한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제32권5호
  • /
  • Pages.423-429
  • /
  • 2015
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

LM 볼가이드 마찰력의 수학적 모델링

Mathematical Modeling of Friction Force in LM Ball Guides

  • 오광제 (한양대학교 기계공학과) ;
  • 김경호 (한국기계연구원 초정밀시스템연구실) ;
  • 박천홍 (한국기계연구원 초정밀시스템연구실) ;
  • 정성종 (한양대학교 기계공학과)
  • Oh, Kwang-Je (Department of Mechanical Engineering, Hanyang University) ;
  • Khim, Gyungho (Department of Ultra-precision Machines and Systems, Korea Institute of Machinery and Materials) ;
  • Park, Chun-Hong (Department of Ultra-precision Machines and Systems, Korea Institute of Machinery and Materials) ;
  • Chung, Sung-Chong (Department of Mechanical Engineering, Hanyang University)
  • 투고 : 2015.04.15
  • 심사 : 2015.04.23
  • 발행 : 2015.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Linear motion (LM) ball guides have good accuracy and high efficiency. They are widely applied for precision machinery such as machine tools, semiconductor fabrication machines and robots. However, friction force incurs heat between the balls and grooves. Thermal expansion due to the heat deteriorates stiffness and accuracy of the LM ball guides. For accurate estimation of stiffness and accuracy during the linear motion, friction models of LM ball guides are required. To formulate accurate frictional models of LM ball guides according to load and preload conditions, rolling and viscous frictional analyses have been performed in this paper. Contact loads between balls and grooves are derived from Hertzian contact analysis. Contact angle variation is incorporated for the precision modeling. Viscous friction model is formulated from the shear stress of lubricant and the contact area between balls and grooves. Experiments confirm validity of the developed friction model for various external load and feedrate conditions.

키워드

참고문헌

  1. KIMM, "Development of Platform Technology for Machine Accuracy Simulation II," Research Report, No. UCN011-4644.M, 2014.
  2. Kim, K. H., Park, C. H., Song, C. K., Lee, H. S., and Kim, S. W., "The Accuracy Design of LM Guide System in Machine Tools," Proc. of KSPE Spring Conference, pp. 692-695, 2000.
  3. Ohta, H. and Tanaka, K., "Vertical Stiffnesses of Preloaded Linear Guideway Type Ball Bearings Incorporating the Flexibility of the Carriage and Rail," Journal of Tribology, Vol. 132, No. 1, Paper No. 011102, 2010.
  4. Shimizu, S., "Stiffness Analysis of Linear Motion Guide System," International Journal of the Japan Society for Precision Engineering, Vol. 33, No. 3, pp. 163-167, 1999.
  5. Harris, T. A., "Rolling Bearing Analysis," John Wiley, 4th Ed., pp. 183-230, 2001.
  6. Slocum, A. H., "Precision Machine Design," Society of Manufacturing Engineers, pp. 460-50, 1992.
  7. Kim, K. H., Park, C. H., Lee, H., and Kim, S. W., "Analysis of the Motion Errors in Linear Motion Guide," J. Korean Soc. Precis. Eng., Vol. 19, No. 5, pp.139-148, 2002.
  8. Stolarski, T. A. and Tobe, S., "Rolling Contacts," John Wiley and Sons, pp. 76-80, 2000.
  9. Hamrock, B. J. and Dowson, D., "Ball Bearing Lubrication: The Elasto-hydrodynamics of Elliptical Contacts," John Wiley and Sons, pp. 187-218, 1981.
  10. Oh, K., Park, C. H., and Chung, S. C., "Identification of Static and Dynamic Frictions in Ballscrew Servos," Proc. of the ASPE Annual Meeting, 2014.
  11. THK Co., Ltd., "THK Linear Motion System Catalog," 2012.
  12. Weisberg, S., "Applied Linear Regression," John Wiley and Sons, pp. 194-206, 2005.