참고문헌
- H. I. Dawood, K. S. Mohammed, M. Y. Rajab "Advantages of the green solid state FSW over the conventional GMAW process", Advances in Materials Science and Engineering, vol. 2014, pp. 1-10, 2014. DOI: http://dx.doi.org/10.1155/2014/105713
- R. M. Leal, C. Leitao, A. Loureiro, D. M. Rodrigues, P. Vilaca "Material flow in heterogeneous friction stir welding of thin aluminium sheets: effect of shoulder geometry", Materials Science and Engineering: A, vol. 498, no. 1, pp. 384-391, 2008. DOI: http://dx.doi.org/10.1016/j.msea.2008.08.018
- K. Elangovan, V. Balasubramanian "Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy", Materials & design, vol. 29, no. 2, pp. 362-373, 2008. DOI: http://dx.doi.org/10.1016/j.matdes.2007.01.030
- R. S. Mishra, M. W. Mahoney, T. J. Lienert, K. V. Jata "Friction stir welding and processing", pp. 7-35, ASM international, 2007.
- G. Padmanaban, V. Balasubramanian "Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy-an experimental approach", Materials & Design, vol. 30, no. 7, pp. 2647-2656, 2009. DOI: http://dx.doi.org/10.1016/j.matdes.2008.10.021
- Y. G. Kim, H. Fujii, T. Tsumura, T. Komazaki, K. Nakata "Three defect types in friction stir welding of aluminum die casting alloy", Materials Science and Engineering: A, vol. 415, no. 1, pp. 250-254, 2006. DOI: http://dx.doi.org/10.1016/j.msea.2005.09.072
- Z. W. Chen, T. Pasang, Y. Qi "Shear flow and formation of nugget zone during friction stir welding of aluminium alloy 5083-O", Materials Science and Engineering: A, vol. 474, no. 1, pp. 312-316, 2008. DOI: http://dx.doi.org/10.1016/j.msea.2007.05.074
- H. Schmidt, J. Hattel, J. Wert "An analytical model for the heat generation in friction stir welding", Modelling and Simulation in Materials Science and Engineering, vol. 12, no. 1, pp. 143-157, 2003. DOI: http://dx.doi.org/10.1088/0965-0393/12/1/013
- P. Heurtier, M. J. Jones, C. Desrayaud, J. H. Driver, F. Montheillet, D. Allehaux "Mechanical and thermal modelling of friction stir welding", Journal of Materials Processing Technology, vol. 171, no. 3, pp. 348-357, 2006. DOI: http://dx.doi.org/10.1016/j.jmatprotec.2005.07.014
- Y. G. Kim, H. Fujii, T. Tsumura, T. Komazaki, K. Nakata "Effect of welding parameters on microstructure in the stir zone of FSW joints of aluminum die casting alloy", Materials Letters, vol. 60, no. 29, pp. 3830-3837, 2006. DOI: http://dx.doi.org/10.1016/j.matlet.2006.03.123
- F. Pan, A. Xu, D. Deng, J. Ye, X. Jiang, A. Tang, Y. Ran "Effects of friction stir welding on microstructure and mechanical properties of magnesium alloy Mg-5Al-3Sn", Materials & Design, vol. 110, pp. 266-274, 2016. DOI: http://dx.doi.org/10.1016/j.matdes.2016.07.146
- C. Aneja, A. Handa "Effect of tool shape and welding parameters on mechanical properties and microstructure of dissimilar friction stir welded aluminum alloys", Materialove Inzinierstvo, vol. 23, no. 2, pp. 58-67, 2016.
- S. H. C. Park, Y. S. Sato, H. Kokawa "Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test", Scripta Materialia, vol. 49, no. 2, pp. 161-166, 2003. DOI: http://dx.doi.org/10.1016/S1359-6462(03)00210-0
- E. O. Hall "The deformation and ageing of mild steel: III discussion of results", Proceedings of the Physical Society. Section B, vol. 64, no. 9, pp. 747, 1951. DOI: http://dx.doi.org/10.1088/0370-1301/64/9/303
- N. J. Petch "The cleavage strength of polycrystals", The Journal of the Iron and Steel Institute, vol. 174, pp. 25-28, 1953.
- Y. S. Sato, M. Urata, H. Kokawa, K. Ikeda "Hall-Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys", Materials Science and Engineering: A, vol. 354, no. 1, pp. 298-305, 2003. DOI: http://dx.doi.org/10.1016/S0921-5093(03)00008-X
- K. P. Mehta, V. J. Badheka "Influence of tool design and process parameters on dissimilar friction stir welding of copper to AA6061-T651 joints", The International Journal of Advanced Manufacturing Technology, vol. 80, no. 9-12, pp. 2073-2082, 2015. DOI: http://dx.doi.org/10.1007/s00170-015-7176-1
- K. P. Mehta, V. J. Badheka "Effects of tool pin design on formation of defects in dissimilar friction stir welding", Procedia Technology, vol. 23, pp. 513-518, 2016. DOI: http://dx.doi.org/10.1016/j.protcy.2016.03.057
- S. Lim, S. Kim, C. G. Lee, C. D. Yim, S. J. Kim "Tensile behavior of friction-stir-welded AZ31-H24 Mg alloy", Metallurgical and Materials Transactions A, vol. 36, no. 6, pp. 1609-1612, 2005. DOI: http://dx.doi.org/10.1007/s11661-005-0252-7
- L. Commin, M. Dumont, J. E. Masse, L. Barrallier "Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters", Acta materialia, vol. 57, no. 2, pp. 326-334, 2009. DOI: http://dx.doi.org/10.1016/j.actamat.2008.09.011
- W. Woo, H. Choo, D. W. Brown, P. K. Liaw, Z. Feng "Texture variation and its influence on the tensile behavior of a friction-stir processed magnesium alloy", Scripta materialia, vol. 54, no. 11, pp. 1859-1864, 2006. DOI: http://dx.doi.org/10.1016/j.scriptamat.2006.02.019
- L. Ying, L. E. Murr, J. C. McClure "Solid-state flow visualization in the friction-stir welding of 2024 Al to 6061 Al", Scripta materialia, vol. 40, no. 9, pp. 1041-1046, 1999. DOI: http://dx.doi.org/10.1016/S1359-6462(99)00062-7
-
M. A. Gharacheh, A. H. Kokabi, G. H. Daneshi, B. Shalchi, R. Sarrafi "The influence of the ratio of "rotational speed/traverse speed"(
${\omega}/v$ ) on mechanical properties of AZ31 friction stir welds", International Journal of Machine Tools and Manufacture, vol. 46, no. 15, pp. 1983-1987, 2006. DOI: http://dx.doi.org/10.1016/j.ijmachtools.2006.01.007 - R. Sarkar, T. K. Pal, M. Shome "Material flow and intermixing during friction stir spot welding of steel", Journal of Materials Processing Technology, vol. 227, pp. 96-109, 2016. DOI: http://dx.doi.org/10.1016/j.jmatprotec.2015.08.006