 58 (2014) 244-247. https://doi.org/10.1016/j.materresbull.2014.03.029
  17. S. K. Jang, S. O. Chong, M. S. Han, S. J. Kim, Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment, J. Kor. Inst. Surf. Eng., 45 (2012) 278-283. https://doi.org/10.5695/JKISE.2012.45.6.278