DOI QR코드

DOI QR Code

강재마감별 부식개시 임계 비래염분량 및 부식속도 평가

Effect of Coating Materials for Steel on the Threshold of Corrosive Amount of Airborne Chlorides and the Evaluation of Their Corrosion Speeds

  • Cho, Gyu-Hwan (Fire Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Lim, Myung-Hyun (Department of Architectural and Ocean Space, Korea Maritime and Ocean University) ;
  • Park, Dong-Cheon (Department of Architectural and Ocean Space, Korea Maritime and Ocean University)
  • 투고 : 2014.09.16
  • 심사 : 2015.01.09
  • 발행 : 2015.04.20

초록

실환경에서는 비래염분 뿐만 아니라 자외선, 산성비, 산업공해 부유 물질 등의 여러 가지 복합 열화요소에 노출되어 있어 강재가 발청(發錆)하는 임계 비래염분량을 찾기에 어려움이 있다. 본 연구에서는 비래염분 시뮬레이터를 사용하여 인위적으로 비래염분 부착량을 조절하였으며 강재 마감별 5종을 대상으로 부식촉진 시험을 실시하였다. 그 결과 NC, UC, RLC-1, SS201에 각각 0.58~0.73, 7.89~8.46, 57.95~69.48, $80.73{\sim}89.35mg/dm^2$의 비래염분량을 부착시켰을 때 발청하는 것을 확인할 수 있었으며, 발청 후 부식속도는 각각 1.60, 0.36, 0.97, 0.17로 NC가 가장 빠른 부식속도를 가지는 것으로 평가 되었다.

Many studies have investigated the airborne chlorides that can weaken the overall durability of the concrete structures due to the corrosion of steel materials, but most of the studies have aimed to examine weathering by exposing various construction materials to the actual oceanic environment. However, with the exposure test, it was difficult to find the threshold of precise corrosive amount of airborne chlorides due to diverse deteriorating environmental factors such as ultraviolet ray, acid rain, floating material from industrial pollution as well as airborne chlorides. Therefore, in this study, an airborne chloride simulator was set up, in oder to conduct a corrosion accelerating test for steels coated by five different finishing materials. As results, it was found that the corrosion began to be observed at $0.58{\sim}0.73mg/dm^2$ for no-coated steel, at $7.89{\sim}8.46mg/dm^2$for urethane-coated steel, at $57.95{\sim}69.48mg/dm^2$ for red lead-coated steel, and at $80.73{\sim}89.35mg/dm^2$ for stainless-coated steel, respectively. Hence, these specific data can be considered as the threshold ranges of corrosion for each coating material for steel.

키워드

참고문헌

  1. Dimitri VV, Mark GS. Life-cycle cost analysis of reinforced concrete structures in marine environments. Structural Safety. 2003 Oct;25(4):343-62 https://doi.org/10.1016/S0167-4730(03)00014-6
  2. Andrade C. Calculation of chloride diffusion coefficients in concrete from ionic migration measurements. Cement and Concrete Research. 1993 May;23(3):724-42 https://doi.org/10.1016/0008-8846(93)90023-3
  3. Mitsuyoshi A, Dan MF, Motoyuki S. Integration of the effects of airborne chlorides into reliability-based durability design of reinforced concrete structures in a marine environment. Structure and Infrastructure Engineering. 2012 Feb;8(2):125-34 https://doi.org/10.1080/15732470903363313
  4. Morcillo M, Chico B, Mariaca L, Otero E. Salinity in marine atmospheric corrosion: its dependence on the wind regime existing in the site. Corrosion Science. 2000 Jan;42(1):91-104 https://doi.org/10.1016/S0010-938X(99)00048-7
  5. Bae SH. Estimation of Critical Chloride Content for Corrosion of Reinforcing Steel in Concrete by Accelerated Corrosion Tests. Korean Society of Civil Engineers Journal. 2007 Sep;27(5):771-6
  6. Hong IS. Estimation of Critical Chloride Content for Corrosion of Reinforcing Steel in Concrete by Cyclic Wet and Dry Salt Water Method [dissertation]. Gyeongsangbuk-do: Andong University; 2006. 55 p.
  7. Yamashita M, Miyukia H, Matsuda Y, Naganoa H, Misawa T. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century. Corrosion Science. 1994 Jan;36(2):283-99 https://doi.org/10.1016/0010-938X(94)90158-9
  8. Zhang QC. Corrosion behavior of weathering steel in marine atmosphere. Materials Chemistry and Physics. 2003 Jan;77(2):603-8 https://doi.org/10.1016/S0254-0584(02)00110-4
  9. Lee JS, Moon HY. Salinity distribution of seashore concrete structures in Korea. Building and Environment. 2006 Oct;41(10):1447-53 https://doi.org/10.1016/j.buildenv.2005.05.030
  10. McDonald RL, Unni CK, Duce RA. Estimation of atmospheric sea salt dry deposition: wind speed and particle size dependence. Journal of Geophysical Research. 1982 Feb;87(C2):1246-50 https://doi.org/10.1029/JC087iC02p01246
  11. Park DC. Development of Multidirection Incoming Salt Collector that Excludes Backward Wind. The korea Institute of Building Construction Collection of Dissertations. 2011 Dec;11(5):627-32 https://doi.org/10.5345/JKIBC.2011.11.6.627