DOI QR코드

DOI QR Code

전기차 배터리 충전기용 강인한 단위 입력 역률 제어장치

Robust and Unity Input Power Factor Control Scheme for Electric Vehicle Battery Charger

  • 투고 : 2015.01.30
  • 심사 : 2015.03.16
  • 발행 : 2015.04.20

초록

This study develops a digital control scheme with power factor correction for a front-end converter in an electric vehicle battery charger. The front-end converter acts as the boost-type switching-mode rectifier. The converter assumes the two roles of the battery charger, which include power factor control and robust charging performance. The proposed control scheme consists of a charging control algorithm and a grid current control algorithm. The scheme aims to obtain unity input power factor and robust performance. Based on the linear average model of the converter, a constant-current constant-voltage charging control algorithm that passes through only one proportional-integral controller and a current feed-forward path is proposed. In the current control algorithm, we utilized a second band pass filter, a single-phase phase-locked loop technique, and a duty-ratio feed-forward term to control the grid current to be in phase with the grid voltage and achieve pure sinusoidal waveform. Simulations and experiments were conducted to verify the effectiveness of the proposed control scheme, both simulations and experiments.

키워드

참고문헌

  1. I. Husain, "Electric and hybrid vehicles: design fundamentals," CRC Press, 2nd Edition, chap. I, 2011.
  2. C. C. Chan, A. Bouscayrol, and K. Chen, "Electric, hybrid, and fuel-cell vehicles: architectures and modeling," IEEE Trans. Vehicular Tech., Vol. 59, No. 2, pp. 589-598, Feb. 2010. https://doi.org/10.1109/TVT.2009.2033605
  3. A. Khaligh and L. Zhihao, "Battery, ultra-capacitor, fuel cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plug-in hybrid electric vehicles: state of the art," IEEE Trans. Vehicular Tech., Vol. 59, No. 6, pp. 2806-2814, July 2010. https://doi.org/10.1109/TVT.2010.2047877
  4. O. Onar and A. Khaligh, "Grid interactions and stability analysis of a distribution network with plug-in hybrid electric vehicle (PHEV) loads," in Proc. IEEE-2010 Applied Power Electronics Conference and Exposition (APEC2010), pp. 1755-1762, Feb. 2010.
  5. M. Yilmaz and P. T. Krein, "Review of the impact of vehicle-to-grid technologies on distribution systems and utility interfaces," IEEE Trans. Power Electron., Vol. 28, No. 12, pp. 5673-5689, Dec. 2013. https://doi.org/10.1109/TPEL.2012.2227500
  6. J. C. Gomez and M. M. Morcos, "Impact of EV battery chargers on the power quality of distribution systems," IEEE Trans. Power Delivery, Vol. 18, No. 3, pp. 975-981, July 2003.
  7. M. M. Morcos, N. G. Dillman, and C. R. Mersman, "Battery chargers for electric vehicles," IEEE Power Eng. Rev., Vol. 20, No. 11, pp. 8-11, Nov. 2000. https://doi.org/10.1109/39.883280
  8. A. A. Hussein and I. Batarseh, "A review of charging algorithms for nickel and lithium battery chargers," IEEE Trans. Vehicular Tech., Vol. 60, No. 3, pp. 830-838, Mar. 2011. https://doi.org/10.1109/TVT.2011.2106527
  9. C. L. Rui, W. S. Lih, S. D. Tswen, and C. T. Rong, "Sinusoidal ripple current charging strategy and optimal charging frequency study for li-ion batteries," IEEE Trans. Ind. Electron., Vol. 60, No. 1, pp. 88-97, Jan. 2013. https://doi.org/10.1109/TIE.2012.2186106
  10. S. J. Huang, B. G. Huang, and F. S. Pai, "Fast charge strategy based on the characterization and evaluation of LiFePO batteries," IEEE Trans. Power Electron., Vol. 28, No. 4, pp. 1555-1562, Apr. 2013. https://doi.org/10.1109/TPEL.2012.2209184
  11. D. Jackson, A. Schultz, S. B. Leeb, A. Mitwalli, G. Verghese, and S. R. Shaw, "A multirate digital controller for a 1.5-kW electric vehicle battery charger," IEEE Trans. Power Electron., Vol. 12, No. 6, pp. 1000-1006, Nov. 1997. https://doi.org/10.1109/63.641498
  12. M. Yilmaz and P. Krein, "Review of battery charger topologies, charging power levels and infrastructure for plug-in electric and hybrid vehicles," IEEE Trans. Power Electro., Vol. 28, No. 5, pp. 2151-2169, May 2013. https://doi.org/10.1109/TPEL.2012.2212917
  13. K. W. Klontz, A. Esser, P. J. Wolfs, and D. M. Divan, "Converter selection for electric vehicle charger systems with a high-frequency high power link," in Power Elec. Special. Conf., pp. 855-861, Jun. 1993.
  14. C. L. Nguyen, H. H. Lee, and S. J. Choi, "Power factor control scheme for zero current harmonics of battery charger in EVs," 2012 IEEE Vehicle Power and Propulsion Conference, pp. 309-314, Oct. 2012.
  15. A. Amirahmadi, A. Dastfan, and M. Rafiei, "Optimal controller design for single-phase PFC rectifiers using SPEA multi-objective optimization," Journal of Power Electronics, Vol. 12, No. 1, pp. 104-112, Jan. 2012. https://doi.org/10.6113/JPE.2012.12.1.104
  16. A. E. Aroudi, R. Haroun, A. C. Pastor, and L. M. Salamero, "Suppression of line frequency instabilities in PFC AC-DC power supplies by feedback notch filtering the pre-regulator output voltage," IEEE Trans. Circuits Syst. I, Reg. Papers, Vol. 60, No. 3, pp.796-809, Mar. 2013. https://doi.org/10.1109/TCSI.2012.2215747
  17. W. Ma, M. Wang, S. Liu, S. Li, and P. Yu, "Stabilizing the average current-mode-controlled boost PFC converter via washout-filter-aided method," IEEE Trans. Circuits Syst. II, Exp. Briefs, Vol. 58, No. 9, pp.595-599, Sep. 2011. https://doi.org/10.1109/TCSII.2011.2161170
  18. M. Pahlevaninezhad, S. Pan, S. Eren, A. Bakhshai, and P. Jain, "An adaptive nonlinear current observer for boost PFC AC/DC converters," IEEE Trans. Ind. Electron., Recently Accepted.
  19. V. M. Lopez, F. J. Azcondo, A. Castro, and R. Zane, "Universal digital controller for boost CCM power factor correction stages based on current rebuilding concept," IEEE Trans. Power Electron., Vol. 29, No. 7, pp. 3818-3829, Jul. 2014. https://doi.org/10.1109/TPEL.2013.2280077
  20. E. Figueres, J. Benavent, G. Garcera, and M. Pascual, "Robust control of power-factor-correction rectifiers with fast dynamic response," IEEE Trans. Ind. Electron., Vol. 52, No. 1, pp. 66-76, Feb. 2005. https://doi.org/10.1109/TIE.2004.841138
  21. D. M. Van de Sype, K. De Gusseme, A. P. M. Van den Bossche, and J. A. Melkebeek, "Duty-ratio feed-forward for digitally controlled boost PFC converters," IEEE Trans. Ind. Electron., Vol. 52, No. 1, pp. 108-115, Feb. 2005. https://doi.org/10.1109/TIE.2004.841127
  22. The Electropaedia, "Battery chargers and charging methods," [Online]. Available: http://www.mpoweruk-.com/chargers.htm.
  23. K. Mahabir, G. C. Verghese, V. J. Thottuvelil, and A. Heyman, "Linear averaged and sampled data models for large signal control of high power factor AC-DC converters," in Proc. Power Electronics Specialists Conf., pp. 291-299, June 1990.
  24. M. Chen and G. A. Rincon-Mora, "Accurate electrical battery model capable of predicting runtime and I-V performance," IEEE Trans. Energy Conver., Vol. 21, No. 2, pp. 504-511, June 2006. https://doi.org/10.1109/TEC.2006.874229
  25. O. L. Gonzalez and G. Buja, "Novel PLL scheme for grid connection of three-phase power converters," IEEE Sym. Diagnostics for Electrical Machines, Power Electronics & Drives 2011, pp. 372-377, Sep. 2011.
  26. M. G. Egan, D. L. O'Sullivan, J. G. Hayes, M. J. Willers, and C. P. Henze, "Power-factor-corrected single-stage inductive charger for electric vehicle batteries," IEEE Trans. Ind. Electron., Vol. 54, No. 2, pp. 1217-1226, Apr. 2007. https://doi.org/10.1109/TIE.2007.892996
  27. Electromagnetic Compatibility (EMC)-Part 3: Limits- Section 2: Limits for Harmonic Current Emissions, IEC1000-3-2 Doc., 1995.

피인용 문헌

  1. Research on the Analysis and Improvement of the Performance of the Phase-Shifted Full-Bridge Converter for Electric Vehicle Battery Charger Applications vol.20, pp.5, 2015, https://doi.org/10.6113/TKPE.2015.20.5.479
  2. A Hybrid PWM-Resonant DC-DC Converter for Electric Vehicle Battery Charger Applications vol.15, pp.5, 2015, https://doi.org/10.6113/JPE.2015.15.5.1158