International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Strength and Durability Evaluation of Recycled Aggregate Concrete

  • Yehia, Sherif (Department of Civil Engineering, American University of Sharjah) ;
  • Helal, Kareem (Department of Civil Engineering, American University of Sharjah) ;
  • Abusharkh, Anaam (Department of Civil Engineering, American University of Sharjah) ;
  • Zaher, Amani (Department of Civil Engineering, American University of Sharjah) ;
  • Istaitiyeh, Hiba (Department of Civil Engineering, American University of Sharjah)
  • Received : 2014.10.09
  • Accepted : 2015.04.06
  • Published : 2015.06.30
⟨ Previous Next ⟩

Abstract

This paper discusses the suitability of producing concrete with 100 % recycled aggregate to meet durability and strength requirements for different applications. Aggregate strength, gradation, absorption, specific gravity, shape and texture are some of the physical and mechanical characteristics that contribute to the strength and durability of concrete. In general, the quality of recycled aggregate depends on the loading and exposure conditions of the demolished structures. Therefore, the experimental program was focused on the evaluation of physical and mechanical properties of the recycled aggregate over a period of 6 months. In addition, concrete properties produced with fine and coarse recycled aggregate were evaluated. Several concrete mixes were prepared with 100 % recycled aggregates and the results were compared to that of a control mix. SEM was conducted to examine the microstructure of selected mixes. The results showed that concrete with acceptable strength and durability could be produced if high packing density is achieved.

Keywords

References

  1. Abbas, A., Fathifazl, G., Isgor, O. B., Razaqpur, A. G., Fournier, B., & Foo, S. (2009). Durability of recycled aggregate concrete designed with equivalent mortar volume method. Cement & Concrete Composites, 31(8), 555-563. https://doi.org/10.1016/j.cemconcomp.2009.02.012
  2. Abdelfatah, A., Tabsh, S., & Yehia, S. (2011). Utlilization of recycled coarse aggregate in concrete mixes. Journal of Civil Engineering and Architecture, 5(6), 562-566.
  3. Akbarnezhad, A., Ong, K. C. G., Tam, C. T., & Zhang, M. H. (2013). Effects of the parent concrete properties and crushing procedure on the properties of coarse recycled concrete aggregates. Journal of Materials in Civil Engineering, 25(12), 1795-1802. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000789
  4. Amorim, P., De Brito, J., & Evangelista, L. (2012). Concrete made with coarse concrete aggregate: Influence of curing on durability. ACI Materials Journal, 109(2), 195.
  5. Ann, K. Y., Moon, H. Y., Kim, Y. B., & Ryou, J. (2008). Durability of recycled aggregate concrete using pozzolanic materials. Waste Management, 28(6), 993-999. https://doi.org/10.1016/j.wasman.2007.03.003
  6. Ann, T. W., Poon, C. S., Wong, A., Yip, R., & Jaillon, L. (2013). Impact of construction waste disposal charging scheme on work practices at construction sites in Hong Kong. Waste Management, 33(1), 138-146. https://doi.org/10.1016/j.wasman.2012.09.023
  7. ASTM C131. (2006). Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. West Conshohocken, PA: ASTM International.
  8. ASTM C29/29 M. (2009). Standard test method for bulk density (unit weight) and voids in aggregate. West Conshohocken, PA: ASTM International.
  9. ASTM C78/C78 M-10e1. (2010). Standard test method for flexural strength of concrete (using simple beam with thirdpoint loading). West Conshohocken, PA: ASTM International.
  10. ASTM C136. (2011a). Standard test method for sieve analysis of fine and coarse aggregates ASTM West Conshohocken, PA: ASTM International.
  11. ASTM C496/C496 M. (2011b). Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.
  12. ASTM C127. (2012a). Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate. West Conshohocken, PA: ASTM International.
  13. ASTM C1202. (2012b). Standard test method for electrical indication of concrete's ability to resist chloride ion penetration. West Conshohocken, PA: ASTM International.
  14. ASTM C33/C33. M (2013a). Standard specification for concrete aggregates. West Conshohocken, PA: ASTM International.
  15. ASTM C88. (2013b). Standard test method for soundness of aggregates by use of sodium sulfate or magnesium sulfate. West Conshohocken, PA: ASTM International.
  16. Berndt, M. L. (2009). Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate. Construction and Building Materials, 23(7), 2606-2613. https://doi.org/10.1016/j.conbuildmat.2009.02.011
  17. Bodet, R. (2014). Review French/European standards and regulations. 08/07/2014 http://navier.enpc.fr/IMG/pdf/Standards_and _regulation_R-BODET.pdf.
  18. Braunschweig, A., Kytzia, S., & Bischof, S. (2011). Recycled concrete: Environmentally beneficial over virgin concrete?, www.lcm2011.org.
  19. BSI EN 12390-6:2009. (2010a). Testing hardened concrete Compressive strength of test specimens. British Standard Institute.
  20. BSI EN 1097-2:2010. (2010b). Tests for mechanical and physical properties of aggregates: Methods for the determination of resistance to fragmentation. London, UK: British Standards Institute.
  21. BSI 812-105.2. (1990). Method for determination of particle size: Elongation index of coarse aggregate. London, UK: British Standard Institute.
  22. Cabral, A. E. B., Schalch, V., Dal Molin, D. C. C., & Ribeiro, J. L. D. (2010). Mechanical properties modeling of recycled aggregate concrete. Construction and Building Materials, 24(4), 421-430. https://doi.org/10.1016/j.conbuildmat.2009.10.011
  23. Cement, Concrete, and Aggregates (2008). Use of recycled aggregate. Australia: Hong Kong Housing Authority.
  24. Chen, H.-G., & Ying, J.-W. (2011). Analysis of factors influencing durability of recycled aggregate: A review. Paper presented at the electric technology and civil engineering, Lushan.
  25. Chen, Z.-P., Huang, K.-W., Zhang, X.-G., & Xue, J.-Y. (2010). Experimental research on the flexural strength of recycled coarse aggregate concrete. Paper presented at the 2010 international conference on mechanic automation and control engineering (MACE), Wuhan, China.
  26. Corinaldesi, V. (2010). Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates. Construction and Building Materials, 24(9), 1616-1620. doi:10.1016/j.conbuildmat.2010.02.031.
  27. Corinaldesi, V., & Moriconi, G. (2009). Influence of mineral additions on the performance of 100% recycled aggregate concrete. Construction and Building Materials, 23(8), 2869-2876. https://doi.org/10.1016/j.conbuildmat.2009.02.004
  28. De Brito, J., & Saikia, N. (2013). Recycled aggregate in concrete: Use of industrial, construction and demolition waste. 445 p., London, UK: Springer.
  29. de Juan, M. S., & Gutierrez, P. A. (2009). Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Construction and Building Materials, 23(2), 872-877. https://doi.org/10.1016/j.conbuildmat.2008.04.012
  30. EU. Directive 2008/98/EC of the European Parliament and the Council of 19 November 2008 on waste and repealing certain Directives. European Union.
  31. Domingo-Cabo, A., Lazaro, C., Lopez-Gayarre, F., Serrano-Lopez, M. A., Serna, P., & Castano-Tabares, J. O. (2009). Creep and shrinkage of recycled aggregate concrete. Construction and Building Materials, 23(7), 2545-2553. https://doi.org/10.1016/j.conbuildmat.2009.02.018
  32. Eisa, A. (2014). Properties of concrete incorporating recycled post-consumer environmental wastes. International Journal of Concrete Structures and Materials, 8(3), 251-258. https://doi.org/10.1007/s40069-013-0065-9
  33. Etxeberria, M., Vazques, E., Mari, A., & Barra, M. (2007). Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research, 37(5), 735-742. https://doi.org/10.1016/j.cemconres.2007.02.002
  34. European Aggregate Association. (2010). Planning policies and permitting procedures to ensure the sustainable supply of aggregates in Europe. Austria: University of Leoben.
  35. Evangelista, L., & Brito, J. D. (2007). Mechanical behaviour of concrete made with fine recycled concrete aggregates. Cement & Concrete Composites, 29(5), 397-401. doi: 10.1016/j.cemconcomp.2006.12.004.
  36. Fathifazl, G., & Razaqpur, A. G. (2013). Creep rheological models for recycled aggregate concrete. ACI Materials Journal, 110(2), 115-126.
  37. Fathifazl , G., Abbas, A., Razaqpur, A. G., Isgor, O. B., Fournier, B., & Foo, S. (2009). New mixture proportioning method for concrete made with coarse recycled concrete aggregate. Journal of Materials in Civil Engineering, 21(10), 601-611. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(601)
  38. Fathifazl, G., Razaqpur, A. G., Isgor, O. B., Abbas, A., Fournier, B., & Foo, S. (2011). Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate. Cement & Concrete Composites, 33(10), 1026-1037. https://doi.org/10.1016/j.cemconcomp.2011.08.004
  39. Garg, P., Singh, H., & Walia, B. S. (2013). Optimum Size of Recycled Aggregate. GE-International Journal of Engineering Research. pp. 35-41, ISSN:2321-1717
  40. Gonclaves, A., Esteves, A., & Vieira, M. (2004). Influence of recycled concrete aggregate on concrete durability. Paper presented at the National Laboratory of Civil Engineering, Portugal.
  41. Gupta, Y. P. (2009). Use of recycled aggregate in concrete construction: A need for sustainable environment. Paper presented at the our world in concrete and structures, Singapore.
  42. Hansen, T. C. (1986). Recycled aggregates and recycled aggregate concrete second state-of-the-art report developments 1945-1985. Materials and Structures, 19(3), 201-246. https://doi.org/10.1007/BF02472036
  43. Henschen, J., Teramoto, A., & Lange, D. A. (2012, January). Shrinkage and creep performance of recycled aggregate concrete. In 7th RILEM international conference on cracking in pavements (pp. 1333-1340). Springer Netherlands.
  44. Kartam, N., Al-Mutairi, N., Al-Ghusain, I., & Al-Humoud, J. (2004). Environmental management of construction and demolition waste in Kuwait. Waste Management, 24(10), 1049-1059. https://doi.org/10.1016/j.wasman.2004.06.003
  45. Katz, A. (2003). Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cement and Concrete Research, 33(5), 703-711. https://doi.org/10.1016/S0008-8846(02)01033-5
  46. Knaack, A. M., & Kurama, Y. C. (2013). Design of concrete mixtures with recycled concrete aggregates. ACI Materials Journal, 110(5), 483-493.
  47. Kou, S. C., & Poon, C. S. (2012). Enhancing the durability properties of concrete prepared with coarse recycled aggregate. Construction and Building Materials, 35, 69-76. https://doi.org/10.1016/j.conbuildmat.2012.02.032
  48. Kwan, W. H., Ramli, M., Kam, K. J., & Sulieman, M. Z. (2012). Influence of the amount of recycled coarse aggregate in concrete design and durability properties. Construction and Building Materials, 26(1), 565-573. https://doi.org/10.1016/j.conbuildmat.2011.06.059
  49. Lederle, R. E., & Hiller, J. E. (2013). Reversible shrinkage of concrete made with recycled concrete aggregate and other aggregate types. ACI Materials Journal, 110(4), 423.
  50. Levy, S. M., & Helene, P. (2004). Durability of recycled aggregates concrete: A safe way to sustainable development. Cement and Concrete Research, 34(11), 1975-1980. https://doi.org/10.1016/j.cemconres.2004.02.009
  51. Limbachiya, M. C., Koulouris, A., Roberts, J. J., & Fried, A. N. (2004). Performance of Recycled Concrete Aggregate. Paper presented at the RILEM international symposium on environmental-conscious materials and systems for sustainable development
  52. Llatas, C. (2011). A model for quantifying construction waste in projects according to the European waste list. Waste Management, 31(6), 1261-1276. https://doi.org/10.1016/j.wasman.2011.01.023
  53. Lu, W., & Tam, V. W. (2013). Construction waste management policies and their effectiveness in Hong Kong: A longitudinal review. Renewable and Sustainable Energy Reviews, 23, 214-223. https://doi.org/10.1016/j.rser.2013.03.007
  54. Lu, W., & Yuan, H. (2011). A framework for understanding waste management studies in construction. Waste Management, 31(6), 1252-1260. https://doi.org/10.1016/j.wasman.2011.01.018
  55. Malesev, M., Radonjanin, V., & Marinkovic, S. (2010). Recycled concrete as aggregate for structural concrete production. Sustainability, 2(5), 1204-1225. doi:10.3390/su2051204.
  56. Manzi, S., Mazzotti, C., & Bignozzi, M. C. (2013). Short and long-term behavior of structural concrete with recycled concrete aggregate. Cement & Concrete Composites, 37, 312-318. https://doi.org/10.1016/j.cemconcomp.2013.01.003
  57. Marinkovic, S., Radonjanin, V., Malesev, M., & Ignjatovic, I. (2010). Comparative environmental assessment of natural and recycled aggregate concrete. Waste Management, Elsevier, 30(11), 2255-2264. https://doi.org/10.1016/j.wasman.2010.04.012
  58. McNeil, K., & Kang, T. H.-K. (2013). Recycled concrete aggregates: A review. International Journal of Concrete Structures and Materials, 7(1), 61-69. https://doi.org/10.1007/s40069-013-0032-5
  59. Medina, C., Zhu, W., Howind, T., Sanchez de Rojas, M. I., & Frias, M. (2014). Influence of mixed recycled aggregate on the physical-mechanical properties of recycled concrete. Journal of Cleaner Production, 68(1), 216-225. https://doi.org/10.1016/j.jclepro.2014.01.002
  60. Ministry of Natural Resources (2010). State of the aggregate resource in Ontario study. Toronto, Canada: Queen's Printer for Ontario.
  61. Naik, T. R., & Moriconi, G. (2005) Environmental-friendly durable concrete made with recycled materials for sustainable concrete construction CANMET/ACI international symposium on sustainable development of cement and concrete, Toronto, Canada, October 2005 (pp. 1-13).
  62. Neville, A. M. (1995). Properties of concrete. Harlow, NY: Pearson.
  63. Oikonomou, N. D. (2005). Recycled concrete aggregates. Cement & Concrete Composites, 27(2), 315-318. https://doi.org/10.1016/j.cemconcomp.2004.02.020
  64. Olorunsogo, F. T., & Padayachee, N. (2002). Performance of recycled aggregate concrete monitored by durability indexes. Cement and Concrete Research, 32(2), 179-185. https://doi.org/10.1016/S0008-8846(01)00653-6
  65. Otsuki, N., Miyazato, S. I., & Yodsudjai, W. (2003). Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete. Journal of Materials in Civil Engineering, 15(5), 443-451. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:5(443)
  66. Padmini, A. K., Ramamurthy, K., & Mathews, M. S. (2009). Influence of parent concrete on the properties of recycled aggregate concrete. Construction and Building Materials, 23(2), 829-836. doi:10.1016/j.conbuildmat.2008.03.006.
  67. Poon, C. S., Shui, Z. H., & Lam, L. (2004). Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Construction and Building Materials, 18(6), 461-468. https://doi.org/10.1016/j.conbuildmat.2004.03.005
  68. Qasrawi, H., & Marie, I. (2013). Towards better understanding of concrete containing recycled concrete aggregate. Advances in Materials and Science Engineering. doi: 10.1155/2013/636034.
  69. Rahal, K. (2007). Mechanical properties of concrete with recycled coarse aggregate. Building and Environment, 42(1), 407-415. doi:10.1016/j.buildenv.2005.07.033.
  70. Rao, M. C., Bhattacharyya, S. K., & Barai, S. V. (2010). Recycled aggregate concrete: A sustainable built environment. Paper presented at the ICSBE: International conference on sustainable built environment.
  71. Ryou, J. S., & Lee, Y. S. (2014). Characterization of recycled coarse aggregate (RCA) via a surface coating method. International Journal of Concrete Structures and Materials, 8(2), 165-172. https://doi.org/10.1007/s40069-014-0067-2
  72. Sagoe-Crentsil, K., Brown, T., & Taylor, A. H. (2001). Performance of concrete made with commercially produced coarse recycled concrete aggregate. Cement and Concrete Research, 31(5), 707-712. doi:10.1016/S0008-8846(00)00476-2.
  73. Silva, R. V., De Brito, J., & Dhir, R. K. (2014). Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Construction and Building Materials, 65, 201-217. https://doi.org/10.1016/j.conbuildmat.2014.04.117
  74. Silva, R. V., de Brito, J., & Dhir, R. K. (2015). Prediction of the shrinkage behavior of recycled aggregate concrete: A review. Construction and Building Materials, 77, 327-339. https://doi.org/10.1016/j.conbuildmat.2014.12.102
  75. Sim, J., & Park, C. (2011). Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate. Waste Management, 31(11), 2352-2360. doi:10.1016/j.wasman.2011.06.014.
  76. Sonawane, T. R., & Pimplikar, S. S. (2013). Use of recycled aggregate in concrete. International Journal of Engineering Research and Technology (IJERT), 2(1), 1-9.
  77. Tabsh, S. W., & Abdelfatah, A. S. (2009). Influence of recycled concrete aggregates on strength properties of concrete. Construction and Building Materials, 23(2), 1163-1167. doi:10.1016/j.conbuildmat.2008.06.007.
  78. Tam, V. W. Y. (2008). Economic comparison of concrete recycling: A case study approach. Elsevier, 52(5), 821-828. https://doi.org/10.1016/j.resconrec.2007.12.001
  79. Tam, V. W., Gao, X. F., & Tam, C. M. (2005). Microstructural analysis of recycled aggregate concrete produced from twostage mixing approach. Cement and Concrete Research, 35(6), 1195-1203. https://doi.org/10.1016/j.cemconres.2004.10.025
  80. Tam, V. W., Gao, X. F., Tam, C. M., & Chan, C. H. (2008). New approach in measuring water absorption of recycled aggregates. Construction and Building Materials, 22(3), 364-369. https://doi.org/10.1016/j.conbuildmat.2006.08.009
  81. Tam, V. W. Y., & Tam, C. M. (2007). Economic comparison of recycling over-ordered fresh concrete: A case study approach. Resources, Conservation and Recycling, 52(2), 208-218. doi:10.1016/j.resconrec.2006.12.005.
  82. Tam, V. W., Tam, C. M., & Le, K. N. (2007a). Removal of cement mortar remains from recycled aggregate using presoaking approaches. Resources, Conservation and Recycling, 50(1), 82-101. https://doi.org/10.1016/j.resconrec.2006.05.012
  83. Tam, V. W., Tam, C. M., & Wang, Y. (2007b). Optimization on proportion for recycled aggregate in concrete using twostage mixing approach. Construction and Building Materials, 21(10), 1928-1939. https://doi.org/10.1016/j.conbuildmat.2006.05.040
  84. Tepordei, V. V. (1999). Natural aggregates-Foundation of America's future. USGS: Science for a changing world.
  85. The Freedonia Group. (2012). World Construction Aggregates.
  86. Thomas, C., Setien, J., Polanco, J. A., Alaejos, P., & Sanchez de Juan, M. (2013). Durability of recycled concrete aggregate. Construction and Building Materials, 40, 1054-1065. https://doi.org/10.1016/j.conbuildmat.2012.11.106
  87. Topcu, I. B., & Guncan, N. F. (1995). Using waste concrete as aggregate. Cement and Concrete Research, 25(7), 1385-1390. doi:10.1016/0008-8846(95)00131-U.
  88. Transportation Applications of Recycled Concrete Aggregate-FHWA State of the Practice National Review 2004; U.S. Department of Transportation Federal Highway Administration: Washington, DC, 2004; pp. 1-47.
  89. Ulloa, V. A., Garcia-Taengua, E., Pelufo, M. J., Domingo, A., & Serna, P. (2013). New views on effect of recycled aggregates on concrete compressive strength. ACI Materials Journal, 110(6), 1-10.
  90. Vyas, C. M., & Bhatt, D. R. (2013). Evaluation of modulus of elasticity for recycled coarse aggregate concrete. International Journal of Engineering Science and Innovative Technology, 2(1), 26.
  91. Wardeh, G., Ghorbel, E., & Gomart, H. (2014). Mix design and properties of recycled aggregate concretes: Applicability of Eurocode 2. International Journal of Concrete Structures and Materials, 9(1), 1-20. https://doi.org/10.1007/s40069-014-0087-y
  92. Xiao, J., Li, W., Sun, Z., & Shah, S. P. (2012a). Crack propagation in recycled aggregate concrete under uniaxial compressive loading. ACI Materials Journal, 109(4), 451-462.
  93. Xiao, J., Fana, L. Y., & Huang, X. (2012b). An overview of study on recycled aggregate concrete in China (1996-2011). Construction and Building Materials, 31, 364-383. doi:10.1016/j.conbuildmat.2011.12.074.
  94. Xiao, J., Li, L., Tam, V. W., & Li, H. (2014). The state of the art regarding the long-term properties of recycled aggregate concrete. Structural Concrete, 15(1), 3-12. https://doi.org/10.1002/suco.201300024
  95. Xiao, J. Z., Li, J. B., & Zhang, C. (2006). On relationships between the mechanical properties of recycled aggregate concrete: An overview. Materials and Structures, 39(6), 655-664. https://doi.org/10.1617/s11527-006-9093-0
  96. Yang, K. H., Chung, H. S., & Ashour, A. F. (2008). Influence of type and replacement level of recycled aggregates on concrete properties. ACI Materials Journal, 105(3), 289-296.
  97. Yehia, S., Khan, S., & Abudayyeh, O. (2008). Evaluation of mechanical properties of recycled aggregate for structural applications. HBRC Journal, 4(3), 7-16.
  98. Zaharieva, R., Buyle-Bodin, F., Skoczylas, F., & Wirquin E. (2003). Assessment of the surface permeation properties of recycled aggregate concrete. Cement and Concrete Composites, 25(2), 223-232. doi:10.1016/S0958-9465(02)00010-0

Cited by

  1. Experimental Study on Tensile Creep of Coarse Recycled Aggregate Concrete vol.9, pp.3, 2015, https://doi.org/10.1007/s40069-015-0105-8
  2. Pozzolanic reaction of the waste glass sludge incorporating precipitation additives vol.17, pp.2, 2015, https://doi.org/10.12989/cac.2016.17.2.255
  3. On Probability Distribution of Chloride Diffusion Coefficient for Recycled Aggregate Concrete vol.10, pp.1, 2015, https://doi.org/10.1007/s40069-015-0123-6
  4. Evaluation of the Influence of Specific Surface Treatments of RBA on a Set of Properties of Concrete vol.9, pp.3, 2015, https://doi.org/10.3390/ma9030156
  5. 순환 잔골재 및 굵은골재를 사용한 SFRC 보의 성능 평가 vol.21, pp.2, 2017, https://doi.org/10.11112/jksmi.2017.21.2.122
  6. A study on the performance of concrete containing recycled aggregates and ceramic as materials replacement vol.271, pp.None, 2015, https://doi.org/10.1088/1757-899x/271/1/012081
  7. Brazilian Test of Concrete Specimens Subjected to Different Loading Geometries: Review and New Insights vol.11, pp.2, 2015, https://doi.org/10.1007/s40069-017-0194-7
  8. 강섬유 혼입율에 따른 순환굵은골재 사용 SFRC 보의 휨 성능 vol.33, pp.10, 2015, https://doi.org/10.5659/jaik_sc.2017.33.10.37
  9. The mechanical properties of brick containing recycled concrete aggregate and polyethylene terephthalate waste as sand replacement vol.34, pp.None, 2015, https://doi.org/10.1051/e3sconf/20183401001
  10. Mechanical and Durability Properties of Recycled Aggregate Concrete: Effect of Recycled Aggregate Properties and Content vol.30, pp.2, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0002142
  11. Manufacturing Concrete with High Compressive Strength Using Recycled Aggregates vol.30, pp.8, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0002398
  12. Five-phase modelling for effective diffusion coefficient of chlorides in recycled concrete vol.70, pp.11, 2018, https://doi.org/10.1680/jmacr.17.00194
  13. Methods of Investigating and Quality Assessing Structure of Concretes with Combined Aggregates vol.931, pp.None, 2015, https://doi.org/10.4028/www.scientific.net/msf.931.618
  14. Strength, microstructure, and thermal conductivity of the insulation wallboards prepared with rice husk fiber and recycled concrete aggregates vol.13, pp.9, 2015, https://doi.org/10.1371/journal.pone.0203527
  15. Experimental Investigation of PCC Incorporating RAP vol.12, pp.1, 2015, https://doi.org/10.1186/s40069-018-0227-x
  16. Optimization of Steam-Curing Regime for Recycled Aggregate Concrete Incorporating High Early Strength Cement—A Parametric Study vol.11, pp.12, 2015, https://doi.org/10.3390/ma11122487
  17. Fresh and Mechanical Properties of Sustainable Concrete Using Recycled Aggregates vol.803, pp.None, 2015, https://doi.org/10.4028/www.scientific.net/kem.803.239
  18. Eco-Efficient Fiber-Reinforced Preplaced Recycled Aggregate Concrete under Impact Loading vol.4, pp.2, 2015, https://doi.org/10.3390/infrastructures4020037
  19. Development of Strain-Induced Stresses in Early Age Concrete Composed of Recycled Gravel or Sand vol.17, pp.6, 2015, https://doi.org/10.3151/jact.17.319
  20. Role of recycling fine materials as filler for improving performance of concrete - a review vol.17, pp.2, 2015, https://doi.org/10.1080/14488353.2019.1626692
  21. Filler-Ability of Highly Active Metakaolin for Improving Morphology and Strength Characteristics of Recycled Aggregate Concrete vol.11, pp.4, 2015, https://doi.org/10.1007/s12633-018-0017-8
  22. Chloride Ion Invasive Behavior of Recycled Aggregate Concrete under Coupling Flexural Loading and Wetting-Drying Cycles vol.23, pp.10, 2019, https://doi.org/10.1007/s12205-019-0295-8
  23. Mechanical and fracture properties of recycled aggregate concrete in design codes and empirical models vol.20, pp.6, 2015, https://doi.org/10.1002/suco.201800335
  24. Experimental Study and Analytical Modeling on Fatigue Properties of Pervious Concrete Made with Natural and Recycled Aggregates vol.13, pp.1, 2015, https://doi.org/10.1186/s40069-018-0305-0
  25. Mechanical behavior and constitutive relationship of the three types of recycled coarse aggregate concrete based on standard classification vol.22, pp.1, 2015, https://doi.org/10.1007/s10163-019-00922-5
  26. Factibilidad del remplazo de agregados finos reciclados de demolición en las propiedades físicas de concreto estructural vol.23, pp.86, 2015, https://doi.org/10.29105/ingenierias23.86-5
  27. Suitability of recycled concrete aggregates from precast panel buildings deconstructed at expired lifespan for structural use vol.247, pp.None, 2020, https://doi.org/10.1016/j.jclepro.2019.119593
  28. Effect of Aggregate Type and Specimen Configuration on Concrete Compressive Strength vol.10, pp.7, 2015, https://doi.org/10.3390/cryst10070625
  29. Performance of Recycled Fine-Aggregate Concrete Using Novel Mix-Proportioning Method vol.32, pp.8, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003289
  30. Shear Strength of Fiber Reinforced Recycled Aggregate Concrete vol.13, pp.18, 2015, https://doi.org/10.3390/ma13184183
  31. Static and Dynamic Performance of Two Stage Concrete vol.974, pp.None, 2015, https://doi.org/10.1088/1757-899x/974/1/012034
  32. Rheological Properties of Recycled Aggregate Concrete Incorporating Supplementary Cementitious Materials vol.118, pp.6, 2015, https://doi.org/10.14359/51733126
  33. Performance analysis of recycled aggregate concrete with chemical admixture vol.22, pp.suppl1, 2021, https://doi.org/10.1002/suco.201900380
  34. Green Concrete for a Circular Economy: A Review on Sustainability, Durability, and Structural Properties vol.14, pp.2, 2021, https://doi.org/10.3390/ma14020351
  35. Experimental study on the influence of mixing time on concrete performance under different mixing modes vol.28, pp.1, 2015, https://doi.org/10.1515/secm-2021-0061
  36. Influence of Calcined Clay on the Strength Characteristics and Microstructure of Recycled Aggregate Concrete for Sustainable Construction vol.54, pp.None, 2021, https://doi.org/10.4028/www.scientific.net/jera.54.56
  37. Study on the Performance of Synergistic Preparation of Sulphoaluminate Based Recycled Concrete by RP and RCA vol.11, pp.7, 2015, https://doi.org/10.3390/cryst11070748
  38. Effect of crack and damaged zone on chloride penetration in recycled aggregate concrete: A seven-phase mesoscale numerical method vol.291, pp.None, 2015, https://doi.org/10.1016/j.conbuildmat.2021.123383
  39. Permeability of self-compacting concrete made with recycled concrete aggregates and Portland cement-fly ash-silica fume binder vol.10, pp.4, 2021, https://doi.org/10.1080/21650373.2020.1809029
  40. Toward a codified design of recycled aggregate concrete structures: Background for the new FIB MODEL CODE 2020 AND EUROCODE 2 vol.22, pp.5, 2015, https://doi.org/10.1002/suco.202000512
  41. Influence of Particle Packing Theories on Strength and Microstructure Properties of Composite Cement-Based Mortars vol.33, pp.10, 2015, https://doi.org/10.1061/(asce)mt.1943-5533.0003848
  42. Mechanical characteristics of concrete containing basalt fiber and recycled aggregate vol.889, pp.1, 2015, https://doi.org/10.1088/1755-1315/889/1/012044
  43. Utilization of Recycled Aggregate Concrete for Marine Site Based on 7-Year Field Monitoring vol.15, pp.1, 2015, https://doi.org/10.1186/s40069-021-00473-w
  44. Effects of recycled fine aggregates on properties of concrete containing natural or recycled coarse aggregates: A comparative study vol.45, pp.None, 2022, https://doi.org/10.1016/j.jobe.2021.103442
  45. Natural gravel-recycled aggregate concrete applied in rural highway pavement: Material properties and life cycle assessment vol.334, pp.None, 2015, https://doi.org/10.1016/j.jclepro.2021.130219