References
- 임홍철, 마향화, 이석용, 이근우, 오진원, "철근부식 표면측정법 모델링을 통한 콘크리트 내 철근 탐사", 한국콘크리트학회, 제21권, 제2호, pp.153-158, 2009. https://doi.org/10.4334/JKCI.2009.21.2.153
- 오병환, 엄주용, 권지훈, "에폭시 도포철근의 내 부식성능에 관한 실험적 연구", 한국콘크리트 학회, 제4권, 제4호, pp.161-170, 1992.
- E. Ramirez, J. A. Gonzalez, and A. Bautista, "The Protective Efficiency of Galvanizing against Corrosion of Steel in Mortar and in Ca(OH)2 Saturated Solutions Containing Chlorides," Cement and Concrete Research, Vol.26, No.10, pp.1525-1536, 1996. https://doi.org/10.1016/0008-8846(96)00150-0
- 신성우, 안종문, 한범석, 서대원, "FRP 보강근을 주근으로 사용한 콘크리트보의 보강비 효과", 대한건축학회, 제22권, 제6호, pp.19-26, 2006.
- ACI 440.1R-06, Guide for the Design and Construction of concrete reinforce with FRP bars, ACI Committee 440, 2006.
- 한국건설기술연구원, FRP Hybrid Bar를 활용한 해양항만구조물 수명 향상 기술 개발, 2013.
- J. H. Bungey, The Testing of Concrete in Structures, Surrey University Pub, Glasgow, 1982.
- R. Jones, A Review of the Non-destructive Testing of Concrete, Institution of Civil Engineers and the British National Committee for Non-destructive Testing, pp.1-7, 1970.
- V. R. Sturrup, R. J. Vechio, and H. Caratin, "Pulse velocity as a measure of concrete compressive strength," ACI Special Publication, 1984.
- D. W. Seo, K. T. Park, Y. J. You, and H. Y. Kim, "Enhancement in Elastic Modulus of GFRP Bars by Material Hybridization," Engineering, Vol.5, No.11, pp.865-869, 2013. https://doi.org/10.4236/eng.2013.511105
- D. W. Seo, K. T. Park, Y. J. You, and H. Y. Kim, "Evaluation for Tensile Performance of Recently Developed FRP Hybrid Bars," IJETAE, Vol.4, No.6, pp.631-637, 2014.
- P. Grosser, "ULTRASONIC DETECTION AND MEASURING OF ISOLATED OR PITTING CORROSION," 12th APCNDT, 2006.
- K. R. Olsen, "ULTRASONIC DETECTION OF SIMULATED CORROSION IN 1 INCH DIAMETER STEEL TIEBACK RODS," Doctoral Dissertation, Wasjington State University, Department of Civil and Environmental Engineering, 2009.
- W. Yeih and R. Huang, "DETECTION OF THE CORROSION DAMAGE IN REINFORCED CONCRETE MEMBERS BY ULTRASONIC TESTING," Cement and Concrete Research, Vol.28, No.7, pp.1071-1083, 1998. https://doi.org/10.1016/S0008-8846(98)00060-X
- 한국콘크리트학회, 해양 콘크리트의 염해 내구성 및 설계, 기문당, 2010.
- 임홍철, 마향화, 이석용, 이근우, 오진원, "철근부식 표면측정법 모델링을 통한 콘크리트 내 철근 탐사", 한국콘크리트학회, 제21권, 제2호, pp.153-158, 2009. https://doi.org/10.4334/JKCI.2009.21.2.153
- J. P. Broomfield, Corrosion of Steel in Concrete : Understanding, Investigation and Repair, E&FN, London, 1997.
- S. J. Kwon, U. J. Na, S. S. Park, and S. H. Jung, "Service Life Prediction of Concrete Wharves with Early-Aged Crack : Probabilistic Approach for Chloride Diffusion," Structural Safety, Vol.31, No.1, pp.75-83, 2009. https://doi.org/10.1016/j.strusafe.2008.03.004
- CEB, New Approach to Durability Design, 1997.
- S. H. Baek, X. Wiliam, Q. Maria, and S. J. Kwon, "Nondestructive Corrosion Detection in RC Through Integrated Heat Induction and IR Thermography," Journal of Nondestructive Evaluation, Vol.31, No.2, pp.181-190, 2012. https://doi.org/10.1007/s10921-012-0133-0
- S. Sakurada, H. Irie, and Y. Yoshida, "Development of Reinforced Concrete Corrosion Amount Presumption Method by Ultrasonic Method," 17th World Conference on Nondestructive Testing, Shanghai, China, pp.1-6, 2008.
- 김윤용, 오광진, 박기태, 권성준, "공극구조 및 하중조건에 따른 콘크리트의 초음파 속도 모델링", 콘텐츠학회논문집, 제15권, 제3호, pp.415-426, 2015.
- BS 1881 : Part 203, Recommendations for Measurement of Velocity of Ultrasonic Pulses in Concrete, British Standards Institution, pp.56-58, 1986.