한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제14권4호
  • /
  • Pages.43-48
  • /
  • 2015
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

초점보정 렌즈설계 및 3D 프린터 이용 가공 특성평가(I)

Optimum Design and Characterization of F-Theta Lens by a 3D Printer(I)

  • 신현명 (계명대학교 기계자동차공학과) ;
  • 윤성철 (계명대학교 기계공학과 대학원) ;
  • 최해운 (계명대학교 기계자동차공학과)
  • Shin, Hyun-Myung (Department of Mechanical and Automotive Engineering, Keimyung University) ;
  • Yoon, Sung-Chul (Graduate school of Mechanical Engineering, Keimyung University) ;
  • Choi, Hae-Woon (Department of Mechanical and Automotive Engineering, Keimyung University)
  • 투고 : 2015.03.27
  • 심사 : 2015.06.12
  • 발행 : 2015.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A focal length-correcting lens called the F-theta lens is required to compensate for the different focus on spot size due to the deflected incident laser beam. The F-theta lens was designed by the ray tracing method and fabricated by a 3D printer with polymer-based material. The designed F-theta lens is able to compensate for the focus on spot size by an incidence angle of 0 to 2 degrees. Based on the analysis of the simulation, there was almost no aberration in the $0^{\circ}C$ incidence angle, and the maximum of $50{\mu}m$ of aberration was observed at the incidence angle of $2^{\circ}$. Diffraction-encircled energy was analyzed to characterize the designed optics, and an image simulation was performed to confirm the actual image resolution.

키워드

참고문헌

  1. Shin, B. S. and Lee, J H., "Basic Experimental Investigations to UV Laser Micro-Machining of Nano-Porous Alumina Ceramic Material," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 62-67, 2012.
  2. Yang, S. Y. Choi, S. D., Choi, M. S. and Chun, C. M., "Characteristics of Surface Hardened Press Die Materials by $CO_2$ Laser Beam Irradiation," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 31-37, 2011.
  3. Lee, J. Y., Yoon, J. W, Kang, M. C. and Cho, S. H., "Comparison of Ablation Characteristics of Carbon Nanotube reinforced Hybrid $Al_2O_3$ by using Ultrashort Pulse Laser," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 6, pp. 23-39, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.023
  4. Wu, H., Wang, Z., Fu, R. and Liu, J., "Design of a hybrid diffractive/refractive achromatized telecentric f-h lens," Optik - International Journal for Light and Electron Optics, Vol. 117, No. 6, pp. 271-276, 2006. https://doi.org/10.1016/j.ijleo.2005.09.010
  5. Han, S. B. and Choi, H. W., "Dual Laser Beam Joining Process for Polymers in Automotive Applications to Reduce Weights," Journal of Korean Welding and Joining Society, Vol. 31, No. 4, pp. 23-27, 2013. https://doi.org/10.5781/KWJS.2013.31.4.23
  6. Special Optics (2015), "Custom Lens Design," Retrieved 1, Mat., 2015, from http://www.specialoptics.com.
  7. Alda, J., Rico-Garcia, J., Lopez-Alonso, J., Lail, B. and Boreman, G., "Design of Fresnel lenses and binary-staircase kinoforms of low value of the aperture number," Optics communications, 260, pp. 454-461, 2006. https://doi.org/10.1016/j.optcom.2005.10.080
  8. Haghighatzadeh, A. and Saadat, S., "Theoretical modeling of the divergence of a flat-topped beam from a two-stage beam shaper into a conical intensity profile after propagation in free space," Optics Communications, 313, pp. 49-55, 2014. https://doi.org/10.1016/j.optcom.2013.08.091

피인용 문헌

  1. 레이저 소결 적층 시스템과 실험 계획법을 이용한 3차원 바이오 세라믹 인공지지체의 제작 vol.18, pp.12, 2015, https://doi.org/10.14775/ksmpe.2019.18.12.059