한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제19권3호
  • /
  • Pages.122-129
  • /
  • 2015
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

일반강도 슬래브로 간섭받은 모서리 기둥의 유효압축강도

Effective Compressive Strength of Corner Columns with Intervening Normal Strength Slabs

  • 투고 : 2014.09.02
  • 심사 : 2014.11.05
  • 발행 : 2015.05.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 일반강도 슬래브가 기둥 사이로 지나가는 형태의 모서리 기둥에 대한 유효압축강도 예측식을 개발하고자 하였다. 예측식 개발을 위해서 고강도 기둥-일반강도 슬래브 접합부와 조적조 구조의 유사성을 이용하였으며, 이에 더하여 기둥 단면치수에 대한 슬래브 두께의 형상비를 고려하였다. 제안된 식에 의한 예측값과 실험값의 비교를 통해 신뢰도를 확인하였으며, 설계기준 및 타 연구자들에 의한 제안식과 비교를 통해 우수성을 검증하였다. 연구결과, 제안식은 예측치에 대한 실험값의 비가 평균 1.02, 표준편차 0.15를 보여 콘크리트 구조기준 (2012)을 포함한 타 유효압축강도 예측식들에 비해 정확도 및 일관성 모두 우수한 결과를 나타냈다.

In this study, a prediction model for the effective compressive strength of corner columns with intervening normal strength concrete slabs was developed. A structural analogy between high-strength concrete column-normal strength concrete slab joint and brick masonry was used to develop the prediction model. In addition, the aspect ratio of slab thickness to column dimension was considered in the models. The reliability of the new prediction model was evaluated by comparison with experimental results and its superiority was demonstrated by comparison with previous models proposed by design codes and other researchers. As a result, with average test-to-predicted ratios of 1.09, a standard deviation of 0.15, the newly developed equation provided superior predictions in terms of accuracy and consistency over all of the existing effective strength prediction approaches including KCI structural concrete design code (2012).

키워드

참고문헌

  1. ACI committee 318 (2005), Building Code Requirements for Structural Concrete and Commentary (ACI 318-05), American Concrete Institute, Farmington Hill, Michigan.
  2. ACI Committee 318 (2011), Building Code Requirements for Structural Concrete and Commentary (ACI 318-11), American Concrete Institute, Farmington Hill, Michigan.
  3. Bianchini, A. C., Woods, R. E., and Kesler, C. E. (1960), Effect of floor concrete strength on column strength, ACI Journal Proceedings, ACI, 56(5), 1149-1170.
  4. Canadian Standards Association (2004), Design of Concrete Structures (CSA A23.3-04), Canadian Standards Association, Mississauga, Ontario.
  5. European Committee of Standardization (CEN) (1996), Eurocode 6: Design of masonry structures, Part 1.1: General rules for buildings-reinforced and unreinforced masonry, ENV 1996-1-1, Brussels.
  6. Gamble, W. L., and Klinar, J. D. (1991), Tests of high-strength concrete columns with intervening floor slabs, Journal of Structural Engineering, ASCE, 117(5), 1462-1476. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:5(1462)
  7. Kaushik, H. B., Rai, D. C., and Jain, S. K. (2007), Stress-strain characteristics of clay brick masonry under uniaxial compression, Journal of Materials in Civil Engineering, ASCE, 19(9), 728-739. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(728)
  8. Kayani, M. K. (1992), Load transfer from high-strength concrete columns through lower strength concrete slabs, Ph.D. thesis, Dept. of Civil Engineering, University of Illinois, Urbana-Champaign, Ill.
  9. Ko, S. H. (2013), Seismic Performance and Flexural Over-strength of Circular RC Column, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 17(5), 49-58 (in Korean, with English abstract). https://doi.org/10.11112/jksmi.2013.17.5.049
  10. Korea Concrete Institute (2012), Structural Concrete Design Code, Korea Concrete Institute, Seoul (in Korean).
  11. Lee, J. H., Yoon, Y. S., Cook, W. D., and Mitchell, D. (2007), Benefits of using puddled HSC with fibers in slabs to transmit HSC column loads, Journal of Structural Engineering, ASCE, 133(12), 1843-1847. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:12(1843)
  12. Lee, S. C., and Mendis, P. (2004), Behavior of high-strength concrete corner columns intersected by weaker slabs with different thicknesses, ACI Structural Journal, ACI, 101(1), 11-18.
  13. McHarg, P. J., Cook, W. D., Mitchell, D., and Yoon, Y. S. (2000), Improved transmission of high-strength concrete column loads through normal-strength concrete slabs, ACI Structural Journal, ACI, 97(1), 157-165.
  14. McNary, W. S., and Abrams, D. P. (1985), Mechanics of masonry in compression, Journal of Structural Engineering, ASCE, 111(4), 857-870. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(857)
  15. Ospina, C. E., and Alexander, S. D. B. (1997), Transmission of high-strength concrete column loads through concrete floors, Structural Engineering Report No. 214, Department of Civil Engineering, University of Alberta, Edmonton, Canada.
  16. Ospina, C. E., and Alexander, S. D. B. (1998), Transmission of interior concrete column loads through floors, Journal of Structural Engineering, ASCE, 124(6), 602-610. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:6(602)
  17. Shah, A. A., Dietz, J., Tue, N. V., and Koenig, G. (2005), Experimental investigation of column-slab joints, ACI Structural Journal, ACI, 102(1), 103-113.
  18. Shu, C. C., and Hawkins, N. M. (1992), Behavior of columns continuous through concrete floors, ACI Structural Journal, ACI, 89(4), 405-414.

피인용 문헌

  1. 기둥-슬래브 접합부의 구조거동에 관한 수치해석 vol.29, pp.1, 2015, https://doi.org/10.4334/jkci.2017.29.1.077