Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Insulating Properties of Pressboard for High Voltage Transformer Applied the Mold of Eddy Current Loss

와전류 손실을 적용한 금형으로 제조된 초고압 변압기의 프레스보드의 절연 특성 연구

  • Suh, Wang-Byuck (Department of Mechanical Engineering, Yeungnam University)
  • 서왕벽 (영남대학교 기계공학부)
  • Received : 2015.07.11
  • Accepted : 2015.07.24
  • Published : 2015.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Some insulating materials are tested and analyzed with variables to obtain the reliable pressboard which is located to core and coil of high voltage transformer. The high voltage transformer is used in electrical power system and operating reliability. Optimization possibility of pressboard shape including electrical insulation performance could be achieved by analysis simulation. Using insulating pressboard, which is made by mold applied eddy current loss, it could be measured the influences of moisture content for electrical properties. As a result, it is to contribute to improve the performance and ensure the reliability of the pressboard by investigating electrical strength according to the variation oil temperature. In addition pressboard thickness is important design factor to ensure electrical strength in high voltage transformer.

Keywords

References

  1. B. S. Lee, J. Korean Inst. Electr. Electron. Mater. Eng., 16, 1136 (2003).
  2. C. T. Dervos, C. D. Paraskevas, and P. Skafidas, Trans. IEEE of EIM, 22, 11 (2005).
  3. H. Yoshida, Y. Ishioka, and T. Suzuki, Trans. IEEE of TEI, 22, 795 (1987).
  4. H. Z. Ding, Z. D. Wang, and P. Jarman, IEEE Trans. Inter. Conference on Solid Dielectrics, Aging and Moisture Effects on the AC Electrical Strength of Transformer Board, 106 (2007).
  5. H. Herman, A New Approach to Condition Assesment and Life Time Prediction of Paper and Oil Used as Transformer Insulation (IEEE ICSD, 2001) p. 473-476.
  6. K. Giese, IEEE FIM Electrical Strength of Pressboard Components for Transformer Insulations, 12, 29 (1996).
  7. K. Kato, IEEE Trans. on Dielectrics and Electrical Insulation, 13, 362 (2006). [DOI: http://dx.doi.org/10.1109/TDEI.2006.1624281]