References
- ACI, 229R (2005), Controlled low strength materials, American Concrete Institute, Farmington Hills, MI, USA.
- ASTM C400 (2013), Standard test methods for quicklime and hydrated lime for neutralization of waste acid, West conshohocken, PA.
- ASTM D422 (2007), Standard test method for particle size analysis of soils, West conshohocken, PA.
- ASTM C618 (2012), Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, West conshohocken, PA.
- ASTM C1231 (2015), Standard practice for use of unbonded caps in determination of compressive strength of hardened concrete cylinders, West conshohocken, PA.
- ASTM D854 (2014), Standard test methods for specific gravity of soil solids by water pycnometer, West conshohocken, PA.
- ASTM D2488 (2009), Standard practice for description and identification of soils (visual-manual procedure), West conshohocken, PA.
- ASTM D6103 (2004), Standard test method for flow consistency of controlled low strength material (CLSM), West conshohocken, PA.
- Brewer, W. E. and Hurd, J. O. (1993), Controlled low atrength material - Controlled density fill (CLSM-CDF) as a backfill around flexible Structures, Structural performance of Pipes, pp. 25-34.
-
Chindaprasirt, P., De Silva, P., Sagoe-Crentsil, K. and Hanjitsuwan, S. (2012), Effect of
$SiO_2$ and$Al_2O_3$ on the setting and hardening of high calcium fly ash-based geopolymer systems, J. of Materials Science, Vol. 47, No. 12, pp. 4876-4883. https://doi.org/10.1007/s10853-012-6353-y - Choi, S. K., Lee, S., Song, Y. K. and Moon, H. S. (2002), Leaching characteristics of selected Korean fly ashes and its implications for the groundwater composition near the ash disposal mound, Fuel, Vol. 81, No. 8, pp. 1083-1090. https://doi.org/10.1016/S0016-2361(02)00006-6
- Davidovits, J. (1989), Geopolymers and geopolymeric materials, J. of Thermal Analysis, Vol. 35, 1989, pp. 429-441. https://doi.org/10.1007/BF01904446
- Du, L., Folliard, K. J. and Trejo, D. (2002), Effects of constituent materials and quantities on water demand and compressive strength of controlled low-strength material, J. of materials in Civil Engineering, Vol. 14, No. 6, pp. 485-495. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:6(485)
- Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M. and Van Deventer, J. S. (2005), Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 269, No. 1, pp. 47-58. https://doi.org/10.1016/j.colsurfa.2005.06.060
- Fredlund, M. D., Fredlund, D. G. and Wilson, G. W. (2000), An equation to represent grain-size distribution, Canadian Geotechnical J, Vol. 37, No. 4, pp. 817-827. https://doi.org/10.1139/t00-015
- Gabr, M. A. and Bowders, J. J. (2000), Controlled low-strength material using fly ash and AMD sludge, J. of Hazardous Materials, Vol. 76, No. 2, pp. 251-263. https://doi.org/10.1016/S0304-3894(00)00202-8
- Hwang, J. P., Shim, H. B., Lim, S. Y. and Ann, K. Y. (2013), Enhancing the durability properties of concrete containing recycled aggregate by the use of pozzolanic materials, KSCE J. of Civil Engineering, Vol. 17, No. 1, pp. 155-163. https://doi.org/10.1007/s12205-013-1245-5
- Hu, J. and Wang, K. (2005), Effects of aggregate on flow properties of mortar, In Proceeding of the Mid-Continent Transportation Research Symposium, p. 8.
- Hsu, H. M., Cheng, A., Chao, S. J., Huang, R., Cheng, T. C. and Lin, K. L. (2009), Controlled low strength materials containing bottom ash from circulating fludized bed combustion, International J. of Pavement Research and Technology, Vol. 2, No. 6, pp. 250-256.
-
Irassar, E. F. (2005), Thaumasite formation in limestone filler cements exposed to sodium sulphate solution at
$20^{\circ}C$ , Cement and Concrete Composites, Vol. 27, No. 1, pp. 77-84. https://doi.org/10.1016/j.cemconcomp.2003.10.003 - Kim, H. K., Jeon, J. H. and Lee, H. K. (2012), Flow, water absorption, and mechanical characteristics of normal-and high-strength mortar incorporating fine bottom ash aggregates, Construction and Building Materials, Vol. 26, No. 1, pp. 249-256. https://doi.org/10.1016/j.conbuildmat.2011.06.019
- Kumar, A. and Kumar, S. (2013), Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization, Construction and Building Materials, Vol. 38, pp. 865-871. https://doi.org/10.1016/j.conbuildmat.2012.09.013
- Lee, J. M., Kim, D. W. and Kim, J. S. (2011), Characteristics of co-combustion of anthracite with bituminous coal in a 200-MWe circulating fluidized bed boiler, Energy, Vol. 36, pp. 5703-5709. https://doi.org/10.1016/j.energy.2011.06.051
- Lee, N. K., Kim, H. K., Park, I. S. and Lee, H. K. (2013), Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products, Construction and Building Materials, Vol. 49, pp. 738-746. https://doi.org/10.1016/j.conbuildmat.2013.09.002
- Li, H., Xiao, H. G., Yuan, J. and Ou, J. (2004), Microstructure of cement mortar with nano-particles, Composites Part B: Engineering, Vol. 35, No 2, pp. 185-189. https://doi.org/10.1016/S1359-8368(03)00052-0
- Misra, A., Biswas, D. and Upadhyaya, S. (2005), Physicomechanical behavior of self-cementing class C fly ash-clay mixtures, Fuel, Vol. 84, No. 11, pp. 1410-1422. https://doi.org/10.1016/j.fuel.2004.10.018
- Puppala, A. J., Chittoori, B. and Raavi, A. (2014), Flowability and density characteristics of controlled low-strength material using native high-plasticity clay, J. of Materials in Civil Engineering, Vol. 27, No. 1, 06014026, pp. 1-6.
- Rattanasak, U. and Chindaprasirt, P. (2009), Influence of NaOH solution on the synthesis of fly ash geopolymer, Minerals Engineering, Vol. 22, No. 12, pp. 1073-1078. https://doi.org/10.1016/j.mineng.2009.03.022
- Thomas, M. D. A. (2007), Optimizing the use of fly ash in concrete, Skokie, IL, USA: Portland Cement Association, Skokie, IL, USA.
- Turner, J. P. (1997), Evaluation of western coal fly ashes for stabilization of low-volume roads, in testing soil mixed with waste or recycled materials, ASTM International, West conshohocken, PA, pp. 157-172.
- Xu, H. and Van Deventer, J. S. (2003), Effect of source materials on geopolymerization, Industrial & Engineering Chemistry Research, Vol. 42, No. 8, pp. 1698-1706. https://doi.org/10.1021/ie0206958
- Yoon, S. W. and Rho, J. S. (2004), Preparation and application of CSA expansive additives using industrial wastes, J. of the Korea Concrete Institute, Vol. 16, No. 3, pp. 369-374. https://doi.org/10.4334/JKCI.2004.16.3.369