Journal of Advanced Marine Engineering and Technology

  • 제39권6호
  • /
  • Pages.609-613
  • /
  • 2015
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

한 면에 리브가 설치된 확대 정사각 채널에서 리브 각이 열전달에 미치는 효과

Effects of Rib Angles on Heat Transfer in a Divergent Square Channel With Ribs on One Wall

  • Lee, Myung Sung (Department of Mechanical & System Engineering. Gyeongsang National University) ;
  • Ahn, Soo Whan (Department of Mechanical & System Engineering, Institute of Marine Industry, Gyeongsang National University)
  • 투고 : 2015.03.13
  • 심사 : 2015.05.19
  • 발행 : 2015.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

축방향 거리에 따라 확대되는 정사각 채널에서 발달된 난류유동의 국부 난류 열전달과 압력강하를 실험적으로 조사하였다. 정사각 확대채널에 한 면에만 높이가 10 mm인 리브를 설치하였다. 리브의 충돌 각은 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 그리고 $90^{\circ}$로 한 벽면에 만 설치하였다. 레이놀즈수가 22,000~79,000의 범위에서 실험을 수행하였다. 연구 결과 $45^{\circ}$의 리브 충돌각이 가장 우수한 열전달 성능을 보였다.

In this study, the experiments are performed to investigate the local heat transfer and pressure drops of developed turbulent flows in the diverging square channels along the axial distance. The square divergent channels are manufactured with a fixed rib height (e) = 10 mm. Four different parallel angled ribs ($a=30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$) are placed on the channel's one-sided wall only. TThe measurement are conducted within the range of Reynolds numbers from 22,000 to 79,000. The results show that a rib angle-of-attack of $45^{\circ}$ produces the best heat-transfer performance.

키워드

참고문헌

  1. S. W. Ahn, H. K. Kang, S. T. Bae, and D. H. Lee, "Heat transfer and friction factor in a square channel with one, two, or four inclined ribbed walls," ASME Journal of Turbomachinery, vol. 130, no. 3, pp. 034501-5, 2008. https://doi.org/10.1115/1.2775488
  2. J. C. Han, S. Ou, J. S. Park, and C. Lei, "Augmented heat transfer in rectangular channels of narrow aspect ratios with rib turbulators," International Journal of Heat and Mass Transfer, vol. 32, no. 9, pp. 1619-1630, 1989. https://doi.org/10.1016/0017-9310(89)90044-6
  3. K. Hermanson, S. Parneix, J. Wolfersdorf and K. Semmler, "Prediction of pressure loss and heat transfer in internal cooling passages," Annals of the New York Academy of Sciences, vol. 934, no. 1, pp. 448-455, 2001. https://doi.org/10.1111/j.1749-6632.2001.tb05882.x
  4. L. Wang, W. Tao, Q. Wang, and T. T. Wong, "Experimental study of developing turbulent flow and heat transfer in ribbed convergent/divergent square ducts," International Journal of Heat and Fluid Flow, vol. 22, no. 6, pp. 603-613, 2001. https://doi.org/10.1016/S0142-727X(01)00127-8
  5. M. S. Lee, S. S. Jeong, S. W. Ahn, and J. C. Han, "Heat transfer and friction in rectangular convergent and divergent channels with ribs," AIAA Journal of Thermophysics and Heat Transfer, vol. 27, no. 4, pp. 660-667, 2013. https://doi.org/10.2514/1.T4144
  6. M. S. Lee, S. S. Jeong, S. W. Ahn, and J. C. Han, "Effects of angled ribs on turbulent heat transfer and friction factors in a rectangular divergent channel," International Journal of Thermal Sciences, vol. 84, pp. 1-8, 2014. https://doi.org/10.1016/j.ijthermalsci.2014.04.010
  7. S. J. Kline and F. A. McClintock, "Describing uncertainty in single sample experiments," Mechanical Engineering, vol. 75, pp. 3-8, 1953.
  8. J. C. Han and J. S. Park, "Developing heat transfer in rectangular channels with rib turbulators," International Journal of Heat and Mass Transfer, vol. 31, no. 1, pp. 183-195, 1988. https://doi.org/10.1016/0017-9310(88)90235-9

피인용 문헌

  1. Enhanced heat transfer in the convergent rectangular channels with ∧/∨-shaped ribs on one wall vol.40, pp.4, 2016, https://doi.org/10.5916/jkosme.2016.40.4.270