DOI QR코드

DOI QR Code

Critical buckling load optimization of the axially graded layered uniform columns

  • Alkan, Veysel (Department of Mechanical Engineering, Pamukkale University)
  • 투고 : 2015.03.05
  • 심사 : 2015.03.30
  • 발행 : 2015.05.25

초록

This study presents critical buckling load optimization of the axially graded layered uniform columns. In the first place, characteristic equations for the critical buckling loads for all boundary conditions are obtained using the transfer matrix method. Then, for each case, square of this equation is taken as a fitness function together with constraints. Due to explicitly unavailable objective function for the critical buckling loads as a function of segment length and volume fraction of the materials, especially for the column structures with higher segment numbers, initially, prescribed value is assumed for it and then the design variables satisfying constraints are searched using Differential Evolution (DE) optimization method coupled with eigen-value routine. For constraint handling, Exterior Penalty Function formulation is adapted to the optimization cycle. Different boundary conditions are considered. The results reveal that maximum increments in the critical buckling loads are attained about 20% for cantilevered and pinned-pinned end conditions and 18% for clamped-clamped case. Finally, the strongest column structure configurations will be determined. The scientific and statistical results confirmed efficiency, reliability and robustness of the Differential Evolution optimization method and it can be used in the similar problems which especially include transcendental functions.

키워드

참고문헌

  1. Alkan, V. (2015), "Optimum buckling design of axially layered graded uniform columns", Mater. Test., 57(5), 494-500.
  2. Coello, C.A.C. and Alonso, F.F.A. (1995), "Optimal design of axially loaded non-prismatic columns via genetic algorithms", Proceedings of the 6th International Conference on Computing in Civil and Building Engineering, Berlin, Germany, July.
  3. Das, S. and Suganthan, P.N. (2011), "Differential evolution: a survey of the state-of-the-art", IEEE T Evolut. Comput., 15(1), 4-31. https://doi.org/10.1109/TEVC.2010.2059031
  4. Ertas, A.H. (2013), "Optimization of fiber-reinforced laminates for a maximum fatigue life by using the particle swarm optimization. Part II", Mech. Compos. Mater., 49(1), 107-116. https://doi.org/10.1007/s11029-013-9326-6
  5. Fu, K.C. and Ren, D. (1992), "Optimization of axially loaded non-prismatic column", Comput. Struct., 43(1), 159-162. https://doi.org/10.1016/0045-7949(92)90091-D
  6. Keller, J.B. (1960), "The shape of the strongest column", Arch. Rational. Mech. Anal., 5, 275-285. https://doi.org/10.1007/BF00252909
  7. Li, Q.S. (2003), "Effect of shear deformation on the critical buckling of multi-step bars", Struct. Eng. Mech., 15(1), 71-81. https://doi.org/10.12989/sem.2003.15.1.071
  8. Li, X.F., Xi, L.Y. and Huang, Y. (2011), "Stability analysis of composite columns and parameter optimization against buckling", Compos. Part B-Eng., 42(6), 1337-1345. https://doi.org/10.1016/j.compositesb.2011.06.012
  9. Maalawi, Y.K. (2002), "Buckling optimization of flexible columns", Int. J. Solid. Struct., 39(23), 5865-5876. https://doi.org/10.1016/S0020-7683(02)00417-1
  10. Maalawi, Y.K. (2009), "Optimization of elastic columns using axial grading concept", Eng. Struct., 31 (12), 2922-2929. https://doi.org/10.1016/j.engstruct.2009.07.017
  11. O'Rourke, M. (1977), "Buckling load for nonuniform columns", Comput. Struct., 7(6), 717-720. https://doi.org/10.1016/0045-7949(77)90025-6
  12. Mezura-Montes, E. and Coello, C.C.A. (2011), "Constraint-handling in nature-inspired numerical optimization: Past, present and future", Swarm Evol. Comput., 1(4), 173-194. https://doi.org/10.1016/j.swevo.2011.10.001
  13. Patnaik, V.S., Rao, G.V. and Gupta, A.V.S.S.K.S. (2012), "Minimum mass design of compound cantilever columns with buckling load constraint through numerical search", Int. J. Mech. Eng. Rob. Res., 1(2), 196-206.
  14. Patnaik, V.S., Rao, G.V. and Gupta, A.V.S.S.K.S. (2013), "Optimum design for minimum mass configuration of stepped cantilever compound columns with constraint on axial buckling load", I.J.S.E.R., 4(10), 956-965.
  15. Rahmanian, I., Lucet, Y. and Tesfamariam, S. (2014), "Optimal design of reinforced concrete beams: A review", Comput. Concrete., 13(4), 457-482. https://doi.org/10.12989/cac.2014.13.4.457
  16. Rao, S.S. (2009), Engineering Optimization: Theory and Practice, John Wiley & Sons, Inc, New Jersey, NJ, USA.
  17. Singh, K.V. and Li, G. (2009), "Buckling of functionally graded and elastically restrained non-uniform columns", Compos. Part B-Eng., 40(5), 393-403. https://doi.org/10.1016/j.compositesb.2009.03.001
  18. Storn, R. and Price, K. (1997), "Differential evolution-A simple and efficient heuristic for global optimization over continuous spaces", J. Global. Optim., 11(4), 341-359. https://doi.org/10.1023/A:1008202821328
  19. Sujatha, A., Jagannath, V. and Selvi (2013), "A new direction for the stability analysis of columns using unit step function- some case studies", I.J.M.C.A.R., 3(4), 63-78.
  20. Tadjbakhsh, I., and Keller, J. B. (1962), "Strongest columns and isoperimetric inequalities for eigenvalues", J. Appl. Mech., 29(1), 159-164. https://doi.org/10.1115/1.3636448
  21. Timoshenko, S. P. and Gere, J. M. (1961), Theory of Elastic Stability, McGraw-Hill, New York, NY, USA.
  22. Venkataraman, P. (2002), Applied Optimization With $Matlab^{(R)}$ Programming, 2nd Edition, John Wiley & Sons, Inc., New York, NY, USA.
  23. Venter, G. (2010), Review of Optimization Techniques, Encyclopedia of Aerospace Engineering, Eds. Richard Blockley and WeiShyy, John Wiley &Sons, Ltd. USA.
  24. Yildiz, A.R. (2013), "Comparison of evolutionary-based optimization algorithms for structural design optimization", Eng. Appl. Artif. Intel., 26(1), 327-333. https://doi.org/10.1016/j.engappai.2012.05.014
  25. Yildiz, A.R. (2013), "Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations", Appl. Soft. Comput., 13(3), 1433-1439. https://doi.org/10.1016/j.asoc.2012.01.012

피인용 문헌

  1. Optimal design of the transversely vibrating Euler-Bernoulli beams segmented in the longitudinal direction vol.44, pp.5, 2019, https://doi.org/10.1007/s12046-019-1084-2