DOI QR코드

DOI QR Code

Thermal Characteristics of 600 W Brushless DC Motor under Axial Loading Condition

회전축 부하를 고려한 BLDC 모터의 열적 특성에 관한 실험 및 수치 해석적 연구

  • Kwon, Hwabhin (Department of Mechanical Engineering, Changwon National University) ;
  • Lee, Won-Sik (Department of Electrical Engineering, Changwon National University) ;
  • Kim, Gyu-Tak (Department of Electrical and Electricity Control Engineering, Changwon National University) ;
  • Park, Heesung (Department of Mechanical Engineering, Changwon National University)
  • 권화빈 (창원대학교 기계공학과 대학원) ;
  • 이원식 (창원대학교 전기공학과 대학원) ;
  • 김규탁 (창원대학교 전기전자제어공학부) ;
  • 박희성 (창원대학교 기계공학부)
  • Received : 2016.10.17
  • Accepted : 2016.11.14
  • Published : 2016.12.01

Abstract

A brushless direct current (BLDC) motor electronically performs rectification without brushes. It therefore does not have the typical mechanical friction contacts between the brushes and commutators. The BLDC motor has the advantages of high speed, low noise, and electronic noise reduction in addition to high durability and reliability. Therefore, it is mainly used in electric vehicles and electric equipment. However, iron loss and copper loss due to long-term use induce temperature increases in the motor, which reduces its performance and life. The temperatures of the stator and permanent magnet are predicted to be $62.3^{\circ}C$ and $32.2^{\circ}C$, respectively. This study shows the enhanced temperature distribution in a 600 W BLDC motor using unsteady and three-dimensional (3D) numerical investigations validated with experimental data.

Keywords

References

  1. Kang, S.-J., Wang, S.-M., Shim, H.-K., and Lee, K.-S., "Thermal and Flow Analysis of Outer-Rotor Type BLDC Motor with Cooling Blades," Transactions of the Korean Society of Mechanical Engineers B, Vol. 31, No. 9, pp. 772-779, 2007. https://doi.org/10.3795/KSME-B.2007.31.9.772
  2. Kim, M. S. and Lee, K. S. "Effects of Design Parameters on the Thermal Performance of a Brushless DC Motor," Transactions of the Korean Society of Mechanical Engineers B, Vol. 32, No, 2, pp. 141-148, 2008. https://doi.org/10.3795/KSME-B.2008.32.2.141
  3. Ye, J. W., Son, M. G., Choe, M. H., Kim, D. H., Cho, Y. S., et al., "Study on Temperature and Vibration of BLDC Motor," The Korea Society for Power System Engineering, Vol. 18, No. 4, pp. 43-51, 2014.
  4. Andreas, J., "Energy-Efficient Electric Motors: Selection and Applications," Marcel Dekker Inc, pp. 1982.
  5. Cassat, A., Espanet, C., and Wavre, N., "BLDC Motor Stator and Rotor Iron Losses and Thermal Behavior Based on Lumped Schemes and 3-D FEM Analysis," IEEE Transactions on Industry Applications, Vol. 39, No. 5, pp. 1314-1322, 2003. https://doi.org/10.1109/TIA.2003.816480
  6. Fussell, B., "Thermal Effects on the Torque-Speed Performance of a Brushless DC Motor," Proc. of the Electrical Electronics Insulation Conference and Electrical Manufacturing, Coil Winding Conference, pp. 403-411, 1993.
  7. Liu, Z., Howe, D., Mellor, P., and Jenkins, M., "Coupled Thermal and Electromagnetic Analysis of a Permanent Magnet Brushless DC Servo Motor," Proc. of the International Conference on Electrical Machines and Drives, pp. 631-635, 1993.
  8. Kim, H. Y., Kim, Y. B., and Shin, P. S., "A Thermal Analysis of 10MW-BLDC Motor by FE Program," The Korean Institute of Electrical Engineers, pp. 52-54, 2011.
  9. Lee, I., Ye, J., Lee, D., Hwang, P., and Shim, J., "Development of Heat Dissipation Measuring System for 1.2-Kw BLDC Motor," Transactions of the Korean Society of Mechanical Engineers A, Vol. 37, No. 11, pp. 1423-1428, 2013. https://doi.org/10.3795/KSME-A.2013.37.11.1423
  10. Kim, M.-S., Lee, K.-S., and Um, S., "Numerical Investigation and Optimization of the Thermal Performance of a Brushless DC Motor," International Journal of Heat and Mass Transfer, Vol. 52, No. 5, pp. 1589-1599, 2009. https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.040
  11. Moon, S. and Lee, J.-H., "Thermal Reliability Analysis of BLDC Motor in a High Speed Axial Fan by Numerical Method," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 22, No. 3, pp. 130-138, 2010.
  12. Fu, Y.-X., He, Z.-X., Mo, D.-C., and Lu, S.-S., "Thermal Conductivity Enhancement with Different Fillers for Epoxy Resin Adhesives," Applied Thermal Engineering, Vol. 66, No. 1, pp. 493-498, 2014. https://doi.org/10.1016/j.applthermaleng.2014.02.044