DOI QR코드

DOI QR Code

Development of Analysis Model of Pressure·Flow-controlled Swash Plate Type Pump for Evaluating Feasibility of Design

설계 타당성 검토를 위한 압력·유량 제어형 사판식 피스톤 펌프의 해석모델 개발

  • Received : 2016.08.31
  • Accepted : 2016.11.28
  • Published : 2016.12.31

Abstract

This study aims to verify the feasibility of design by developing pressure flow-controlled swash plate type pump with the use of SimulationX, a computer analysis program. Developing analysis model based on design drawing data has a cost-saving effect because it is possible to figure out the effectiveness of design through the work and it never falls into repeated inaccuracies in the production process. Analysis model is developed in the following order. First, the structure of each part such as valve and rotating unit which have dynamic factor is analyzed and the modeling of single component is carried out, reflecting drawing data. Second, the modeling of pump assembly is carried out with the combination of each analysis model and a work is conducted to determine whether the modeling can perform pressure flow control function according to load condition smoothly based on design intent. At the end of the modeling process, the feasibility of design is verified by showing the parts which are moving as expected mechanism.

본 연구는 컴퓨터 해석프로그램 SimulationX로 압력 유량 제어형 사판식 피스톤 펌프의 해석모델을 개발하여 설계의 타당성을 검증하는 것을 다룬다. 설계도면의 제원을 바탕으로 해석모델을 개발하게 되면 프로토타입 제작 이전에 설계의 유효성을 미리 판단할 수 있고 이로 인해 제작상의 반복적 오류를 범하지 않기 때문에 개발비 절감의 효과를 가져올 수 있다. 해석모델 개발의 진행순서는 다음과 같다. 먼저 동역학적 요소가 포함된 밸브, 회전부 등의 각 부품의 구조를 분석하고 도면의 제원을 반영하여 단품 모델링을 한다. 각각의 해석모델을 조합하여 펌프 어셈블리 모델링을 하고 이것이 설계의도에 맞게 부하조건에 따른 압력 유량제어 기능을 원활히 수행할 수 있는지 파악한다. 모델링 절차의 마지막에는 예상했던 메카니즘대로 부품들이 움직이는 모습을 보여줌으로서 설계의 타당성을 검증한다.

Keywords

References

  1. Esposito A. (2009), FLUID POWER with Application. 7th Edition, Scitech, Goyang-si, Gyeonggi-do, pp. 164-165.
  2. D.S. Hyun , Y.B. Lee and H.E. Kim, "Analysis and Design of Axial Type Hydraulic Piston Pump Motor", Journal of Taejon National University of Technology, Vol.17, No.1, pp. 1-15, 2000.
  3. S. Kim, J.H. Song, J.Y. Jung, D.H. Lee, "A Study on the Lubrication Characteristics of a Compensator System for Swash Plate Type Axial Piston Pump", Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference, Vol.20, No.6, pp. 54-58, 1994.
  4. J.S. Jang (2011a), "Development of Analysis Model for Characteristic Study of Fluid Power System in Injection Molding Machine", Journal of KSFC, Vol. 8, No. 4, pp. 1-8.
  5. J.S. Jang (2011b), "Characteristics Analysis of the Fluid Power System for a Double-color Infection Molding Machine Development", Journal of KSFC. Vol. 8, No. 4, pp. 24-31.
  6. J.M. Jin, Development of an analysis model Swash plate angle-the load-flow of swash plate-type hydraulic piston pump, M. S. Thesis, Gyeongsang National University, pp. 1-37, 2015.
  7. I.Y. LEE. (2012), Hydraulic Engineering.1th Edition, Munundang, Jongno, Seoul, pp. 12-13
  8. D.K. Noh. and J.S. Jang (2013), "Shape Design Sensitivity Analysis Case of the Valves installed in the Hydraulic Driving Motor", Journal of KSS. Vol. 22, No. 3, pp. 81-87.
  9. D.K. Noh., Y.K. Kang., J. D. ji., J.S. Park. and J.S. Jang (2015), "Case of Developing Analysis Model for Recoil System for Automatic Gun", Journal of KSS. Vol. 24, No. 4, pp. 35-41.
  10. Y.S. Hong. and Y.C. Kwon., (2013), "Hybrid control of the swash plate-type variable displacement hydraulic piston pump for an EHA", Journal of KSAS. Vol. 41, No. 4, pp. 291-298.
  11. I.S. Cho. (2013a), "Characteristics of Lubrication between Slipper and Swashplate in Swashplate Type Hydraulic Piston Pump", Journal of KSTLE. Vol. 29, No. 3, pp. 186-191.
  12. I.S. Cho. and J.Y. Jung. (2013b), "The Lubrication Characteristics According to the Rotating Radius of Piston in a Swash-Plate Type Piston Pump", Journal of KSPE. Vol. 30, No. 7, pp. 749-753. https://doi.org/10.7736/KSPE.2013.30.7.749
  13. Y.H. Yoon., J.S. Jang. and Y.B. Lee. (2012), "An Analysis of Dynamic Characteristics for Variable Swash Plate Type Axial Piston Pump", 2012 KSFC spring conference book. pp. 23-30.