Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Property Variations of Handsheets by Mixing Ratios of Sw-BKP, Hw-BKP, and PVA Fibers

Sw-BKP, Hw-BKP, PVA 섬유의 배합비에 따른 수초지의 물성과 파괴인성의 변화

  • Yoon, Sang-Gu (Chungbuk National University, College of Agriculture, Life & Environment Sciences, Dept. of Forest Product & Engineering) ;
  • Park, Jong-Moon (Chungbuk National University, College of Agriculture, Life & Environment Sciences, Dept. of Forest Product & Engineering)
  • 윤상구 (충북대학교 농업생명환경대학 임산공학과) ;
  • 박종문 (충북대학교 농업생명환경대학 임산공학과)
  • Received : 2015.08.12
  • Accepted : 2015.08.22
  • Published : 2015.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

In order to improve the strength of paper, mixing ratio of Sw-BKP and Hw-BKP and PVA (polyvinyl alcohol) fibers dosage were investigated. When the Sw-BKP fraction was increased, strength properties were increased because of average fibers length increased. When PVA fraction increased, paper strength was increased, but there was dissolution of PVA in water. The reason for improving handsheet strength that contained PVA was due to increased bonding action between the fibers by the PVA. The addition of PVA to kraft pulp would be helpful for packaging paper materials to increase strength and fracture toughness.

Keywords

References

  1. ISO 17958, Paper and board - Determination of fracture toughness - constant rate of elongation method (1.7 mm/s) (2013).
  2. Seth, R. S. and Page, D. H., Fracture resistance of paper, J. Materials Sci. 9:1745-1753 (1974). https://doi.org/10.1007/BF00541741
  3. Wanigaratne, D. M. S., Batchelor, W. J., and Parker, I. H, Comparison of fracture toughness of paper with tensile properties, Appita J. 55(5):369-385 (2002).
  4. Lee, H. L., Lee, B. J., Shin, D. S., Lim, K. P., Seo, Y. B., Won, J. M., and Sohn, C. M., Paper Science, Gwangil munhwasa, pp. 406-407 (2000) (in Korean).
  5. Sakurada, I., Polyvinyl Alcohol Fibers (Vol. 6), CRC Press, p. 15 (1985).
  6. Youn, H. J. and Shin, D. S., Effect of beating and pressing on fracture toughness of paper, Journal of Korea TAPPI 32(4):1-9(2000).
  7. Lee, J. H., Change of paper's physical and fracture mechanical properties depending on fibers properties, Master's Thesis, Chungbuk National University, Republic of Korea (2003).
  8. Park, J. M., Study of Yield and Fracture of Paper, Ph. D. Thesis, State University of New York, USA (1993).
  9. Shin, J. H., Sohn, C. M., and Ow, S. K., Effect of PVA fibers on paper properties (I): Relationship between water contents of wet web and fiber bonding, Journal of Korea TAPPI 27(4):7-15 (1995).