DOI QR코드

DOI QR Code

효율적인 열 방출을 하기 위한 방열판의 형상 설계에 관한 연구

A Study on the Shape Design of a Radiator Panel for Effective Heat Release

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2016.04.30
  • 심사 : 2016.08.01
  • 발행 : 2016.10.31

초록

This study investigates the heat transfer due to a change in the shape of a radiator panel inside a computer. As with models of radiator panels, models have the same surface areas. As the gap between heat transfer surfaces in model 1 becomes wider than those in model 2, the heat transfer at model 1 becomes smoother than that of model 2. By comparing the cooling processes between models 1 and 2 with respect to natural convection, a maximum temperature of $47.432^{\circ}C$ at model 1 becomes lower than that of model 2, at $49.821^{\circ}C$. Within the radiator panel, model 1 has been shown to be more effective than model 2. Accordingly, these results can be effectively applied to the shape design of radiator panels to imbue them with smoother and faster heat transfer through the finite element method.

키워드

참고문헌

  1. Lee, S. H., Moon, H. J., Hue, S. B., Choi, S. D., "Development of LED Module Control-based PWM Current for Control of Heat-dissipation," J. of Korean Soc. of Manuf. Process Eng., Vol. 14, No. 6, pp. 129-135, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.129
  2. Jung, J. H., Kim, S. C., Kim, H. C., Jung, D. H., Song, S. H., Lee, S. Y., Song, H. G., "A Study on Thermal-Flow Characteristics Analysis of Canned Type Electric Water Pump," KSAE conference, 2010.
  3. Sohn, I. S., Lee, J. G., "A Study of Electrical Control Kit for Damping Force of Automotive Shock Absorber " Transactions of KSAE, Vol. 16, No. 3, pp. 1-6, 2008.
  4. Cho, J. U., Han, M. S., "Analysis of Fatigue Damage at Wheel under Variable Load," J. of KSMTE, Vol. 19, No. 6, pp. 753-759, 2010.
  5. Swanson, J., ANSYS 12.0, ANSYS Inc., U.S.A., 2010.
  6. Lee, J. J., Kim, H. K., Hyun, B. S., "The Correlation of Satellite Thermal Mathematical Model using Results of Thermal Vacuum Test on Structure-Thermal Model," J. of Korean Society of Aeronautical and Space Sciences, Vol. 37, No. 9, pp. 917, 2009.
  7. Kim, Y. S., Cho, J. K., Kim, M. J., Cho, K. M. and Hyun, C. T., "A Productivity Analysis of Tower Crane Installation Progress Based on Simulation Technique," J. of Korea Institute of Building Construction, Vol. 10, No. 2, pp. 33-40, 2010. https://doi.org/10.5345/JKIC.2010.10.2.033
  8. Jang, H., Suh, J. S., Yi, C. S., "A Study on the radiant Heat Characteristic According to Type and Array of LED Lighting Heatsink," J. of Korean Soc. of Manuf. Process Eng., Vol. 12, No. 3, pp. 54-60, 2013.
  9. Cho, Y. T., "Heat Sink of LED Lights Using Engineering Plastics," J. of Korean Soc. of Manuf. Process Eng., Vol. 12, No. 4, pp. 61-68, 2013.
  10. Hwang, J. D., Ko, D. S., "Development of a High Efficient LED System for the Plant Growth ," J. of Korean Soc. of Manuf. Process Eng., Vol. 13, No. 4, pp. 121-129, 2014.
  11. Kim, S. T., Lee, S. J., Choi, Y. H., "Thermal Characteristics Analysis of a High Speed Spindle System by Using FSI Method," J. of Korean Soc. of Manuf. Process Eng., Vol. 13, No. 3, pp. 83-88, 2014.
  12. Cho, Y. T., Lee, C. H., "Performance Evaluation of Heat Radiant for 50W LED by the CNT Thermal Interface Material," J. of Korean Soc. of Manuf. Process Eng., Vol. 13, No. 6, pp. 23-29, 2014.
  13. Kim, H. J., "Experimental Study on Thermal Analysis of Steering Control ECU Structure for Electric Vehicles," J. of Korean Soc. of Manuf. Process Eng., Vol. 14, No. 5, pp. 113-119, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.113

피인용 문헌

  1. 자동차 LED 전조등 방열판 형상에 따른 융합 연구 vol.8, pp.3, 2016, https://doi.org/10.15207/jkcs.2017.8.3.199
  2. 자동차 LED 전조등 방열판 형상에 따른 융합 연구 vol.8, pp.3, 2016, https://doi.org/10.15207/jkcs.2017.8.3.199
  3. 헤어드라이기의 팬 형상에 따른 열변형에 관한 연구 vol.16, pp.3, 2016, https://doi.org/10.14775/ksmpe.2017.16.3.082
  4. 20kW급 폐열회수 시스템 공정 설계에 관한 연구 vol.17, pp.4, 2016, https://doi.org/10.14775/ksmpe.2018.17.4.091
  5. 250kW급 폐열회수 시스템용 유기랭킨사이클 배관 열유동해석에 관한 연구 vol.18, pp.4, 2016, https://doi.org/10.14775/ksmpe.2019.18.4.026
  6. 250kW급 폐열회수 시스템 공정설계에 관한 연구 vol.18, pp.5, 2016, https://doi.org/10.14775/ksmpe.2019.18.5.090