References
- Bayrakceken, H., Tasgetiren, S., and Yavuz, I., "Two Case of Failure in the Power Transmission System on Vehicles: A Universal Joint Yoke and a Drive Shaft," Engineering Failure Analysis, Vol. 14, No. 4, pp. 716-724, 2007. https://doi.org/10.1016/j.engfailanal.2006.03.003
- Lim, S. J., Lee, N. K., Na, K. H., and Lee, C. H., "Performance Characteristics of the Automotive TDS (Tube Drive Shaft) by the Rotary Swaging Process," Transactions of Materials Processing, Vol. 12, No. 7, pp. 645-661, 2003.
- Lim, S. J., Lee, N. K., and Lee, C. H., "Vibration Mode and Durability Characteristics of Automotive TDS Using Rotary Swaging Process for Incremental Forming," Transactions of Materials Processing, Vol. 13, No. 5, pp. 127-133, 2005.
- Amborn, P., Frielingsdorf, H., Ghosh, S. K., and Greulich, K., "Modern Side-Shafts for Passenger Cars: Manufacturing Processes I," Journal of Material Processing Technology, Vol. 48, No. 1-3, pp. 13-24, 1995. https://doi.org/10.1016/0924-0136(94)01628-E
- Schmieder, F. and Kettner, P., "Manufacturing of Hollow Transmission Shafts via Bulk-Metal Forming," Journal of Material Processing Technology, Vol. 71, No. 1, pp. 113-118, 1997. https://doi.org/10.1016/S0924-0136(97)00156-8
- Kim, W. K., Ko, J. B., and Kim, H. B., "A Study on the Design on the Tubular Drive Shaft," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 7-12, 2009.
- Seol, S. S., Jung, J. H., and Lee, C. H., "A Study on the Optimized Drawing Process Design of a Seamless High-Strength Tubular Drive Shaft for Automobiles," Proc. of KSPE Autumn Conference, p. 361, 2004.
- Rautaruukki Corporation, "Hot Rolled Hardenable Boron Steels," http://www.ruukki.com/Steel/Hotrolled-steels/Wear-resistant-steels/Hardenable-boronsteel (Accessed 9 November, 2015)
- Ju, W. S., Han, G. Y., Min, B. H., Shim, J. G., Lee, G. H., et al., "Mechanical Design," Samsung Books, pp. 617-717, 2008.
- eFatigue, "Fatigue Analysis on the Web," https://www.efatigue.com/ (Accessed 9 November, 2015)
- Bannantine, J. A., Comer, J. J., and Handrock, J. L., "Fundamentals of Metal Fatigue Analysis," Prentice Hall, pp. 1-87, 1990.
- Zhu, Y., "Fatigue Strength," http://www.mae.ncsu.edu/zhu/courses/mae316/lecture/9-Fatigue_Shig.pdf (Accessed 9 November, 2015)
- Diesburg, D. E. and Eldis, G. T., "Fracture Resistance of Various Carburized Steels," Metallurgical Transactions A, Vol. 9, No. 11, pp. 1561-1570, 1978. https://doi.org/10.1007/BF02661938
- Kim, D. W. and Lim, B. S., "Plasma and Vacuum Carburizing Processes and Mechanical Properties of SCM 415 Steel," Journal of Mechanical Science and Technology, Vol. 13, No. 8, pp. 634-641, 1999.
- Gao, Y., Yao, M., Yang, Q., Zhao, Y., Lu, F., et al., "Influence of Carburization Followed by Shot Peening on Fatigue Property of 20CrMnTi Steel," Journal of Materials Engineering and Performance, Vol. 14, No. 5, pp. 591-595, 2005. https://doi.org/10.1361/105994905X64495
- Major, S., Jakl, V., and Hubalovsky, S., "Effect of Carburizing on Fatigue Life of High Strength Steel Specimen under Push-Pull Loading," Advances in Engineering Mechanics and Materials, pp. 143-146, 2014.
- Choi, H. M., Park, Y. H., Shin, Y. T., and Kim, M. H., "The Effect of Fatigue Strength according to Carburizing Depth," Journal of Welding and Joining, Vol. 32, No. 4, pp. 34-38, 2014. https://doi.org/10.5781/JWJ.2014.32.4.34
Cited by
- Estimation of Conditions of Incremental Hot Rotary Forging Process for Monobloc Tubular Drive Shaft vol.33, pp.4, 2016, https://doi.org/10.7736/KSPE.2016.33.4.287
- A Study on the Development of the Driveshaft for a 3.5-Ton Commercial Vehicle vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.153