참고문헌
- Y. H. Chun and L. J. Kwon, Accelerated life test and data analysis of the silver through hole printed wiring board, The Korean Society for Quality Management, 25 (1997), 15 (in Korean)
- T. Yan and M. D. F. Wong, Recent research development in PCB layout, Proceedings of ICCAD 2010 (Proc. Of the International Conference on Computer-Aided Design), IEEE, (2010), 398
- C. F. Coombs, Ed., Printed Circuits Handbook, 6th ed. McGraw-Hill, (2007).
- M. M. Ozdal and M. D. F. Wong, Length-matching routing for high speed printed circuit boards, Proceedings of ICCAD, 2003, IEEE, 394 (2003).
- J.-W. Fang and Y.-W. Chang, Area-I/O flip-chip routing for chip package co-design, Proceedings of ICCAD 2008, IEEE, (2008), 518
- IPC-M-109, Moisture-sensitive Component Standards and Guideline Manual (Bannockburn, IL: The institute for Interconnection and Packaging Electronic Circuits, 2008)
- H. Tanaka and K. S. Kim, Introduction of reliability test technology for electronics package, J. Microelectro. & Packag. Soc., 19 (2012), 1 (in Korean)
- D. P. Seraphin, R. Lasky and C. Y. Li, Principles of Electronic Packaging, McGraw-Hill, New York, (1989).
- W. S Hong, S. B. Jung and K. B. Kim, Analysis method of metallic ion migration, Journal of KWS, 23 (2) (2005), 32 (in Korean)
- B. Rudra and D. Jennings, Failure-mechanism models for conductive-filament formation, IEEE Transactions on Reliability, 43(3) (1994), 354 https://doi.org/10.1109/24.326425
- Jungwan Bang and Changwoo Lee, Flux residue effect on the electrochemical migration of Sn-3.0Ag-0.5Cu, Journal of KWJS, 29 (5) (2011), 95 (in Korean)
- S. H. Huh, A. S. Shin and S. J. Ham, Ion-migration Failure Mechanism under Biased HAST, J. Microelectro. & Packag. Soc., 22(1) (2015), 1 (in Korean) https://doi.org/10.6117/kmeps.2015.22.1.001
- A. Shrivastava, A. Amin, B. Sood, M. Azarian and M. Pecht, Thick film resistor failures, ISTFA 2008 (Proceedings from the 34th International Symposium for Test and Failure Analysis), November 2-6 (2008), Portland, Oregon USA.