Journal of the Korean Society for Advanced Composite Structures (복합신소재구조학회 논문집)

Korean Society for Advanced Composite Structures (한국복합신소재구조학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Measurements of Lathe Scrap on the Characteristics of Fiber Reinforced Cementitious Composites

섬유보강 시멘트 복합체의 특성에 미치는 선반 스크랩 규격의 영향

  • Kwon, Soon-Oh (Department of Civil Engineering, Andong National University) ;
  • Bae, Su-Ho (Department of Civil Engineering, Andong National University) ;
  • Lee, Hyun-Jin (Department of Civil Engineering, Andong National University) ;
  • Kim, Sung-Wook (Korea Institute of Civil Engineering and Building Technology (KICT)) ;
  • Park, Jung-Jun (Korea Institute of Civil Engineering and Building Technology (KICT))
  • 권순오 (안동대학교 토목공학과) ;
  • 배수호 (안동대학교 토목공학과) ;
  • 이현진 (안동대학교 토목공학과) ;
  • 김성욱 (한국건설기술연구원 인프라구조연구실) ;
  • 박정준 (한국건설기술연구원 인프라구조연구실)
  • Received : 2015.05.12
  • Accepted : 2015.06.15
  • Published : 2015.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites(FRCCs) raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manufactures and is occurred when lathe and milling works of them are conducted to process steel manufactures. Thus, the purpose of this research is to investigate the effect of measurements of lathe scrap on the characteristics of FRCCs. For this purpose, various lathe scraps were collected from processing plants of metal, and then these were processed 10mm, 20mm, and 40mm in lengths for 2mm and 4mm in widths, respectively. FRCCs containing lathe scraps were made according to their widths and lengths, and then characteristics such as the workability, compressive strength, and flexural strength of those were evaluated. As a result, it was observed from the test results that the optimum measurements of the lathe scrap for manufacturing FRCCs was 2mm in width and 40mm in length.

Keywords

References

  1. Bae, S. H., Jeon, J. T., Kwon, S. O., Lee, H. J., and Kim, S. W. (2014), "Characteristics Evaluation of Lathe Scrap for Manufacturing Fiber Reinforced Cementitious Composites," Journal of the Korean of Disaster Information, Vol. 10, No. 3, pp. 432-441. (in Korean). https://doi.org/10.15683/kosdi.2014.10.3.432
  2. Bdour, A. N. and Al-Khalayleh, Y. A. (2010), "Innovative application of scrap-tire steel cords in concrete mixes," Jordan Journal of Civil Engineering, Vol. 4, No. 1, pp.55-61.
  3. Ha, J. H., Yi, N. H., Kim, S. B., Choi, J. K., and Kim, J. H. (2010), "Experimental Study on Blast Resistance Improvement of RC Panels by FRP Retrofitting," Journal of the Korea Concrete Institute, Vol. 22, No. 1, pp. 93-102. (in Korean). https://doi.org/10.4334/JKCI.2010.22.1.093
  4. Kim, B. S., Kim, D. H., Lee, Y. D., and Lim, N. H. (2013), "The Mechanical and Chloride Penetration Properties of Concrete Mixed with Various Fiber, " Journal of the Architectural Institute of Korea Structure & Construction, Vol. 29, No. 11, pp. 45-52. (in Korean). https://doi.org/10.5659/JAIK_SC.2013.29.11.45
  5. KS D 2101 (2011), "Classification standard for iron and steel scraps," Korean Agency for Technology and Standards (KS), Korea. (in Korean).
  6. KS L ISO 679 (2006), "Methods of testing cements-Determination of strength," Korean Agency for Technology and Standards (KS), Korea. (in Korean).
  7. Ministry of Knowledge Economy. (2010), "Supply stabilizing policy of steel scrap."Korea. (in Korean).
  8. Murali, G., Vivek Vardhan, C. M., Prabu, R., Mohammed Sadaquath Ali Khan, Z., Aarif Mohamed, T., and Suresh, T. (2012), "Experimental investigation on fibre reinforced concrete using waste materials," International Journal of Engineering Research and Applications, Vol. 2, Issue 2, pp.278-283.
  9. Vijayakumar, G., Senthilnathan, P., Pandurangan, K., and Ramakrishna, G. (2012), "Impact and energy absorption characteristics of lathe scrap reinforced concrete," International Journal of Structural and Civil Engineering Research, Vol. 1, No. 1, pp.1-6.
  10. Yang, K. H. (2010), "Slump and Mechanical Properties of Hybrid Steel-PVA Fiber Reinforced Concrete," Journal of the Korea Concrete Institute, Vol. 22, No. 5, pp. 651-658. (in Korean). https://doi.org/10.4334/JKCI.2010.22.5.651

Cited by

  1. Member design and strength characteristics of the MMA mortar composites (I) vol.6, pp.3, 2015, https://doi.org/10.11004/kosacs.2015.6.3.041
  2. 선반 스크랩 보강 시멘트 복합체의 작업성 및 강도 특성 vol.20, pp.6, 2015, https://doi.org/10.11112/jksmi.2016.20.6.040