DOI QR코드

DOI QR Code

에틸렌 반응로에 대한 복합 열전달 해석

Conjugate Heat Transfer Analysis of an Ethylene Furnace

  • 안준 (국민대학교 기계시스템공학부) ;
  • 박진우 (국민대학교 대학원 기계공학과)
  • Ahn, Joon (School of Mechanical Systems Engineering, Kookmin University) ;
  • Park, Jin Woo (Department of Mechanical Engineering, Graduate School of Kookmin University)
  • 투고 : 2015.07.21
  • 심사 : 2015.08.24
  • 발행 : 2015.10.10

초록

Conjugate heat transfer analysis for an ethylene furnace was carried out based on numerical simulation. Detailed distributions of velocity vectors, chemical species, and temperature inside the furnace are presented and discussed. Von Mises stress and heat flux at the tube surface were also evaluated to elucidate mechanisms regarding failure of the tube. Maximum stress was found at the upstream elbow of the tube, which did not coincide with the location of maximum heat flux. This implies that thermal stress at a steady state would not be a dominant component of the stress. Degradation of the material, as well as the system arrangement, should be considered in order to accurately predict the lifetime of the tube material in the furnace.

키워드

참고문헌

  1. Kim, T. G., Kim, J. H., Kim, Y. D., and Kim, K. I., 2002, Current risk management status of the Korean petrochemical industry, J. Loss Prevention, Vol. 15, pp. 311-318. https://doi.org/10.1016/S0950-4230(02)00014-1
  2. Jeong, S. Y., Yoon, K. B., Duyet P. V., Yu, J. M., and Kim, J. Y., 2013, Structural integrity evaluation by system stress analysis for fuel piping in a process plant, J. Korean Society of Safety, Vol. 28, No. 3, pp. 44-50. https://doi.org/10.14346/JKOSOS.2013.28.3.044
  3. Jeong, G. S. and Baik, E. S., 2014, A study on the improvement of safety management of hazardous chemicals handling in the workplace, J. Korean Institute of Fire Sci. Eng., Vol. 28, No. 1, pp. 12-19.
  4. Kim, K. R., Hwang, S. Y., and Kim B. H., 2012, A study on the safety management of the petrochemical complex area, J. Korean Institute of Fire Sci. Eng., Vol. 26, No. 1, pp. 38-42.
  5. Huang, R. H., Yang, C. L., and Kao, C. S., 2012, Assessment model for equipment risk management : petrochemical industry cases, Safety Sci., Vol. 50, pp. 1056-1066. https://doi.org/10.1016/j.ssci.2010.02.024
  6. Fire Insurance Association of Korea, 1999, Fire case report, J. Korean Institute of Fire Sci. Eng., Vol. 13, No. 2, pp. 33-36.
  7. Guan, K., Xu, H. and Wang, Z., 2005, Analysis of failed ethylene cracking tubes, Eng. Failure Analysis, Vol. 12, pp. 420-431. https://doi.org/10.1016/j.engfailanal.2004.03.012
  8. Khodamorad, S. H., Fatmehsari, D. H., Rezaie, H. and Sadeghipour, A., 2012, Analysis of etylene cracking furnace tubes, Eng. Failure Analysis, Vol. 21, pp. 1-8. https://doi.org/10.1016/j.engfailanal.2011.11.018
  9. Lan, X., Gao, J., Xu, C., and Zhang, H., 2007, Numerical simulation of transfer and reaction process in ethylene furnaces, Trans. IChemE, Part A, Vol. 85, pp. 1565-1579. https://doi.org/10.1016/S0263-8762(07)73201-X
  10. Howell, J. R., Menguc, M. P. and Siegel, R., 2010, Thermal Radiation Heat Transfer, 5th Ed., Taylor and Francis, pp. 640-654.
  11. Smith, T. F., Shen, Z. F., and Friedman, J. N., 1982, Evaluation of coefficients for the weighted sum of gray gases model, ASME J. Heat Transfer, Vol. 104, No. 4, pp. 602-608. https://doi.org/10.1115/1.3245174

피인용 문헌

  1. Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2015 vol.28, pp.6, 2016, https://doi.org/10.6110/KJACR.2016.28.6.256