Design & Manufacturing

  • 제9권1호
  • /
  • Pages.14-17
  • /
  • 2015
  • /
  • 2800-0323(pISSN)
  • /
  • 2733-452X(eISSN)
한국금형공학회 (Korean Society of Die & Mold Engineering)
권호 표지

사출 성형 조건에 따른 PC 색상별 수축률 편차에 관한 연구

A Study on the Shrinkage Deviation in PC-Collors by the Injection Molding Conditions

  • 정상훤 (한국기술교육대학교 메카트로닉스공학과) ;
  • 유중학 (한국기술교육대학교 메카트로닉스공학과) ;
  • 홍청민 (한국기술교육대학교 메카트로닉스공학과) ;
  • 정현석 (한국기술교육대학교 대학원 메카트로닉스공학과)
  • Jung, Sang-Hwon (Department of Mechatronics Engineering, Korea University of Technology Education) ;
  • Yoo, Joong-Hak (Department of Mechatronics Engineering, Korea University of Technology Education) ;
  • Hong, Cheong-Min (Department of Mechatronics Engineering, Korea University of Technology Education) ;
  • Jung, Hyun-Suk (Department of Mechatronics Engineering, Korea University of Technology Education)
  • 심사 : 2015.02.26
  • 발행 : 2015.03.13
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the data from synthetic resin makers, there is no shrinkage deviation through injection molding. But, after making the required products, even in the same conditions, there are some size-deviation in colors. Into our research, we checked main factor by the injection molding conditions. Our tests have shown this results, there are some shrinkage deviation in collors and, in the injection molding conditions, packing pressure is the main factor.

키워드

참고문헌

  1. 권혁, 황성순, 최원종, 이재환, 김재학, "경화도에 따른 고분자 기지 복합재의 경화 수축률 거동:, 한국복합재료학회, Vol.27 No.3, 2014.
  2. 이현중, 윤승탁, 정우신, 박근, "LCD용 BLU 프레임 사출성형시 형상설계에 따른 수축률 분석" 한국생산제조시스템학회, Vol.2013 No.4, 2013.