References
- Bruneau, M., Uang, C.M., Whittaker, A. (1997) Ductile Design of Steel Structures, McGraw-Hill, USA.
- Burns, S.A. (2002) Recent Advancements in Opmtimal Structural Design, ASCE.
- Choi, S.W., Yang, H.J., Park, H.S. (2010) Development of Optimal Seismic Design Model for Inverted V-type Special Concentrically Braced Frames, J. Comput. Struct. Eng. Inst. Korea, 23, pp.111-120.
- Deb, K., Pratap, A., Agarwal, S., Meyarivan, T. (2002) A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II, IEEE Trans. Evolut. Comput., 6(2), pp.182-197. https://doi.org/10.1109/4235.996017
- FEMA 356 (2000) Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC.
- Fragiadakis, M., Lagaros, N.D., Papadrakakis, M. (2006a) Performance Based Multiobjective Optimum Design of Steel Structures Considering Life Cycle Cost, Struct. & Multidiscip. Optim., 32, pp.1-11. https://doi.org/10.1007/s00158-006-0009-y
- Fragiadakis, M., Lagaros, N.D., Papadrakakis, M. (2006b) Performance Based Earthquake Engineering using Structural Optimisation Tools, Int. J. Reliab. & Saf., 1, pp.59-76. https://doi.org/10.1504/IJRS.2006.010690
- Fragiadakis, M., Papadrakakis, M. (2008) Performance Based Optimum Seismic Design of Reinforced Concrete Structures, Earthq. Eng. & Struct. Dyn., 37, pp.825-844. https://doi.org/10.1002/eqe.786
- Ghobarah, A. (2001) Performance Based Design in Earthquake Engineering: State of Development, Eng. Struct., 23, pp.878-884. https://doi.org/10.1016/S0141-0296(01)00036-0
- Gupta, A., Krawinkler, H. (1999) Seismic Demands for Performance Evaluation of Steel Moment Resisting Rrame Structures, The John A. Blume Earthquake Engineering Center, Report No. 132, Dept. of Civil Engineering, Stanford University, Stanford, California.
- Khatib, I.F., Mahin, S.A., Pister, K.S. (1988) Seismic Behavior of Concentrically Braced Steel Frames, EERC Report, UCB/EERC-88/01, Berkeley.
- Liu, M., Burns, S.A., Wen, Y.K. (2005) Multiobjective Optimization for Performance Based Seismic Design of Steel Moment Frame Structures, Earthq. Eng. & Struct. Dyn., 34, pp.289-306. https://doi.org/10.1002/eqe.426
- Moghaddam, H., Hajirasouliha, I., Doostan, A. (2005) Optimum Seismic Design of Concentrically Braced Steel Frames: Concepts and Design Procedures, J. Construct. Steel Res., 61, pp.151-166. https://doi.org/10.1016/j.jcsr.2004.08.002
- OpenSees http://opensees.berkeley.edu/index.php
- Park, H.S., Choi, S.W. (2016) Genetic Algorithm Based Optimal Seismic Design Method for Inducing the Beam-Hinge Mechanism of Steel Moment Frames, J. Comput. Struct. Eng. Inst. Korea, 29, pp.253-260. https://doi.org/10.7734/COSEIK.2016.29.3.253
- Priestley, M.J.N. (2000) Performance Based Seismic Design, 12WCEE, San Diego.
- Sabelli, R. (2000) Research on Improving the Design and Analysis of Earthquake Resistant Steel Braced Frames, FEMA/EERI.
- Uriz, P. (2005) Towards Earthquake Resistant Design of Concentrically Braced Steel Frames, Ph.D. Dissertation, Civil and Environmental Engineering, University of California, Berkeley.
- Yang, C.S, Leon, R.T., DesRoches, R. (2008a) Design and Behavior of Zipper Braced Frames, Eng. Struct., 30, pp.1092-1100. https://doi.org/10.1016/j.engstruct.2007.06.010
- Yang, C.S, Leon, R.T., DesRoches, R. (2008b) Pushover Response of a Braced Frame with Suspended Zipper Struts, J. Struct. Eng., 134(10), pp.1619-1626. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:10(1619)
- Zou, X.K., Chan, C.M., Li, G., Wang, Q. (2007) Multiobjective Optimization for Performance Based Design of Reinforced Concrete Frames, J. Struct. Eng., 133(10), pp.1462-1474. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1462)