References
- S. Czernik and A. V. Bridgwater, Overview of applications of biomass fast pyrolysis oil, Energy Fuels, 18, 590-598 (2004). https://doi.org/10.1021/ef034067u
- L. Qiang, L. Wen-Zhi, and Z. Xi-Feng, Overview of fuel properties of biomass fast pyrolysis oils, Energy Convers. Manag., 50, 1376-1383 (2009). https://doi.org/10.1016/j.enconman.2009.01.001
- A. V. Bridgwater, Review of fast pyrolysis of biomass and product upgrading, Biomass Bioenergy, 38, 68-94 (2012). https://doi.org/10.1016/j.biombioe.2011.01.048
- B. M. Wagenaar, W. Prins, and W. P. M. Van Swaaij, Pyrolysis of biomass in the rotating cone reactor: modelling and experimental justification, Chem. Eng. Sci., 49, 5109-5126 (1994). https://doi.org/10.1016/0009-2509(94)00392-0
- L. Ingram, D. Mohan, M. Bricka, P. Steele, D. Strobel, D. Crocker, et al., Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils, Energy Fuels, 22, 614-625 (2008). https://doi.org/10.1021/ef700335k
- A. R. Fernandez-Akarregi, J. Makibar, G. Lopez, M. Amutio, and M. Olazar, Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis, Fuel Process. Technol., 112, 48-56 (2013). https://doi.org/10.1016/j.fuproc.2013.02.022
- Y. S. Choi, S. K. Choi, and Y. W. Jeong, Development of a tilted- slide reactor for the fast pyrolysis of biomass, Environ. Prog. Sustain. Energy, 33, 1405-1410 (2014).
- M. J. Wornat, B. G. Porter, and N. Y. C. Yang, Single droplet combustion of biomass pyrolysis oils, Energy Fuels, 8, 1131-1142 (1994). https://doi.org/10.1021/ef00047a018
- C. R. Shaddix and D. R. Hardesty, Combustion Properties of Biomass Flash Pyrolysis Oils, SAND99-8238, Sandia National Laboratories (1999).
- J. D'Alessio, M. Lazzaro, P. Massoli, and V. Moccia, Thermo-optical investigation of burning biomass pyrolysis oil droplets, in: Twenty-seventh Symposium (International) on Combustion, pp. 1915-1922 (1998).
- D. Chiaramonti, A. Oasmaa, and Y. Solantausta, Power generation using fast pyrolysis liquids from biomass, Renew. Sustain. Energy Rev., 11, 1056-1086 (2007). https://doi.org/10.1016/j.rser.2005.07.008
- A. Oasmaa, M. Kyto, and K. Sipila, Pyrolysis oil combustion tests in an industrial boiler, In: A.V. Bridgwater (Ed.), Progress in Thermochemical Biomass Conversion, 1468-1481, Blackwell Science, Oxford, U.K. (2001).
- G. Lopez Juste and J. J. Salva Monfort, Preliminary test on combustion of wood derived fast pyrolysis oils in a gas turbine combustor, Biomass Bioenergy, 19, 119-128 (2000). https://doi.org/10.1016/S0961-9534(00)00023-4
- R. Strenziok, U. Hansen, and H. Kunstner, Combustion of bio-oil in a gas turbine, In: A.V. Bridgwater (Ed.), Progress in Thermochemical Biomass Conversion, 1452-1458, Blackwell Science, Oxford, U.K. (2001).
- Y. Solantausta, N. O. Nylund, and S. Gust, Use of pyrolysis oil in a test diesel engine to study the feasibility of a diesel power plant concept, Biomass Bioenergy, 7, 297-306 (1994). https://doi.org/10.1016/0961-9534(94)00072-2
- A. Shihadeh and S. Hochgreb, Diesel engine combustion of biomass pyrolysis oils, Energy Fuels, 14, 260-274 (2000). https://doi.org/10.1021/ef990044x
- V. Stamatov, D. Honnery, and J. Soria, Combustion properties of slow pyrolysis biooil produced from indigenous Australian species, Renew. Energy, 31, 2108-2121 (2006). https://doi.org/10.1016/j.renene.2005.10.004
- D. Nguyen and D. Honnery, Combustion of bio-oil ethanol blends at elevated pressure, Fuel, 87, 232-243 (2008). https://doi.org/10.1016/j.fuel.2007.04.023
- J. L. Zheng and Y. P. Kong, Spray combustion properties of fast pyrolysis bio-oil produced from rice husk, Energy Convers. Manag., 51, 182-188 (2010). https://doi.org/10.1016/j.enconman.2009.09.010
- T. Tzanetakis, N. Farra, S. Moloodi, W. Lamont, A. McGrath, and M. J. Thomson, Spray combustion characteristics and gaseous emissions of a wood derived fast pyrolysis liquid-ethanol blend in a pilot stabilized swirl burner, Energy Fuels, 24, 5331-5348 (2010). https://doi.org/10.1021/ef100670z
- J. A. Martin and A. A. Boateng, Combustion performance of pyrolysis oil/ethanol blends in a residential-scale oil-fired boiler, Fuel, 133, 34-44 (2014). https://doi.org/10.1016/j.fuel.2014.05.005
- S. K. Choi, Y. S. Choi, S. J. Kim, and Y. W. Jeong, Characteristics of flame stability and gaseous emission of biocrude-oil/ethanol blends in a pilot-scale spray burner, Renew. Energy, 91, 516-523 (2016). https://doi.org/10.1016/j.renene.2016.01.066
- P. M. Gavin, PROGRAM DROP: A Computer Program for Prediction of Evaporation from Freely Falling Multicomponent Drops, SAND96-2878, Sandia National Laboratories (1996).
- W. E. Ranz and W. R. Marshall, Jr., Evaporation from Drops - Part I, Chem. Eng. Prog., 48, 141-146 (1952).
- W. E. Ranz and W. R. Marshall, Jr., Evaporation from Drops - Part II, Chem. Eng. Prog., 48, 173-180 (1952).
- C. K. Law, Combustion Physics, 214-217, Cambridge University Press, NY, USA (2006).
Cited by
- Catalytic Pyrolysis of Polyethylene and Polypropylene over Desilicated Beta and Al-MSU-F vol.8, pp.11, 2018, https://doi.org/10.3390/catal8110501