References
- Barpi, F. (2004). "Impact behaviour of concrete: A Computational Approach." Engineering Fracture Mechanics, Vol. 71, No. 15, pp. 2197-2213. https://doi.org/10.1016/j.engfracmech.2003.11.007
- Bischoff, P. H. and Perry, S. H. (1991). "Compressive behaviour of concrete at high strain rates." Materials and Structures, Vol. 24, pp. 425-450. https://doi.org/10.1007/BF02472016
- Bischoff, P. H. and Perry, S. H. (1995). "Impact behavior of plain concrete loaded in uniaxial compression." Jounal of Engineering Mechanics, ASCE, Vol. 121, No. 6, pp. 685-693. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:6(685)
- Bolander, J. E. and Berton, S. (2004). "Simulation of shrinkage induced cracking in cement composite overlays." Cement and Concrete Composites, Vol. 26, pp. 861-871. https://doi.org/10.1016/j.cemconcomp.2003.04.001
- Bolander, J. E. and Saito, S. (1998). "Fracture analyses using spring networks with random geometry." Engineering Fracture Mechanics, Vol. 61, pp. 569-591. https://doi.org/10.1016/S0013-7944(98)00069-1
- Cadoni, E., Solomos, G. and Albertini, C. (2013). "Concrete behavior in direct tension tests at high strain rates." Magazine of Concrete Research, ICE, Vol. 65, No. 11, pp. 660-672. https://doi.org/10.1680/macr.12.00175
- Chen, J. (2011). Discrete Element Method (DEM) analysis for Hot-Mix Asphalt (HMA) mixture compaction, Ph.D. Dissertation, University of Tennessee, Knoxville, T.N., USA.
- Gatuingt, F. and Pijaudier-Cabot, G. (2002). "Coupled damage and plasticity modelling in transient dynamic analysis of concrete." International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 26, pp. 1-24. https://doi.org/10.1002/nag.188
- Grote, D. L., Park, S. W. and Zhou, M. (2001). "Dynamic behavior of concrete at high strain rates and pressures: I. Experimental Characterization." International Journal of Impact Engineering, Vol. 25, No. 9, pp. 869-886. https://doi.org/10.1016/S0734-743X(01)00020-3
- Hentz, S., Donze, F. V. and Daudevile, L. (2004). "Discrete element modelling of concrete submitted to dynamic loading at high strain rates." Computers and Structures, Vol. 82, pp. 2509-2524. https://doi.org/10.1016/j.compstruc.2004.05.016
- Hughes, B. P. and Gregory, R. (1972). "Concrete subjected to high rates of loading in compression." Magazine of Concrete Research, Vol. 24, No. 78, pp. 25-36. https://doi.org/10.1680/macr.1972.24.78.25
- Kim, K. (2011). Development of irregular lattice models for simulating rate dependent failure in concrete materials and structures, Ph.D. Dissertation, Yonsei University.
- Kim, K., Bolander, J. E. and Lim, Y. M. (2011). "Rigid-bodyspring network with visco-plastic damage model for simulating rate dependent fracture of RC structures." Applied Mechanics and Materials, Vol. 82, pp. 259-265. https://doi.org/10.4028/www.scientific.net/AMM.82.259
- Kim, K., Bolander, J. E. and Lim, Y. M. (2013). "Failure simulation of RC structures under highly dynamic conditions using random lattice models." Computers and Structures, Vol. 125, pp. 127-136. https://doi.org/10.1016/j.compstruc.2013.04.007
- Kim, K. and Lim, Y. M. (2011). "Simulation of rate dependent fracture in concrete using an irregular lattice model." Cement and Concrete Composites, Vol. 33, No. 9, pp. 949-955. https://doi.org/10.1016/j.cemconcomp.2011.01.002
- Malvar, L. J. and Ross, C. A. (1998). "Review of strain rate effects for concrete in tension." ACI Materials Journal, Vol. 95, No. 6, pp. 735-739.
- Pedersen, R. R., Simone, A. and Sluys, L. J. (2008). "An analysis of dynamic fracture in concrete with a continuum visco-elastic visco-plastic damage model." Engineering Fracture Mechanics, Vol. 75, No. 13, pp. 3782-3805. https://doi.org/10.1016/j.engfracmech.2008.02.004
- Ross, C. A., Thompson, P. Y. and Tedesco, J. W. (1989). "Splithopkinson pressure-bar tests on concrete and mortar in tension and compression." ACI Materials Journal, Vol. 86, No. 5, pp. 475-481.
- Rossi, P. (1991). "A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates." Materials and Structures, Vol. 24, pp. 422-424. https://doi.org/10.1007/BF02472015
- Toutlemonde, F. and Rossi, P. (1994). "Major parameters governing concrete dynamic behaviour and dynamic failure of concrete structures." Euro-DYMAT94, Oxford, pp. 29-30.
- Vegt, I., Weerheijm, J., Pedersen, R. R. and Sluys, L. J. (2006). "Modelling of impact behaviour of concrete - an experimental approach." Computational Modelling of Concrete Structures - EURO-C 2006, Mayrhofen, Tyrol, Austria, pp. 451-458.
Cited by
- Validation of three-dimensional irregular lattice model for concrete failure mode simulations under impact loads vol.169, 2017, https://doi.org/10.1016/j.engfracmech.2016.11.007
- Simulation of concrete tensile failure under high loading rates using three-dimensional irregular lattice models vol.101, 2016, https://doi.org/10.1016/j.mechmat.2016.08.002
- Rate Dependent Behavior of Reinforced Concrete Using Irregular Lattice Model vol.431, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/431/11/112008