Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Determination Method of Ramberg-Osgood Constants for Leak Before Break Evaluation

파단전 누설 평가를 위한 Ramberg - Osgood 상수 결정법

  • Received : 2014.08.22
  • Accepted : 2015.05.04
  • Published : 2015.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a method for determining Ramberg-Osgood constants for leak-before-break evaluation was investigated. The Ramberg-Osgood constants were calculated for SA312, TP316, and SA-508 Gr.1a in an operating temperature of $316^{\circ}C$. Incremental plasticity, using stress-strain data obtained from experiment, and deformation plasticity, using the Ramberg-Osgood constants, were considered in a finite element analysis. Using incremental plasticity and deformation plasticity, J-integrals and crack opening displacement values were calculated and compared. By comparing the results of incremental plasticity and deformation plasticity, a suitable method for determining Ramberg-Osgood constants for leak-before-break evaluation was confirmed.

본 논문은 이전 연구에서 제시한 여러 가지 Ramberg-Osgood 상수 결정법을 비교하여 파단전 누설평가에 사용되기 가장 적합한 상수 결정법을 선정하였다. 비교에 사용한 재료는 운전온도인 $316^{\circ}C$에서 실험한 SA312 TP316 과 SA508 Gr.1a 이다. 상수 결정법을 선정하기 위해 실제 응력-변형률 데이터를 모두 이용하는 증분 소성 이론과 Ramberg-Osgood 상수를 이용하는 변형 소성이론을 유한요소 해석에 적용하여 계산한 J 적분과 균열 열림 변위를 비교하였다. 비교 결과에서 증분 소성 이론 결과와 가장 잘 일치하는 상수 결정법을 최종적으로 파단전 누설 평가에 적합한 방법으로 선정하였다.

Keywords

References

  1. Huh, N.S., Park, Y.J., Kim, Y.J. and Kim, Y.J., 2003, "New Engineering J and COD Estimation Methods for Axial Through-Wall Cracked Pipes," Trans. Korean Soc. Mech. Eng. A, Vol. 27, No. 2, pp. 239-246 https://doi.org/10.3795/KSME-A.2003.27.2.239
  2. Huh, N.S., Kim, Y.J. and Kim, Y.J., 2001, "Application of Enhanced Reference Stress Method to Nuclear Piping LBB Analysis: Finite Element Validation," Trans. Korean Soc. Mech. Eng. A, Vol. 25, No. 4, pp. 741-747 https://doi.org/10.22634/KSME-A.2001.25.4.741
  3. Dassault Systemes, 2013, ABAQUS User's manual, version 6.13
  4. KEPCO E&C, 2013, "Evaluation of Material Performance and Analysis of Regulation Requirement for Application of Induction Vending Pipe to Nuclear Piping Components"
  5. Kim, J.W., Choi, M.L., Lee M.Y., Nam H.S. and Kim Y. J., 2014, "Effect of Strain Rate on the Deformation and Failure Behaviors of SA508 Gr.1a Low-alloy Steel Piping Material," Trans. Korean Soc. Mech. Spring Conference, 53-54
  6. Norris, D.M. and Chexal, B., 1987, "PICEP: Pipe Crack Evaluation Program, Rev.1," Electric Power Research Institute, NP-3596-SR, Rev.1
  7. Kim, Y.J., Huh, N.S. Kim, Y.J., Choi, Y.H. and Yang, J.S., 2003, "On Relevant Ramberg-Osgood Fit to Engineering Non-Linear Fracture Mechanics Analysis" Trans. Korean Soc. Mech. Spring Conference, 170-177
  8. British Energy Generation Ltd., 2009, "R6: Assessment of the Integrity of Structures Containing Defects.", Rev. 4
  9. Kirk M.T. and Dodds R.H. Jr., 1993, "J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens," Journal of Testing and Evaluation, Vol. 21, No. 4, pp.228-238 https://doi.org/10.1520/JTE11948J
  10. Kim, Y.J., 1998, "Note on Y/T vs. n for SINTAP Procedure: Continuous and Dis-continuous Hardening," Structural Integrity Assessment Procedures for European Industry-SINTAP.