Abstract
Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.
최근 스마트폰을 비롯한 각종 IT 장치의 도입과 차량항법시스템의 보편화로 인하여 위치기반 공간정보 서비스의 활용이 활발해 짐에 따라, 공간정보 사용자가 요구하는 품질의 수준이 높아지게 되었다. 본 연구에서는 지상 MMS 측정자료와 항공측량자료를 통합함으로써 정밀한 3차원 공간정보 구축하는 방법을 연구하였다. 이를 위해 실험지역에서 관측한 지상 MMS 측정자료와 항공측량자료 간의 편차경향을 분석하였고 각 데이터의 편차경향이 일관되지 못한걸 확인하였다. 편차 보정 모델 결정을 위해 GPS/INS 처리결과에 포함되어 있는 외부표정정보를 직접 수정하는 방법을 선택하였고 보정모델이 사용하는 기준인 보정용 기준점 좌표의 취득방법을 분류하여 각각의 장단점을 분석하였다. 항공사진 프로젝트에서 취득한 기준점 정보를 사용하여 지상 MMS 측정자료를 보정하는 방법을 통해 지상 MMS 측정자료 사이에 존재하는 편차를 소거하였을 뿐만 아니라 항공측량자료와 지상 MMS 측정자료 사이에 존재하던 편차도 대부분 소거된 것을 확인할 수 있었다.