참고문헌
- F. P. Miller, 2009, Turbocharger, Alphascript Publishing.
- C. DellaCorte, V. Lukaszewicz, M. J. Valco, K. C. Radil, and H. Heshmat, 2000, "Performance and Durability of High Temperature Foil Air Bearings for Oil-Free Turbomachinery," STLE Tribology Transactions, 43(4) 774-780. https://doi.org/10.1080/10402000008982407
- K. Radil, S. Howard, and B. Dykas, 2002, "The Role of Radial Clearance on the Performance of Foil Air Bearings," STLE Tribology Transactions, 44(4), pp. 485-490.
- C. DellaCorte, and M. J. Valco, 2000, "Load Capacity Estimation of Foil Air Journal Bearings for Oil-Free Turbomachinery Applications," Proceedings fo ASME/STLE Joint Tribology Conference, 00-TC-4.
- H. Heshmat, J. A. Walowit, and O. Pinkus, 1983 "Analysis of Gas-Lubricated Foil Journal Bearings," ASME Journal of Lubrication Technology, 105 pp. 647-655. https://doi.org/10.1115/1.3254697
- H. Heshmat, 1991, "A Feasibility Study on the Use of Foil Bearings in Cyrogenic Turbopumps," AIAA, Paper No. AIAA-91- 2103-CP.
- H. Heshmat, and O. Hermel, 1993, "Compliant Foil Bearing Technology and Their Application to High Speed Turbomachinery," The 19th Leeds-Lyon Symposium on Thin Film in Tribology, pp. 559-575.
- L. -Y. Xiong, G. Wu, Y. Hou, L. -Q. Liu, M. -F. Ling, and C. -Z. Chen, 1997, "Development of Aerodynamic Foil Journal Bearings for a High Speed Cryogenic Turboexpander," Cryogenics, 37 221-227. https://doi.org/10.1016/S0011-2275(97)00012-X
- S. A. Howard, "Rotordynamics and Design Methods of An Oil-free Turbocharger," NASA/CR-1999-208689.
- H. Heshmat, J. F. Walton, C. Dellacorte, and M. Valco, 2000, "Oil-free Turbocharger Demonstration Paves Way to Gas Turbine engine Applications," Proceedings of the ASME Turbo Expo, ASME 2000-GT-620.
- T. H. Kim, and L. San Andres, 2008, "Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data," ASME Journal of Engneering for Gas Turbines and Power, 130 (1) , 012504. https://doi.org/10.1115/1.2770494
- D. J. Park, C. H. Kim, G. H. Jang, and Y. B. Lee, 2008, "Theoretical considerations of static and dynamic characteristics of air foil thrust bearing with tilt and slip flow," Tribology International, Vol. 41, No. 4, pp. 282-295. https://doi.org/10.1016/j.triboint.2007.08.001
- N. S. Lee, 2003, A Study on the Performance and Stability of Air Bump Foil Bearing, PhD Thesis, Hanyang University.
-
Y.-B. Lee, D.-J. Park, J. H. Jo, and C. H. Kim, 2007, "High Temperature Lubricants for Air Foil Bearings: Friction and Wear Characteristics of Corona Series from 25 to
$1,000\;^{\circ}C$ ," Proceedings of STLE Annual Meeting, Philadelphia, USA.
피인용 문헌
- Feasibility study of a turbocharger rotor supported by air foil bearings with diameter of 17 mm focusing on rotordynamic performance pp.2041-2991, 2019, https://doi.org/10.1177/0954407018758134