DOI QR코드

DOI QR Code

Numerical assessment of step-by-step integration methods in the paradigm of real-time hybrid testing

  • Verma, Mohit (Academy of Scientific and Innovative Research) ;
  • Rajasankar, J. (Academy of Scientific and Innovative Research) ;
  • Iyer, Nagesh R. (Academy of Scientific and Innovative Research)
  • 투고 : 2013.06.26
  • 심사 : 2015.02.16
  • 발행 : 2015.06.25

초록

Real-time hybrid testing (RTHT) involves virtual splitting of the structure into two parts: physical substructure that contains the key region of interest which is tested in a laboratory and numerical substructure that contains the remaining part of the structure in the form of a numerical model. This paper numerically assesses four step-by-step integration methods (Central difference method (CDM), Operator splitting method (OSM), Rosenbrock based method (RBM) and CR-integration method (CR)) which are widely used in RTHT. The methods have been assessed in terms of stability and accuracy for various realistic damping ratios of the physical substructure. The stability is assessed in terms of the spectral radii of the amplification matrix while the accuracy in terms of numerical damping and period distortion. In order to evaluate the performance of the methods, five carefully chosen examples have been studied - undamped SDOF, damped SDOF, instantaneous softening, instantaneous hardening and hysteretic system. The performance of the methods is measured in terms of a non-dimensional error index for displacement and velocity. Based on the error indices, it is observed that OSM and RBM are robust and performs fairly well in all the cases. CDM performed well for undamped SDOF system. CR method can be used for the system showing softening behaviour. The error indices indicate that accuracy of OSM is more than other method in case of hysteretic system. The accuracy of the results obtained through time integration methods for different damping ratios of the physical substructure is addressed in the present study. In the presence of a number of integration methods, it is preferable to have criteria for the selection of the time integration scheme. As such criteria are not available presently, this paper attempts to fill this gap by numerically assessing the four commonly used step-by-step methods.

키워드

참고문헌

  1. Blakeborough, A., Williams, M.S., Darby, A.P. and Williams, D.M. (2001), "The development of real-time substructure testing", Philosoph. Trans. Roy. Soc. London, Series A: Math. Phys. Eng. Sci., 359(1786), 1869-1891. https://doi.org/10.1098/rsta.2001.0877
  2. Bonnet, P.A., Williams, M.S. and Blakeborough, A. (2008), "Evaluation of numerical time-integration schemes for real-time hybrid testing", Earthq. Eng. Struct. Dyn., 37(13), 1467-1490. https://doi.org/10.1002/eqe.821
  3. Bursi, O.S., Gonzalez-Buelga, A., Vulcan, L., Neild, S.A. and Wagg, D.J. (2008), "Novel coupling Rosenbrock-based algorithms for real-time dynamic substructure testing", Earthq. Eng. Struct. Dyn., 37(3), 339-360. https://doi.org/10.1002/eqe.757
  4. Chang, S.Y. (2009), "Nonlinear evaluations of unconditionally stable explicit algorithms", Earthq. Eng. Eng. Vib., 8(3), 329-340. https://doi.org/10.1007/s11803-009-8115-7
  5. Chen, C. and Ricles, J.M. (2008), "Development of direct integration algorithms for structural dynamics using discrete control theory", J. Eng. Mech., 134(8), 676-683. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(676)
  6. Chen, C., Ricles, J.M., Marullo, T.M. and Mercan, O. (2009), "Real-time hybrid testing using the unconditionally stable explicit CR integration algorithm", Earthq. Eng. Struct. Dyn., 38(1), 23-44. https://doi.org/10.1002/eqe.838
  7. Cheng, Chen and Ricles, J.M. (2008), "Development of direct integration algorithms for structural dynamics using discrete control theory", J. Eng. Mech., 134(8), 676-683. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(676)
  8. Darby, A.P., Blakeborough, A. and Williams, M.S. (2001), "Improved control algorithm for real-time substructure testing", Earthq. Eng. Struct. Dyn., 30(3), 431-448. https://doi.org/10.1002/eqe.18
  9. Darby, A.P., Williams, M.S. and Blakeborough, A. (2002), "Stability and delay compensation for real-time substructure testing", J. Eng. Mech., 128(12), 1276-1284. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:12(1276)
  10. Facchinetti, A. and Bruni, S. (2012), "Hardware-in-the-loop hybrid simulation of pantograph-catenary interaction", J. Sound Vib., 331(12), 2783-2797. https://doi.org/10.1016/j.jsv.2012.01.033
  11. Horiuchi, T., Inoue, M., Konno, T. and Namita, Y. (1999), "Real-time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorber", Earthq. Eng. Struct. Dyn., 28(10), 1121-1141. https://doi.org/10.1002/(SICI)1096-9845(199910)28:10<1121::AID-EQE858>3.0.CO;2-O
  12. Lamarche, C.P., Bonelli, A., Bursi, O.S. and Tremblay, R. (2009), "A Rosenbrock-W method for real-time dynamic substructuring and pseudo-dynamic testing", Earthq. Eng. Struct. Dyn., 38(9), 1071-1092. https://doi.org/10.1002/eqe.884
  13. Lee, S.K., Park, E.C., Min, K.W., Lee, S.H., Chung, L. and Park, J.H. (2007), "Real-time hybrid shaking table testing method for the performance evaluation of a tuned liquid damper controlling seismic response of building structures", J. Sound Vib., 302(3), 596-612. https://doi.org/10.1016/j.jsv.2006.12.006
  14. Lu, X. and Zhou, Q. (2002), "Dynamic analysis method of a combined energy dissipation system and its experimental verification", Earthq. Eng. Struct. Dyn., 31(6), 1251-1265. https://doi.org/10.1002/eqe.159
  15. Nakashima, M. and Masaoka, N. (1999), "Real-time on-line test for MDOF systems", Earthq. Eng. Struct. Dyn., 28(4), 393-420. https://doi.org/10.1002/(SICI)1096-9845(199904)28:4<393::AID-EQE823>3.0.CO;2-C
  16. Nakashima, M., Kato, H. and Takaoka, E. (1992), "Development of real-time pseudo dynamic testing", Earthq. Eng. Struct. Dyn., 21(1), 79-92. https://doi.org/10.1002/eqe.4290210106
  17. Shing, P.B., Nakashima, M. and Bursi, O.S. (1996), "Application of pseudodynamic test method to structural research", Earthq. Spectra, 12(1), 29-56. https://doi.org/10.1193/1.1585867
  18. Wallace, M.I., Wagg, D.J., Neild, S.A., Bunniss, P., Lieven, N.A.J. and Crewe, A.J. (2007), "Testing coupled rotor blade-lag damper vibration using real-time dynamic substructuring", J. Sound Vib., 307(3), 737-754. https://doi.org/10.1016/j.jsv.2007.07.004
  19. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", J. Eng. Mech. Div., 102(2), 249-263.
  20. Wu, B., Bao, H., Ou, J. and Tian, S. (2005), "Stability and accuracy analysis of the central difference method for real-time substructure testing", Earthq. Eng. Struct. Dyn., 34(7), 705-718. https://doi.org/10.1002/eqe.451
  21. Wu, B., Deng, L. and Yang, X. (2009), "Stability of central difference method for dynamic real-time substructure testing", Earthq. Eng. Struct. Dyn., 38(14), 1649-1663. https://doi.org/10.1002/eqe.927
  22. Wu, B., Xu, G., Wang, Q. and Williams, M.S. (2006), "Operator-splitting method for real-time substructure testing", Earthq. Eng. Struct. Dyn., 35(3), 293-314. https://doi.org/10.1002/eqe.519

피인용 문헌

  1. Applications of a Family of Unconditionally Stable, Dissipative, Explicit Methods to Pseudodynamic Tests vol.41, pp.1, 2017, https://doi.org/10.1007/s40799-016-0151-4
  2. The multi-axial testing system for earthquake engineering researches vol.13, pp.2, 2015, https://doi.org/10.12989/eas.2017.13.2.165
  3. A novel two sub-stepping implicit time integration algorithm for structural dynamics vol.13, pp.3, 2017, https://doi.org/10.12989/eas.2017.13.3.279
  4. Highly accurate family of time integration method vol.67, pp.6, 2015, https://doi.org/10.12989/sem.2018.67.6.603
  5. Applications of the RST Algorithm to Nonlinear Systems in Real-Time Hybrid Simulation vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/5734720