한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제14권4호
  • /
  • Pages.100-107
  • /
  • 2015
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

알루미늄 합금 6061에서 와이어 진동부가에 의한 와이어 컷 방전가공에 따른 표면 거칠기 특성(II)

Characteristics of Surface Roughness According to Wire Vibration Wire-cut Electric Discharge Machining of Aluminum Alloy 6061(II)

  • 류청원 (한국폴리텍대학 달성캠퍼스 컴퓨터응용기계학과) ;
  • 최성대 (금오공과대학교 지능기계공학과)
  • Ryu, Cheong-Won (Department of Computer Applied Mechanical, Dalseong Campus of Korea Polytechnic college) ;
  • Choi, Seong-Dae (Department of Intelligent Mechanical Engineering, Kumoh Institute of Technology)
  • 투고 : 2015.05.11
  • 심사 : 2015.07.12
  • 발행 : 2015.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M. and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration.

키워드

참고문헌

  1. Hassan, E. H., "Advanced Machining Processes: Nontraditional and Hybrid Machining Processes," McGraw-Hill, pp. 115 - 139, 2005.
  2. Kim, M. Y. Byiringiro, J. B. Park, J. K. and Ko, T. J., "A Study of EDM and Milling Hybrid Machining," Proceeding of KSMTE 2010 Spring Conference, pp. 24, 2010.
  3. Pramila, A., "Natural Frequencies of a Submerged Axially Moving Band," Journal of Sound and Vibration, Vol. 113, pp. 198 - 203, 1987. https://doi.org/10.1016/S0022-460X(87)81354-8
  4. Wickert, J. A. Mote, C. D. and Jr., "Classical Vibration Analysis of Axially Moving Continua," Journal of Applied Mechanics, Vol. 57, pp. 738 - 744, 1990. https://doi.org/10.1115/1.2897085
  5. Lee, S. Y. Mote, C. D. and Jr., "Traveling Wave Dynamic In a Translating String Coupled To Stationary Constraints: Energy Transfer And Mode Localization," Journal of Sound and Vibration, Vol. 212, No.1, pp.1-22, 1998. https://doi.org/10.1006/jsvi.1997.1285
  6. Chae, H. J. and Lee, S. Y., "Vibration Characteristics and Tension Control of a Wire in WEDM," J. Korean Soc. Precis. Eng., Vol. 18 No. 11, pp. 86 - 92, 2001.
  7. Ryu, C. W. and Choi, S. D., "Characteristics of Surface Roughness Based on Wire Vibration and Wire-cut Electric Discharge Machining of Aluminum Alloy 6061 (I)" Journal of KSMPE, Vol. 14 No. 2, pp. 59 - 66, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.059

피인용 문헌

  1. 냉간 금형용 공구강의 Cu 전극을 이용한 방전 탭에 관한 연구 vol.15, pp.5, 2015, https://doi.org/10.14775/ksmpe.2016.15.5.131
  2. 냉간 금형용 공구강의 Cu 전극을 이용한 방전 탭에 관한 연구 vol.15, pp.5, 2015, https://doi.org/10.14775/ksmpe.2016.15.5.131
  3. 리드용 와이어의 Von Mises 응력 최소화를 위한 최적설계 vol.16, pp.4, 2017, https://doi.org/10.14775/ksmpe.2017.16.4.119