참고문헌
- C. Casarosa and A. Franco, "On the Optimum Thermal Design of Individual Longitudinal Fins with Rectangular Profiles," Heat Transfer Engineering, Vol.22, No.1, pp.51-71, 2001. https://doi.org/10.1080/01457630117894
- S. Abrate and P. Newnham, "Finite Element Analysis of Triangular Fins Attached to a Thick Wall," Computers & Structures, Vol.57, No.6, pp.945-957, 1995. https://doi.org/10.1016/0045-7949(95)00105-P
- H. S. Kang and D. C. Look Jr., "Two Dimensional Trapezoidal Fins Analysis," Computational Mechanics, Vol.19, No.3, pp.247-250, 1997. https://doi.org/10.1007/s004660050173
- L. T. Yu and C. K. Chen, "Optimization of Circular Fins with Variable Thermal Parameters," Journal of the Franklin Institute, Vol.336, No.1, pp.77-95, 1999. https://doi.org/10.1016/S0016-0032(97)00021-5
- H. S. Kang, "Optimization of a Pin Fin with Variable Base Thickness," ASME J. of Heat Transfer, Vol.132, No.3, pp.034501-1-034501-4, 2010. https://doi.org/10.1115/1.4000048
- P. E. Rodi and D. S. Dolling, "Behavior of Pressure and Heat Transfer in Sharp Fin-induced Turbulent Interaction," AIAA Journal, Vol.33, No.11, pp.2013-2019, 1995. https://doi.org/10.2514/3.12852
- R. K. Shah, "Temperature Effectiveness of Multiple Sandwich Rectangular Plate-Fin Surfaces," ASME J. of Heat Transfer, Vol.93, No.4, pp.471- 473, 1971. https://doi.org/10.1115/1.3449852
- H. S. Kang, "Optimum Design of a Geometrically Asymmetric Trapezoidal Fin Based on the Fixed Fin Base Height," Transactions of KSAE, Vol.16, No.6, pp.81-87, 2008.
- A. Aziz and A. D. Kraus, "Optimum Design of Radiating and Convecting-radiating Fins," Heat Transfer Engineering, Vol.17, No.3, pp.44-78, 1996. https://doi.org/10.1080/01457639608939880
- D. B. Mackay and C. P. Bacha, ASD Technical Report, 1961.
- H. S. Kang, "Optimization of Geometrically Asymmetric Straight Trapezoidal Fins," Journal of Mechanical Science and Technology, Vol.28, No.12, pp.5205-5212, 2014. https://doi.org/10.1007/s12206-014-1144-9
- R. J. Moitsheki, M. M. Rashidi, A. Basiriparsa and A. Mortezaei, "Analytical Solution and Numerical Simulation for One-dimensional Steady Nonlinear Heat Conduction in a Longitudinal Radial Fin with Various Profiles," Heat Transfer- Asian Research Vol.44, No.1, pp.20-38, 2015. https://doi.org/10.1002/htj.21104
- C. H. Huang and Y. L. Chung, "An Inverse Problem in Determining the Optimum Shapes for Partially Wet Annular Fins Based on Efficiency Maximization," Int. J. of Heat and Mass Transfer, Vol.90, pp.364-375, 2015. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.070
- K. T. Kim and H. S. Kang, "A Heat Loss Comparison between the Two Parabolic Fin Models Using Two Different Numerical Methods," Journal of KSIAM, Vol.2, No.2, pp.97-109, 1998.
- H. S. Kang and D. C. Look, Jr., "Optimization of a Trapezoidal Profile Annular Fin," Heat Transfer Engineering, Vol.30, No.5, pp.359- 367, 2009. https://doi.org/10.1080/01457630802414599
- K. M. Kwak and H. Y. Lee, "Characteristics of Fin-side Heat-transfer and Pressure Drop in a Condenser for Automobile," Transactions of KSAE, Vol.12, No.3, pp.152-158, 2004.
- M. S. Park, S. C. Kim, D. W. Kim and M. S. Kim, "Studies on the Steady State and Dynamic Characteristics of a Carbon Dioxide Air-conditioning System for Vehicles," Transactions of KSME, Vol.31, No.6, pp.531-538, 2007.