DOI QR코드

DOI QR Code

양면형 BIPV 시스템의 커튼월 적용에 따른 온도 및 발전특성 분석

Analysis of Temperature and Power Generation Characteristics of Bifacial BIPV System Applied into Curtain Wall

  • 강준구 (공주대학교 건축학과 대학원) ;
  • 김용재 (공주대학교 건축학과 대학원) ;
  • 김준태 (공주대학교 건축학부)
  • Kang, Jun-Gu (Dept. of Architecture, Graduate School, Kongju National University) ;
  • Kim, Yong-Jae (Dept. of Architecture, Graduate School, Kongju National University) ;
  • Kim, Jun-Tae (Dept. of Architectural Eng., Kongju National University)
  • 투고 : 2015.07.21
  • 심사 : 2015.08.27
  • 발행 : 2015.08.30

초록

BIPV system not only produces electricity at building, but also acts as a material for building envelope. Thus, it can increase the economical efficiency of PV system by saving the cost for building materials. Bifacial solar cell can convert solar energy to electrical energy from both sides of the cell. In addition, it is designed as 3 busbar layout which is the same with ordinary mono-facial solar cells. Therefore, many of the module manufacturers can easily use the bifacial solar cells without changing their manufacturing equipments. Moreover, bifacial PV system has much potential in building application by utilizing glass-to-glass structure of PV module. However, the electrical generation of the bifacial PV module depends on the characteristics of the building surface which faces the module, as well as outdoor environment. Therefore, in order to apply the bifacial PV module to building envelope as BIPV system, its power generation characteristics are carefully evaluated. For this purpose this study focused on the electrical performance of the bifacial BIPV system through the comparative outdoor experiments. As a result, the power generation performance of the bifacial BIPV system was improved by up to 21% compared to that of the monofacial BIPV system. Therefore, it is claimed that the bifacial BIPV system can replace the conventional BIPV system to improve the PV power generation in buildings.

키워드

참고문헌

  1. H.M.S. Hussein, G.E. Ahmad and H.H. El-Ghetany, Performance Evaluation of Photovoltaic Modules at Different Tilt Angles and Orientations, Energy Conversion and Management, Vol. 45, pp.2441-2452, 2004. https://doi.org/10.1016/j.enconman.2003.11.013
  2. X. Gong and M .Kulkarmi, Design Optimization of a Large Scale Rooftop Photovoltaic System, Solar Energy, Vol. 78, pp.362-374, 2005. https://doi.org/10.1016/j.solener.2004.08.008
  3. A. J. Carr and T.L. Pryor, A Comparison of the Performanc of Different PV Module Types in Temperate Climates, Solar Energy, Vol. 76, pp.285-29, 2004. https://doi.org/10.1016/j.solener.2003.07.026
  4. Kim. J.T. Development of Energy-Efficient Multi-Functional Roof Air Heating System, Kongju, Ministry of Knowledge Economy, 2008.
  5. J. E. Cotter, J. H. Guo, P. J. Cousins, M. D. Abbott, F. W. Chen, and K. C. Fisher, P-Type Versus n-Type Silicon Wafers: Prospects for High-Efficiency Commercial Silicon Solar Cells, IEEE Transactions on Electron Devices, Vol. 53, No. 8, pp.1893-1901, 2006. https://doi.org/10.1109/TED.2006.878026
  6. T. Buck, R. Kopecek, J. Libal, A. Herguth, K. Peter, I. Rover, K. Wambach and B. Geerligs, Industrial Screen Printed N-type Silicon Solar Cells with Front Boron Emitter and Efficiencies Exceeding 17%, Proceedings of the 21st European Photovoltaic Solar Energy Conference, pp.1264-1267, 2006.
  7. I. Chambouleyron and Y. Chevalier,, Silicon Double Solar Cell, Proceedings of the European Photovoltaic Solar Energy Conference, pp.623-633, 1997.
  8. A. Krenzinger, E. Lorenzo, Estimation of Radiation Incident on Bifacial Albedo-Collecting Panels, Solar Energy, Vol. 4, No. 5, pp.297-319, 1986.
  9. P. Ooshaksaraei, K. Sopian, R. Zulkifli, M.A. Alghoul and S.H. Zaidi, Characterization of a Bifacial Photovoltaic Panel Integrated with External Diffuse and Semimirror Type Reflectors, International Journal of Photoenergy, Article ID 465837, pp.7-15, 2013.
  10. T. Joge, Y. Eguchi, Y. Imazu, I. Araki, T. Uematsu, and K. Matsukuma, Applications and Feld Tests of Bifacial Solar Modules, IEEE 29th Conference : Photovoltaic Specialists Conference, Vol. 29, pp.1549-1552, 2002.
  11. A. Moehlecke, F.S. Febras and I. Zanesco, Electrical Performance Analysis of PV Modules with Bifacial Silicon Solar Cells and White Diffuse Reflector, Solar Energy, Vol. 96, pp.253-262. 2013. https://doi.org/10.1016/j.solener.2013.07.028
  12. R. Hezel, Novel Applications of Bifacial Solar Cells, Progress in Photovoltaics: Research and Applications, Vol. 11, pp.549-556. 2003. https://doi.org/10.1002/pip.510

피인용 문헌

  1. Evaluation of Power Generation Performance for Architectural Applications of Louver-integrated Bifacial Solar Modules :Focus on clear day’s data vol.20, pp.5, 2020, https://doi.org/10.12813/kieae.2020.20.5.129