초록
본 연구에서는 원심압축기 임펠러와 디퓨져 블레이드 형상을 반응표면법과 다목적 유전알고리즘 기법을 사용하여 최적설계 연구를 수행하였다. 임펠러와 디퓨져의 블레이드 선단과 후단의 각도와 두께를 3 구간으로 나누어 설계변수로 적용하였으며 수치해석은 상용코드인 ANSYS CFX 를 사용하였다. 실험계획법 중 많이 사용되는 중심합성계획을 이용하여 총 45 개의 설계점에 대한 값을 계산하였다. 계산된 결과를 바탕으로 반응표면을 생성하였으며 반응표면은 최적형상의 임펠러와 디퓨져를 선정하는데 이용하였다. 최적설계의 전 과정은 ANSYS DX 를 사용하였으며, 최적화의 결과로 원심압축기의 주요 성능변수인 등엔트로피 효율과 압력회복계수가 각각 0.3%, 5% 향상된 임펠러와 디퓨져 블레이드 형상을 제시하였다.
In this study, a method for optimal design of impeller and diffuser blades in the centrifugal compressor using response surface method (RSM) and multi-objective genetic algorithm (MOGA) was evaluated. A numerical simulation was conducted using ANSYS CFX with various values of impeller and diffuser parameters, which consist of leading edge (LE) angle, trailing edge (TE) angle, and blade thickness. Each of the parameters was divided into three levels. A total of 45 design points were planned using central composite design (CCD), which is one of the design of experiment (DOE) techniques. Response surfaces that were generated on the basis of the results of DOE were used to determine the optimal shape of impeller and diffuser blade. The entire process of optimization was conducted using ANSYS Design Xplorer (DX). Through the optimization, isentropic efficiency and pressure recovery coefficient, which are the main performance parameters of the centrifugal compressor, were increased by 0.3 and 5, respectively.