DOI QR코드

DOI QR Code

Case Study on the Diagnosis and Repair for Window Condensation Problems in Apartment Buildings

공동주택 창호 결로하자 진단 및 보수 사례

  • Received : 2015.01.08
  • Accepted : 2015.04.08
  • Published : 2015.04.30

Abstract

There is a high risk of condensation on the window because insulation performance is relatively poor compared to opaque components of apartment building envelope. Condensation on the window may cause problems such as obstructing a view, damage to the interior finish, freezing in a colder climates, and so on, it is necessary to be prevented. Disputes and repairs caused by window condensation problems have occurred frequently after completion of apartment buildings. However, these have been done individually and confidentially, due to the conflict of interest between construction company and residents. The aim of this study is to share the dispute and repair case of window condensation problems for helping to objectify the diagnosis and repair process in similar cases. Test methods in both field and laboratory were presented to check whether the required performance prescribed in the specifications was satisfied. Repair measures according to the test results, and performance improvement effects were also presented.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. 송승영, 실내 표면결로 방지를 위한 열교부위의 적정 단열정도 결정방법에 관한 연구, 대한건축학회논문집(계획계) 14(10), 1998.10
  2. 송승영, 강가영, 여명석, 김광우, 커튼월 시스템 벽체부의 단열재 실내측 마감재 파손 여부에 따른 결로 평가 및 내부결로 방지를 위한 효과적 마감재에 관한 연구, 대한건축학회논문집(계획계) 22(8), 2006.8
  3. 송승영, 김수미, 박효순, Low-e 코팅과 단열 스페이서 적용에 따른 알루미늄 및 PVC 프레임 복층 유리 창호시스템의 단열성능 평가, 대한건축학회논문집(계획계) 22(4), 2006.4
  4. 송승영, 임아람, 송진희, 임재한, 이규남, 김영탁, 사무소 건물 커튼월 시스템의 표면결로 방지 설계기준, 대한건축학회논문집(계획계) 28(11), 2012.11
  5. 주선경, 송승영, 단열 스페이서 적용에 따른 창호시스템의 표면결로 방지성능 평가, 대한건축학회논문집(계획계) 20(10), 2004.10
  6. 황하진, 김종엽, 이종성, 공동주택 세대내 결로방지 설계를 위한 실내외 온습도 기준 수립 연구, LHI Journal 2(3), 2011
  7. KS F 2278 창호의 단열성 시험방법, 2008
  8. KS F 2295 창호의 결로방지 성능 시험 방법, 2004
  9. LH공사 시방서 KNHC 2007, 32325 합성수지제 창호(지급자재가 아닌 경우)
  10. AAMA 1503.1 Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors, and Glazed Wall Sections, American Architectural Manufacturers Association, 2009.3
  11. ISO 15099:2003, Thermal performance of windows, doors and shading devices-Detailed calculations, 2003.11
  12. LBNL, THERM6.3/WINDOW6.3 NFRC Simulation Manual, 2011.12
  13. NFRC 500-2010 Procedure for Determining Fenestration Product Condensation Resistance Values, 2010
  14. Seung-Yeong Song, Jae-Hun Jo, Myoung-Souk Yeo, Young-Don Kim, Kyoo-Dong Song, Evaluation of inside surface condensation in Double glazing window system with in sulation spacer: A case study of residential complex, Building and Environment 42(2), Elsevier, 2007.2

Cited by

  1. Influence of Drainage Holes on Condensation Risk and Air-tightness of Windows
    An Experimental Case Study of Triple Glazing PVC Windows vol.16, pp.1, 2017, https://doi.org/10.3130/jaabe.16.83