The Journal of Advanced Prosthodontics

  • 제7권4호
  • /
  • Pages.312-316
  • /
  • 2015
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

In vitro evaluation of the bond strength between various ceramics and cobalt-chromium alloy fabricated by selective laser sintering

  • Bae, Eun-Jeong (Department of Dental Laboratory Science and Engineering, Korea University) ;
  • Kim, Hae-Young (Department of Dental Laboratory Science and Engineering, Korea University) ;
  • Kim, Woong-Chul (Department of Dental Laboratory Science and Engineering, Korea University) ;
  • Kim, Ji-Hwan (Department of Dental Laboratory Science and Engineering, Korea University)
  • 투고 : 2015.02.11
  • 심사 : 2015.05.13
  • 발행 : 2015.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

키워드

참고문헌

  1. van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12. https://doi.org/10.1016/j.dental.2011.10.014
  2. Moldovan O, Luthardt RG, Corcodel N, Rudolph H. Threedimensional fit of CAD/CAM-made zirconia copings. Dent Mater 2011;27:1273-8. https://doi.org/10.1016/j.dental.2011.09.006
  3. Wu L, Zhu H, Gai X, Wang Y. Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting. J Prosthet Dent 2014;111:51-5. https://doi.org/10.1016/j.prosdent.2013.09.011
  4. Deckard CR. Method and apparatus for producing parts by selective sintering. United States Patent. US4863538 A. 1989 Sep 5.
  5. Feygin M. Apparatus and method for forming an integral object from laminations. United States Patent US5354414 A. 1994 Oct 11.
  6. Nieva N, Arreguez C, Carrizo R, Mole CS, Lagarrigue GM. Bonding strength evaluation on metal/ceramic interfaces in dental materials. Proc Mater Sci 2012;1:475-82. https://doi.org/10.1016/j.mspro.2012.06.064
  7. Donovan TE. Porcelain-fused-to-metal (PFM) alternatives. J Esthet Restor Dent 2009;21:4-6. https://doi.org/10.1111/j.1708-8240.2008.00222.x
  8. Wataha JC. Alloys for prosthodontic restorations. J Prosthet Dent 2002;87:351-63. https://doi.org/10.1067/mpr.2002.123817
  9. Zinelis S, Tsetsekou A, Papadopoulos T. Thermal expansion and microstructural analysis of experimental metal-ceramic titanium alloys. J Prosthet Dent 2003;90:332-8. https://doi.org/10.1016/S0022-3913(03)00493-1
  10. Reyes MJ, Oshida Y, Andres CJ, Barco T, Hovijitra S, Brown D. Titanium-porcelain system. Part III: effects of surface modification on bond strengths. Biomed Mater Eng 2001;11: 117-36.
  11. Steiner PJ, Kelly JR, Giuseppetti AA. Compatibility of ceramic-ceramic systems for fixed prosthodontics. Int J Prosthodont 1997;10:375-80.
  12. Craig RG, Ward ML. Restorative dental materials 10th ed. St. Louis, MO; Mosby; 1997.
  13. Al Amri MD, Hammad IA. Shear bond strength of two forms of opaque porcelain to the metal substructure. King Saud Univ J Dent Sci 2012;3:41-8.
  14. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG, Geraldeli S. Ceramic materials for porcelain veneers: part II. Effect of material, shade, and thickness on translucency. J Prosthet Dent 2014;112:864-70. https://doi.org/10.1016/j.prosdent.2014.05.016
  15. Wang CH, Wu JH, Li HY, Wang PP, Lee HE, Du JK. Fracture resistance of different metal substructure designs for implant-supported porcelain-fused-to-metal (PFM) crowns. J Dent Sci 2013;8:314-20. https://doi.org/10.1016/j.jds.2013.04.007
  16. Souza JC, Henriques B, Ariza E, Martinelli AE, Nascimento RM, Silva FS, Rocha LA, Celis JP. Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V. Mater Sci Eng C Mater Biol Appl 2014;37:76-83. https://doi.org/10.1016/j.msec.2013.12.030
  17. e-Manufacturing Solutions. Instructions for use: EOS Cobalt Chrome SP2. 2011 Available from: http://ip-saas-eos-cms.s3.amazonaws.com/public/32ff6c9b7964c1c9/7c73a9305d8007c47dec2e65196f09e5/EOS_CobaltChrome_SP2_en.pdf.
  18. ISO 9693. Metal-ceramic dental restorative systems. 2nd ed. Geneva, Switzerland; International Organization for Standardization;1999.
  19. Lei YC. The influence of different thermal expansion coefficient (TEC) between ceramic and metal on thermal stability of porcelain-fused-to-metal (PFM) crown. Zhonghua Kou Qiang Yi Xue Za Zhi 1991;26:329-32, 388.
  20. Korkmaz T, Asar V. Comparative evaluation of bond strength of various metal-ceramic restorations. Mater Des 2009;30:445-51. https://doi.org/10.1016/j.matdes.2008.06.002
  21. Joias RM, Tango RN, Junho de Araujo JE, Junho de Araujo MA, Ferreira Anzaloni Saavedra Gde S, Paes-Junior TJ, Kimpara ET. Shear bond strength of a ceramic to Co-Cr alloys. J Prosthet Dent 2008;99:54-9. https://doi.org/10.1016/S0022-3913(08)60009-8
  22. Kulunk T, Kurt M, Ural C, Kulunk S, Baba S. Effect of different air-abrasion particles on metal-ceramic bond strength. J Dent Sci 2011;6:140-6. https://doi.org/10.1016/j.jds.2011.05.003
  23. Bae EJ, Kim JH, Kim WC, Kim HY. Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering. J Adv Prosthodont 2014;6:266-71. https://doi.org/10.4047/jap.2014.6.4.266
  24. Liu Y, Wang Z, Gao B, Zhao X, Lin X, Wu J. Evaluation of mechanical properties and porcelain bonded strength of nickel-chromium dental alloy fabricated by laser rapid forming. Lasers Med Sci 2010;25:799-804. https://doi.org/10.1007/s10103-009-0690-3
  25. de Melo RM, Travassos AC, Neisser MP. Shear bond strengths of a ceramic system to alternative metal alloys. J Prosthet Dent 2005;93:64-9. https://doi.org/10.1016/j.prosdent.2004.10.017

피인용 문헌

  1. Computer-aided design and manufacturing of surgical templates and their clinical applications: a review vol.13, pp.9, 2016, https://doi.org/10.1080/17434440.2016.1218758
  2. Emergence of 3D Printed Dosage Forms: Opportunities and Challenges vol.33, pp.8, 2016, https://doi.org/10.1007/s11095-016-1933-1
  3. Dimensional accuracy of dental casting patterns created by 3D printers vol.35, pp.2, 2016, https://doi.org/10.4012/dmj.2015-278
  4. Surface Characteristics of Base Metal Dental Alloys Processed by Alternative Procedures vol.376, pp.1662-9507, 2017, https://doi.org/10.4028/www.scientific.net/DDF.376.1
  5. Laser Sintering Technology and Balling Phenomenon pp.1557-8550, 2018, https://doi.org/10.1089/pho.2017.4311
  6. Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique vol.10, pp.1, 2018, https://doi.org/10.4047/jap.2018.10.1.25
  7. Evaluation of adaptation of the polylactic acid pattern of maxillary complete dentures fabricated by fused deposition modelling technology: A pilot study vol.13, pp.8, 2018, https://doi.org/10.1371/journal.pone.0201777
  8. Three-Dimensional Printing in Analytical Chemistry: Principles and Applications vol.49, pp.18, 2015, https://doi.org/10.1080/00032719.2016.1166370
  9. Effects of heat treatment on the microstructure, residual stress, and mechanical properties of Co–Cr alloy fabricated by selective laser melting vol.126, pp.None, 2015, https://doi.org/10.1016/j.jmbbm.2021.105051