초록
표면실장기술에 있어서, 자동차 정션박스 등에 삽입되는 릴레이를 칩 마운터를 이용하여 실장 하는 기술이 대두되고 있다. 그러나 릴레이가 일반 칩과 다르게 스틱 튜브로 공급되고 부품의 무게가 무거워 공급하는 기술이 필요하다. 따라서 본 연구는 스틱 튜브를 이용한 부품 공급 장치를 기존 기술보다 보다 안정적으로 공급을 할 수 있는 에어를 이용한 기계적 구조를 마련하고, 이를 활용한 시스템 알고리즘을 개선하는 기술을 제시한다. 또 개선된 에어 스틱 피더를 설비에 장착하여 사용했을 때 생산량의 증가와 폐기 비용 감소 효과를 확인할 수 있다.
In surface mount technology, the use of technology implemented using a Chip Mounter relay that is inserted into the junction box, etc. car is increasing. On the other hand, there is a need for technology to reduce the weight of the heavy component of the relay attached to different Stick Tube generally chips. Therefore, rather than existing technology, this study improved the algorithm of the system to provide a mechanical structure using Air to supply greater stability using this the component feeder utilizing the Stick Tube proposed technology. When the equipment installed in the Air Stick Feeder was used, the effectiveness, such as increased production and reduced disposal expense, was improved.