한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제14권2호
  • /
  • Pages.19-24
  • /
  • 2015
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

SCM 415H 기어의 치면 연삭조건에 관한 연구

Study on the Teeth Grinding Condition of SCM415H Gears

  • 김래성 (경상대학교 항공IT기계융합사업단) ;
  • 김종인 (지원) ;
  • 최창 (경상대학교 기계항공공학부, 항공기부품기술연구소) ;
  • 양용군 (경상대학교 기계항공공학부, 항공기부품기술연구소) ;
  • 류성기 (경상대학교 기계항공공학부, 항공기부품기술연구소)
  • Kim, Lae-sung (Creative AIMCEEP, Gyeongsang National Univ.) ;
  • Kim, Jongmin (Jiwon LDT.) ;
  • Choi, Chang (School of Mechanical & Aerospace Engineering, ReCAPT, Gyeongsang National Univ.) ;
  • Liang, Longjun (School of Mechanical & Aerospace Engineering, ReCAPT, Gyeongsang National Univ.) ;
  • Lyu, Sung-ki (School of Mechanical & Aerospace Engineering, ReCAPT, Gyeongsang National Univ.)
  • 투고 : 2015.03.31
  • 심사 : 2015.04.07
  • 발행 : 2015.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Gears are produced through a variety of methods. In general, a metal piece is formed into the general shape of a gear through rough cuts. The gear then moves on to a more precise machine that removes more material. Grinders work via abrasion, rubbing a rough surface against a work piece at such high speeds that it literally scrapes unwanted material away from the item. Since the grinder is spinning so fast, the material is removed very quickly. This allows a grinder to remove a very small amount without taking any unwanted material with it. This study investigates the effect of grinding process parameters like grinding spindle speed and table transfer speed on the gear grade and grinding efficiency.

키워드

참고문헌

  1. Gwangtae Kim and Jaesu Jung, "Gear Basic applied technology," Yeamoonsa, pp. 3-7, 2001.
  2. Hyun Ku Lee, Moo Suk Kim and Koo Tae Kang, "An Experimental Research for the Optimization of the Gear Grinding Machine's Operating Condition," The Korean Society for Noise and Vibration Engineering Proceedings, Vol. 20, No. 7, pp. 665-671, 2010.
  3. Altinas, Y. and Weck, M., "Chatter Stability of Metal Cutting and Grinding," CIRPAnnals Manufacturing Technology, Vol. 53, No. 2, pp. 619-642, 2004. https://doi.org/10.1016/S0007-8506(07)60032-8
  4. Park, S. S., Min, B. K., Lee, S. J., Shin, S. J., Choi, H., "The Development of the Gear Profile Grinding Machining Quality Monitoring System Using Tool Vibration Signal," KSAE 08-S0233, pp. 1406-1411, 2008.
  5. In-Hyo An, Nam-Soo Hur, In-Bum Lee, Sung-Ki Lyu, "A Study on Effect of the Grinding in SCM420H Planetary Gear," KSMPE, Vol. 11, No. 5, pp. 54-59, 2012.

피인용 문헌

  1. A Study on the Selection of Grinding Conditions and Evaluation for Curvic Coupling Tooth Machining vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.087
  2. 스러스트 내면 연삭가공의 가공면 정도에 관한 연구 vol.15, pp.5, 2015, https://doi.org/10.14775/ksmpe.2016.15.5.073