참고문헌
- Wu, B. and Cai, P., "Decoupling Analysis of a Sliding Structure Six-Axis Force/Torque Sensor," Measurement Science Review, Vol. 13, No. 4, pp. 187-193, 2013.
- Kang, D., Kim, G., Jeoung, S., and Joo, J., "Design and Evaluation of Binocular Type Six-Component Load Cell by Using Experimental Technique," Transactions of the Korean Society of Mechanical Engineers A, Vol. 21, No. 11, pp. 1921-1930, 1997. https://doi.org/10.22634/KSME-A.1997.21.11.1921
- Diddens, D., Reynaerts, D., and Van Brussel, H., "Design of a Ring-Shaped Three-Axis Micro Force/Torque Sensor," Sensors and Actuators A: Physical, Vol. 46, No. 1, pp. 225-232, 1995. https://doi.org/10.1016/0924-4247(94)00895-O
- Nagai, K., Ito, Y., Yazaki, M., Higuchi, K., and Abe, S., "Development of a Small Six-Component Force/Torque Sensor Based on the Double-Cross Structure," Journal of the Robotics Society of Japan, Vol. 22, No. 3, pp. 361-369, 2004. https://doi.org/10.7210/jrsj.22.361
- Song, A., Wu, J., Qin, G., and Huang, W., "A Novel Self-Decoupled Four Degree-of-Freedom Wrist Force/Torque Sensor," Measurement, Vol. 40, No. 9, pp. 883-891, 2007. https://doi.org/10.1016/j.measurement.2006.11.018
- Kim, H.-M., Yoon, J., and Kim, G.-S., "Development of a Six-Axis Force/Moment Sensor for a Spherical-Type Finger Force Measuring System," IET Science, Measurement & Technology, Vol. 6, No. 2, pp. 96-104, 2012. https://doi.org/10.1049/iet-smt.2010.0146
- Kim, G.-S., "Development of a Six-Axis Force/Moment Sensor with Rectangular Taper Beams for an Intelligent Robot," International Journal of Control Automation and Systems, Vol. 5, No. 4, pp. 419-428, 2007.
- Park, J.-J. and Kim, G.-S., "Development of the 6-Axis Force/Moment Sensor for an Intelligent Robot's Gripper," Sensors and Actuators A: Physical, Vol. 118, No. 1, pp. 127-134, 2005. https://doi.org/10.1016/S0924-4247(04)00538-2
- Liu, S. A. and Tzo, H. L., "A Novel Six-Component Force Sensor of Good Measurement Isotropy and Sensitivities," Sensors and Actuators A: Physical, Vol. 100, No. 2, pp. 223-230, 2002. https://doi.org/10.1016/S0924-4247(02)00135-8
- Kim, G., "Development of 6-Axis Force/Moment Sensor for a Humanoid Robot's Foot," Science, Measurement & Technology, Vol. 2, No. 3, pp. 122-133, 2008. https://doi.org/10.1049/iet-smt:20070019
- Lee, K. J. and Kim, G. S., "Design of Structure of Four-Axis Force/Torque Sensor with Parallel Step Plate Beams," Journal of Institute of Control, Robotics and Systems, Vol. 20, No. 11, pp. 1147-1152, 2014. https://doi.org/10.5302/J.ICROS.2014.14.0082
- ATI Industrial Automation, "Multi-Axis Forcre/Torque Sensor," ATI Industrial Automation, pp. 4-45, 2014.
- Kim, G.-S. and Yoon, J.-W., "Development of Calibration System for Multi-Axis Force/Moment Sensor and Its Uncertainty Evaluation," J. Korean Soc. Precis. Eng., Vol. 24, No. 10, pp. 91-98, 2007.