DOI QR코드

DOI QR Code

Correlation between chloride-induced corrosion initiation and time to cover cracking in RC Structures

  • Hosseini, Seyed Abbas (Department of Civil Engineering, University of Sistan and Baluchestan) ;
  • Shabakhty, Naser (Department of Civil Engineering, University of Sistan and Baluchestan) ;
  • Mahini, Seyed Saeed (Discipline of Civil and Environmental Engineering, The University of New England)
  • Received : 2015.06.10
  • Accepted : 2015.10.16
  • Published : 2015.10.25

Abstract

Numerical value of correlation between effective parameters in the strength of a structure is as important as its stochastic properties in determining the safety of the structure. In this article investigation is made about the variation of coefficient of correlation between effective parameters in corrosion initiation time of reinforcement and the time of concrete cover cracking in reinforced concrete (RC) structures. Presence of many parameters and also error in measurement of these parameters results in uncertainty in determination of corrosion initiation and the time to crack initiation. In this paper, assuming diffusion process as chloride ingress mechanism in RC structures and considering random properties of effective parameters in this model, correlation between input parameters and predicted time to corrosion is calculated using the Monte Carlo (MC) random sampling. Results show the linear correlation between corrosion initiation time and effective input parameters increases with increasing uncertainty in the input parameters. Diffusion coefficient, concrete cover, surface chloride concentration and threshold chloride concentration have the highest correlation coefficient respectively. Also the uncertainty in the concrete cover has the greatest impact on the coefficient of correlation of corrosion initiation time and the time of crack initiation due to the corrosion phenomenon.

Keywords

References

  1. ACI Building Code Requirements for Structural Concrete (ACI 318M-11) (2011), American Concrete Institute, Farmington Hills.
  2. Alonso, C., Andrade, C., Castellote, M. and Castro, P. (2000), "Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar", Cement Concrete Res., 30(7), 1047-1055. https://doi.org/10.1016/S0008-8846(00)00265-9
  3. Alonso, C., Andrade, C., Rodriguez, J. and Diez, J.M. (1998), "Factors controlling cracking of concrete affected by reinforcement corrosion", Mater. Struct., 31, 435-441. https://doi.org/10.1007/BF02480466
  4. Amey, S.L., Johnson, D.A., Miltenberger, M.A. and Farzam, H. (1998), "Predicting the service life of concrete marine structures: an environmental methodology", ACI Struct. J., 95(2), 205-214.
  5. Bamforth, P.B. (1999), "The derivation of input data for modeling chloride ingress from eight year UK coastal exposure trials", Mag. Concrete Res., 51(2), 87-96. https://doi.org/10.1680/macr.1999.51.2.87
  6. Bamforth, P.B. and Price, W.F. (1997), An International Review of Chloride Ingress Into Structural Concrete, Contractor report 359, Taywood engineering Ltd and Emerson M.
  7. Bamforth, P.B. (2004), Technical Report No. 61: Enhancing Reinforced Concrete Durability- Guidance on Selecting Measures for Minimizing the Risk of Reinforcement in Concrete, Concrete Society.
  8. Bhargava, K., Mori, Y. and Ghosh, A.K. (2011), "Time-dependent reliability of corrosion-affected RC beams. Part 3: Effect of corrosion initiation time and its variability on time-dependent failure probability", Nucl. Eng. Des., 241, 1395-1402. https://doi.org/10.1016/j.nucengdes.2010.06.039
  9. Collepardi, M., Marcialis, A. and Turriziani, R. (1972), "Penetration of chloride ions into cement pastes and concretes", J. Am. Ceram. Soc., 55(10), 534-535. https://doi.org/10.1111/j.1151-2916.1972.tb13424.x
  10. Der Kiureghian, A. and Liu, P.L. (1986), "Structural reliability under incomplete probability information" J. Eng. Mech., 112(1), 85-104. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:1(85)
  11. Duffo, G.S., Morris, W., Raspini, I. and Saragovi, C. (2004), "A study of steel rebars embedded in concrete during 65 years", Corros Sci., 46, 2143-2157. https://doi.org/10.1016/j.corsci.2004.01.006
  12. DuraCrete-Statistical Quantification of the Variables in the Limit State Functions (R9) (2000), Civieltechnisch Centrum Uitvoering Research en Regelgeving, Gouda.
  13. El Maaddawy, T. and Soudki, K. (2007), "A model for prediction of time from corrosion initiation to corrosion cracking", Cement Concrete Compos., 29, 168-175. https://doi.org/10.1016/j.cemconcomp.2006.11.004
  14. Enright, M.P. and Frangopol, D.M. (1998), "Probabilistic analysis of resistance degradation of Reinforced Concrete Bridge beams under corrosion", Eng. Struct., 20(11), 960-971. https://doi.org/10.1016/S0141-0296(97)00190-9
  15. Firouzi, A. and Rahai, A. (2012), "An integrated ANN-GA for reliability based inspection of concrete bridge decks considering extent of corrosion-induced cracks and life cycle costs", Scientia Iranica, 19(4), 974-981. https://doi.org/10.1016/j.scient.2012.06.002
  16. Jamali, A., Angst, U., Adey, B. and Elsener, B. (2013), "Modeling of corrosion-induced concrete cover cracking: A critical analysis", Constr. Build. Mater., 42, 225-237. https://doi.org/10.1016/j.conbuildmat.2013.01.019
  17. Hasofer, A.M and Lind, N.C. (1974), "Exact and invariant second moment code format", J. Eng. Mech., 100, 111-121.
  18. Hosseini, S.A., Shabakhty, N. and Mahini, S.S. (2014), "The effect of uncertainties on calculation of initiation of corrosion of reinforcement for assessment of reliability of concrete structures", J. Civil Eng. Urban, 4(4), 364-369.
  19. Li, Y., Vrouwenvelder, T. and Wijnants, G. (2003), "Spatial variability of concrete degradation", Life-Cycle Performance of Deteriorating Structures, 49-58.
  20. Lin, S.H. (1990), "Chloride diffusion in a porous concrete slab", Corrosion, 46(12), 964-967. https://doi.org/10.5006/1.3585052
  21. Liu, Y. and Weyers, R.E. (1998), "Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures", ACI Mater. J., 95(6), 675-681.
  22. Lu, C., Jin, W. and Liu, R. (2011), "Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures", Corros Sci., 53, 1337-1347. https://doi.org/10.1016/j.corsci.2010.12.026
  23. Lu, Z.H., Zhao, Y.G., Yu, Z.W. and Ding, F.X. (2011), "Probabilistic evaluation of initiation time in RC bridge beams with load-induced cracks exposed to de-icing salts", Cement Concrete Res., 41(3), 365-372. https://doi.org/10.1016/j.cemconres.2010.12.003
  24. Moodi, F., Ramezanianpour, L. and Jahangiri, E. (2014), "Assessment of some parameters of corrosion initiation prediction on reinforced concrete in marine environments", Comput. Concrete, 13(1), 71-82. https://doi.org/10.12989/cac.2013.13.1.071
  25. Nataf, A. (1962), "Determination des distributions dont les marges sont donnees", Comptes Rendus Academie des Sciences, 225, 42-43.
  26. Nowak, A.S. and Collins, K.R. (2012), Reliability of Structures, 2th Edition, McGraw-Hill, Singapore.
  27. Oh, B.H. and Jang, S.Y. (2007), "Effects of material and environmental parameters on chloride penetration profile in concrete structures", Cement Concrete Res., 37, 37-53.
  28. Polder, R.B. and Rooij, M.R. (2002), "Investigation of the concrete structure of the Pier of Scheveningen after 40 years of exposure to marine environment", TNO Building and Construction Research, Delft.
  29. Reale, T. and O'Connor, A. (2012), "A review and comparative analysis of corrosion-induced time to first crack models", Constr. Build. Mater., 36, 475-483. https://doi.org/10.1016/j.conbuildmat.2012.06.033
  30. Rodriguez, J., Ortega, L., Casal, J. and Diez, J. (1996), "Corrosion of reinforcement and service life of concrete structures", Durab. Build. Mater. Compon., 1(1), 117-126.
  31. Stewart, M.G. and Mullard, J.A. (2007), "Spatial time-dependent reliability analysis of corrosion damage and the timing of first repair for RC structures", Eng. Struct., 29, 1457-1464. https://doi.org/10.1016/j.engstruct.2006.09.004
  32. Stuart, A.J. (1958), "Equally correlated variates and multinormal integral", J. Roy. Statis. Soc., B20, 373-378.
  33. Tang, L. and Gulikers, J. (2007), "On the mathematics of time-dependent chloride coefficient in concrete", Cement Concrete Res., 37, 589-595. https://doi.org/10.1016/j.cemconres.2007.01.006
  34. Vu, K.A.T., Stewart, M.G. and Mullard, J.A. (2005), "Corrosion-induced cracking: experimental data and predictive models", ACI Struct. J., 102(5), 719-726.
  35. Webster, M.P. (2000), "The assessment of corrosion-damaged concrete structures", Ph.D. Dissertation, The University of Birmingham, Birmingham.
  36. Yu, H., Chiang, K.K. and Yang, L. (2012), "Threshold chloride level and characteristics of reinforcement corrosion initiation in simulated concrete pore solutions", Constr. Build. Mater., 26, 723-729. https://doi.org/10.1016/j.conbuildmat.2011.06.079

Cited by

  1. Prediction of initiation time of corrosion in RC using meshless methods vol.16, pp.5, 2015, https://doi.org/10.12989/cac.2015.16.5.669
  2. Input Value Correlation in Chloride Ion Ingress Modelling and Concrete Structures Reliability vol.761, 2018, https://doi.org/10.4028/www.scientific.net/KEM.761.127
  3. Numerical technique for chloride ingress with cover concrete property and time effect vol.20, pp.2, 2015, https://doi.org/10.12989/cac.2017.20.2.185
  4. Sensitivity analysis of flexural strength of RC beams influenced by reinforcement corrosion vol.72, pp.4, 2015, https://doi.org/10.12989/sem.2019.72.4.479
  5. Non-destructive evaluation of steel and GFRP reinforced beams using AE and DIC techniques vol.77, pp.5, 2015, https://doi.org/10.12989/sem.2021.77.5.637