한국융합학회논문지 (Journal of the Korea Convergence Society)

  • 제7권6호
  • /
  • Pages.23-28
  • /
  • 2016
  • /
  • 2233-4890(pISSN)
  • /
  • 2713-6353(eISSN)
한국융합학회 (Korea Convergence Society)
권호 표지
DOI QR코드

DOI QR Code

전원모듈의 전자파 적합성(EMC) 특성 분석

An investigation Study of Electromagnetic Compatibility for Power Module

  • Chae, Gyoo-Soo (Division of Information Communication Eng., Baekseok University)
  • 투고 : 2016.11.02
  • 심사 : 2016.12.20
  • 발행 : 2016.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서 전력 변환 회로의 전자파적합성(EMC: Electromagnetic Compatibility)에 관한 설계 및 측정 결과를 제시하고 있다. 태양광 에너지 저장 장치에 주로 사용되는 LT3652 칩을 사용한 DC-DC 전력 변환 회로가 설계되어 제작되었다. 제작된 회로를 이용하여 원거리 방사, 근거리 전도성 및 복사성 방출에 대한 시뮬레이션이 ANSYS SIwave로 수행되었으며 결과가 제시되었다. 본 연구에서 불필요한 방사를 최소화하기 위해 콘덴서와 접지 포스트가 추가된 회로를 사용하였다. 전도 및 방사 방출은 CISPR 22의 표준화 된 시험 절차에 따라 EMC 전용무반사실에서 측정되었다. 개선된 회로를 사용하여 측정된 데이터를 제시하였고 개선 전후의 값들이 비교되었다. 제시된 결과를 보면 EMI 감소 기술이 적용된 회로에서 원치 않는 방출이 크게 감소하는 것을 보여주고 있다. 여기서 제안 된 결과는 전력 컨버터 모듈의 설계에 효율적으로 적용 가능한 기술이다.

In this study, an investigation study on EMC(Electromagnetic Compatibility) is presented for power converter circuit. A DC-DC power converter circuit using LT3652 chip is designed and fabricated. The simulation results using ANSYS SIwave for far field radiation and unwanted emissions are presented. To minimize the unwanted emissions, we design a optimized circuit by using capacitors and ground posts. The conducted and radiation emissions are measured in the EMC test chamber based on standardized testing procedures of CISPR 22. The measured EMI emission values for a power converter circuit are presented and compared with the original circuit. The results show that the unwanted emissions from the circuit are tremendously diminished due to the applied EMI reduction techniques. The results proposed here can be usefully applied on designing power converter modules.

키워드

참고문헌

  1. Paul, C. Introduction to Electromagnetic Compatibility, John Wiley & Sons, 1992.
  2. L. Premalatha, T. A. Raghavendiran, C. Ravichandran, "Experimental Study on Conducted EMI Mitigation in SMPS using a Novel Spread Spectrum Technique," Journal of Power Electronics, Vol. 13, Issue 4, pp. 619-625, 2013. https://doi.org/10.6113/JPE.2013.13.4.619
  3. J. Jia, D. Rinas, and S. Frei, "Prediction of radiated fields from cable bundles based on current distribution measurements," International Symposium on Electromagnetic Compatibility (EMC EUROPE 2012), pp. 1-7, September 2012.
  4. S. Igarashi, S. Takizawa, K. Kuroki, T. Shimizu, "Analysis and reduction of radiated EMI noise from converter systems," Electrical Engineering in Japan. Vol. 130, Issue 1, pp. 106-117, 2000. https://doi.org/10.1002/(SICI)1520-6416(200001)130:1<106::AID-EEJ13>3.0.CO;2-3
  5. G. Braglia, A. Duffy and S. Barmada, "Simulation Validation of Experimental Tests for Automotive System EMC Developmental Tests," Applied Computational Electromagnetics Society Journal, Vol. 31, Issue 9, pp. 1028-1034, 2016.
  6. Benson Wei, Steven G. Pytel Jr., "New Integrated Workflow for EMI Simulation," Asia-Pacific Symposium on Electromagnetic Compatibility(APEMC), Taipei, 26-29 May 2015. DOI: 10.1109/APEMC.2015.7175276 APEMC 2015.
  7. M. R. Barzegaran, A. Nejadpak, O. A. Mohammed, "Physics-Based Modeling of Power Converter Drive System for Evaluation of Electromagnetic Compatibility," Applied Computational Electromagnetics Society Journal. Vol. 30, Issue 6, pp. 660-669, 2015.
  8. D. Rinas, J. Jia, A. Zeichner, and S. Frei, "Substituting EMC emission measurement by field and cable scan method using measured transfer function," Advances in Radio Science, vol. 11, pp. 183-188, July 2013. https://doi.org/10.5194/ars-11-183-2013
  9. A. Nejadpak and O. A. Mohammed, "Physics based modeling of power converters from finite element electromagnetic field computations," IEEE Transactions on Magnetics, vol. 49, no. 1, pp. 567-576, 2013. https://doi.org/10.1109/TMAG.2012.2206046
  10. N. Mutoh, J. Nakashima, and M. Kanesaki, "Multilayer power printed structures suitable for controlling EMI noises generated in power converters," IEEE Transactions on Industrial Electronics, vol. 50, no. 6, pp. 1085-1094, 2003. https://doi.org/10.1109/TIE.2003.819674
  11. M. Olofsson, "Low frequency EMC and power quality," In Compliance Mag., pp. 34-41, Apr. 2012.
  12. S. Braun, A. Frech, P. Russer, "Measurement of electromagnetic interference in time-domain, Advances in Radio Science, Vol. 6, pp. 311-313, 2008. https://doi.org/10.5194/ars-6-311-2008
  13. Tasuku Takagi, "Research and development on EMC/EMI measurements and technologies in Japan," Electronics & Communications in Japan, Part 1: Communications, Vol. 82, Issue 11, pp. 83-92, 1999. https://doi.org/10.1002/(SICI)1520-6424(199911)82:11<83::AID-ECJA9>3.0.CO;2-N
  14. International Electrotechnical Commission, CISPR 22 (C)IEC: 2005(E)
  15. Power Tracking 2A Battery Charger for Solar Power, LT3652 data sheet, Linear Technology, 2010.