References
- Park, S. H., Lee, Y. D. and Ahn, K. Y., 2014, "Performance Analysis of an SOFC/HCCI Engine Hybrid System: System Simulation and Thermoeconomic Comparison," International Journal of Hydrogen Energy, Vol. 39, pp. 1799-1810. https://doi.org/10.1016/j.ijhydene.2013.10.171
- Veyo, S., 2002, "Tubular Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycle Power Systems," Journal of Mechanical Design, Vol. 124, No. 4, pp. 845-849.
- Zanfir, M. and Gavriilidis, A., 2003, "Catalytic Combustion Assisted Methane Steam Reforming in a Catalytic Plate Reactor," Chemical Engineering Science, Vol. 58, pp. 1967-3960.
- Lee, J. S., Lee, K. H., Yu, S. S., Ahn, K. Y. and Kang, S. G., 2012, "Numerical Analysis of Steam-methane Reforming Reaction for Hydrogen Generation using Catalytic Combustion," Transctions of the Korean Hydrogen and New Energy Society, Vol. 24, No. 2, pp. 113-120.
- Park, J. G., Lee, S. K., Lim, S. K. and Bae, J. M., 2009, "Numerical Study on Operation Parameters and Shapes of a Steam Reformer for Hydrogen Production from Methane," Trans. Korean Soc. Mech. Eng. B, Vol. 33, No. 1, pp. 60-67. https://doi.org/10.3795/KSME-B.2009.33.1.60
- Xu, J. and Froment, G. F., 1989, "Methane Steam Reforming, Methanation and Water-gas Shift. I: Intrinsic Kinetics," A.I.Ch.E. Journal, Vol. 35, pp. 88-96. https://doi.org/10.1002/aic.690350109
- Xu, J. and Froment, G. F., 1989, "Methane Steam Reforming, Methanation and Water-gas Shift. II: Diffusional Limitations and Reactor Simulation," A.I.Ch.E. Journal, Vol. 35, pp. 97-103. https://doi.org/10.1002/aic.690350110
- Levent M., Budak G. and Karabulut, A., 1998, "Estimation of Concentration and Temperature Profiles for Methane-steam Reforming Reaction in a Porous Catalyst," Fuel Process Technol Vol. 55, pp. 251-263. https://doi.org/10.1016/S0378-3820(98)00054-X
- Hsueh, C. Y., Chu, H. S., Yan, W. M., Leu, G. C. and Tsai, J. L., 2011, "Three Dimensional Analysis of a Plate Methanol Steam Micro Reformer and a Methanol Catalytic Combustor with Different Flow Channel Designs," International journal of hydrogen energy Vol. 36, pp. 13575-13586. https://doi.org/10.1016/j.ijhydene.2011.07.099
- Yin, F. X., Ji, S. F., Chen, B. H., Zhao, L. P., Liu, H. and Li, C. Y., 2006, "Preparation and Characterization of LaFe1 -xMgxO3/Al2O3/FeCrAl: Catalytic Properties in Methane Combustion," Applied Catalysis B: Enviromental, Vol. 66, pp. 265-273. https://doi.org/10.1016/j.apcatb.2006.03.017
- Kim, J., Choi, B. and Yi, J., 1999, "Modified Simulation of Methane Steam Reforming in Pd-membrane Packed Bed Type Reactor," Journal of Chem Eng Japan, Vol. 32, pp. 760-769. https://doi.org/10.1252/jcej.32.760
- White, F. M., 1974, Viscous Fluid Flow, McGraw-Hill, New York, pp. 163-189.
- Baek, S. M., Kang, J. H., Lee, K. J. and Nam, J. H., 2014, "A Numerical Study of the Effectiveness Factors of Nickel Catalyst Pellets used in Steam Methane Reforming for Residential Fuel Cell Applications," International Journal of Hydrogen Energy, Vol. 39, pp. 9180-9192. https://doi.org/10.1016/j.ijhydene.2014.04.067
-
Kaihu, H. and Ronald, H., 2001, "The Kinetics of Methane Steam Reforming over a
$Ni/{\alpha}-Al_2O$ Catalyst," Chemical Engineering Journal, Vol. 82, pp. 311-328. https://doi.org/10.1016/S1385-8947(00)00367-3